http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
김시웅,최영기 중앙대학교 미래신기술연구소 2003 미래신기술연구소 논문집 Vol.12 No.1
본 논문에서는 실제 산업현장에 보다 손쉽게 빙축열조의 성능을 예측할 수 있는 프로그램 개발을 목표로, 축냉 및 방냉 운전시 브라인의 입구온도, 출구온도 및 유량 등의 관계에 따른 단순한 해석 모델을 제시하고자 하였다. 그래서 관외 착빙형 빙축열조 대해서 축냉 및 방냉과정 통한 1차원적인 모델을 개발하였고, 이를 실제의 시험 결과와 비교해서 모델의 유효성을 입증하였다. 상기 모델을 바탕으로 관 직경, 제빙 및 해빙 두께, 브라인 유량 및 입구온도의 관계에 따른 최적설계 및 제어방법에 대해서 연구하였다. 그 결과 관 직경의 감소에 따른 열전달 면적의 상승으로 인한 효과가 나타났으나, 관 직경이 최적 포인트보다 작아지면 오히려 역효과가 발생하였다. 그리고 작은 부하 변동에 대해서는 브라인 입구온도 조절만으로도 상당한 효과가 나타났으며, 상대적으로 큰 부하변동에 대해서는 입구온도와 함께 유량도 같이 제어하는 것이 효과적임을 알 수 있었다. This paper describes an effective analytic model for ice storage system, which is related to inlet and outlet temperature of brine and its flow rate when charging and discharging mode. For this study, one-dimensional models have been developed for ice-on-coil storage systems. this model was validated by the comparison of measured data. The present study shows methods of optimal design and control with respect to tube diameter, ice and water thickness during charging and discharging periods, flow rate and inlet temperature of brine. As a result of the simulation, the effect according to the increasing heat transfer area takes place if the tube diameter decreases. However the reverse effect occurs if the tube diameter is less than the optimal point. It is possible to correspond to small variation of the cooling load by only the control of inlet brine temperature. It is effective for relatively large variation of cooling load to control both inlet temperature and flow rate of brine.