http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
김용필,최광일,정회경,Kim, Yong-Phil,Choi, Kwang-Il,Jung, Hoe-Kyung 한국정보통신학회 2014 한국정보통신학회논문지 Vol.18 No.2
최근 들어 검체 관리의 부실 및 병리 정보의 불일치 등으로 의료사고가 증가하고 있다. 또한, 향후 불치병 치료와 신약 개발의 결과 검증을 위해 많은 병기 조직의 수요가 예측되며, 환자의 병력, 투약 정보, 검사결과에 따른 맞춤형 의료용 병기 관리가 필요한 실정이다. 본 논문에서는 RFID를 기반하여 U-Healthcare 환경을 지원할 수 있는 바이오 병리조직 통합 프린팅 시스템을 제안하였다. 바이오 병리조직의 검사, 관리 시스템 지원을 통해 효율적 업무와 비용 절감 기대되며, 무엇보다도 의료사고를 원천적으로 방지할 수 있는 시스템으로 활용될 것이다. Although the demand for histopathological examinations has been increasing, medical accidents in management of specimens also have been increasing because most of the examinations are processed manually which can cause careless handing, confusing information and mismatching during the procedure. In the future, histopatological examination will be used frequently for handing incurable diseases and verification of new drug. Thus, efficient and error-free management system for handling personalized medical history and test results is infallibly necessary. In this paper, I have proposed an integrated printing system for informatization of histopathological examination that support the u-Healthcare environment based on RFID in near future. The proposed system supports systematization of whole examination process and information of pathological samples. This system will contribute to reduction of costs, improvement of operational efficiency, and mostly fundamental prevention of medical accidents.
김용필(Yong-Phil Kim),엄정기(Jeong-Gi Um) 한국암반공학회 2009 터널과지하공간 Vol.19 No.6
기존의 점하중시험기는 재하점간 중심축의 일치성에서 문제가 발생하는 경우가 존재하며 압력게이지를 통해서 시료에 가해지는 하중을 산정하기 때문에 정확성이 결여될 수 있는 단점이 있다. 본 연구는 원추판을 저항판과 함께 밀어 올리는 방식을 사용하고 지지 연마봉에 선형베어링을 장착하여 연속적으로 반복되는 시험에도 재하점의 축간 편심오차를 0.1 ㎜ 이하로 유지한 개량형 점하중시험기를 개발하였다. 또한 반복되는 시험에서 재하점간의 거리를 자동으로 측정하고 편심오차를 확인하기 위하여 두 개의 디지털게이지를 부착하였다. 상부 원추판 끝단에 장착한 로드셀은 시료에 가해지는 순수 하중을 측정하여 압력계 방식인 기존의 점하중시험기가 가지는 단점을 보완하였다. 개발된 개량형 점하중시험기는 화성암, 편마암, 셰일에서 선택된 표준 코어시료에 대하여 총 107회의 점하중강도시험을 수행하고 품질과 성능이 검증되었다. The accuracy of point load apparatus is depend on point to point coaxial fitting. Also, the estimation of applied point load using the pressure gauge frequently lead to erroneous results. An improved point load apparatus has been developed in this study by mounting linear bearing on polished support rod, and eccentric error of point to point axis has been sustained less than 0.1 mm even under series of extreme work load conditions. Two digital displacement gauges are attached to measure the distance from point to point with sample specimen. A load cell mounted at the end of upper conical platen measure the applied net load on sample instead of preassure gauge. Total of 107 point load tests has been achieved to assure the quality and performance of developed apparatus. This exercise turned out to be successful.
김용필(Yong-Phil Kim),이영균(Young Kyun Lee),이성국(Sung Kook Lee),엄정기(Jeong-Gi Um) 한국암반공학회 2011 터널과지하공간 Vol.21 No.3
단층대, 파쇄대 또는 풍화대가 발달한 암반은 실내시험을 위한 시료 성형이 어렵다. 기존에 현장에서 수행된 직접전단시험은 갱도 내벽의 수직반력을 이용하여 수행되었다. 이 연구에서 개발된 현장직접전단시험기는 터널내부 또는 노천의 현장상태 암반에서 시험을 수행할 수 있다. 현장직접전단시험기의 주요 구성은 전단하중 반력판 및 하중전달판, 유압실린더 시스템, 로드셀, 다단계 전단상자, 전단상자 고정장치, 수직하중 반력판 및 하중전달판, 마찰저항 감소용 롤러 등이다. 공시체는 각주형의 블록으로 최대 크기는 400×400×460 ㎜이며 현장에서 형성하는 방법 및 절차가 제시되었다. 개발된 시험기의 현장적용성 평가를 위하여 연구지역에 대한 지질공학적 조사 · 분석 연구를 통하여 성능시험을 위한 공시체 형성에 적합한 위치가 선정되었다. 현장적용 결과 개발된 현장용 시험기는 암석의 강도 및 변형과 관련하여 필요한 대부분의 정보를 제공할 수 있는 성능을 확보하였음을 확인하였다. It is very difficult to prepare a lab. test specimen from weak rock masses affected by faults, highly fractured zone or weathered zone. In conventional method of in situ direct shear test a rock block is sheared inside galleries, where reactions for the hydraulic jacks are available. A new in situ direct shear test apparatus has been developed in this study to perform the test inside galleries as well as open pit conditions. The apparatus is composed of normal and shear reaction plates including load transfer plates, hydraulic cylinder systems, load cells, multistage shear boxes with fixing devices, and needle rollers. Maximum size of the test block is 400×400×460 ㎜, and procedures of the test block preparation has been suggested. To explore the field applicability of in situ direct shear test apparatus, proper test block site was investigated by extensive geological field survey. In situ direct shear test has been successful in producing most of information related to strength and deformability of the weak rock.