http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
해상 VHF 모뎀의 송신전력 모니터링을 위한 결합기 및 정류회로 설계
김승근,성소영,임용곤,박동국,Kim, Seung-Geun,Sung, So-Young,Lim, Young-Kon,Park, Dong-Kook 한국정보통신학회 2010 한국정보통신학회논문지 Vol.14 No.12
The design of coupling and rectifying circuits for the maritime VHF digital modem is investigated in this paper. To monitor the transmitting power of the modem, a directional coupler which is used to extract a small fraction of the transmitter signal power, and a rectifying circuit which make DC voltage proportional to the coupled rf power are designed and fabricated. The parallel-coupled line coupler with directivity of above 25 dB at 160 MHz bands is designed and it is shown that the output voltage of the rectifying circuit is linearly changing from 0.85 V to 1.6 V when the transmitting power of the modem is varying from 1 W to 25 W. The proposed coupler and rectifying circuits are expected to be suitable for maritime VHF digital modem. 본 논문은 해상용 VHF 디지털 모뎀의 구성요소 중 하나인 방향성 결합기 및 정류회로의 설계에 관한 것이다. 모뎀을 통해 송신되는 전력을 모니터링하기 위해, 송신 신호의 일부를 추출하는 방향성 결합기와, 결합된 RF 신호에 비례하는 DC 전압을 만들어내는 정류회로를 설계 제작하였다. 160 MHz 대역에서 25 dB 이상의 지향성을 갖는 평행 결합 선로 결합기를 구현하여, 모뎀 송신 전력이 1 W ~ 25 W로 변할 때 정류회로의 출력 전압이 약 0.85 V ~ 1.6 V로 선형적으로 변하는 것을 확인하였다. 제안된 결합기 및 정류회로는 해상용 VHF 디지털 모뎀에 유용하게 사용될 것으로 기대된다.
천해역 취득 데이터를 이용한 수중음향통신 수신기 성능분석
김승근,김시문,윤창호,임용곤,Kim, Seung-Geun,Kim, Sea-Moon,Yun, Chang-Ho,Lim, Young-Kon 한국음향학회 2010 韓國音響學會誌 Vol.29 No.5
본 논문에서는 25 kHz의 반송파와 5 kHz의 심볼율을 갖는 QPSK (Quadrature Phase Shift Keying) 통신시스템에서 수신된 신호를 100 kHz로 샘플링하여 전송데이터를 복원하는 수중통신용 수신기의 구조에 대하여 논한다. 또한, 천해역에서 제작한 센서를 이용하여 취득한 데이터를 2:1의 비율로 간축한 후 설계한 수신기의 입력으로 하여, 결합채널등화기 출력신호의 BER (Bit Error Rate) 을 최소화하는 결합채널등화기의 FF (Feed-Forward) 및 FB (Feed-Back) 필터 탭 수 및 RLS (Recursive Least-Square) 알고리듬의 망각인자 등의 설계 파라미터를 도출하였다. 취득 신호의 전송거리는 각각 1.4 km, 2.9 km, 4.7 km이다. 분석결과 BER을 최소화하기 위한 결합채널등화기의 FF 와 FB 탭 수는 전송거리에 따라 상이하나 망각인자는 0.997에서 최적 또는 최적에 가까운 성능을 보이는 것을 확인하였다. 그러므로, 수중음향통신 수신기 설계시 망각인자, ${\lambda}$,는 0.997로 고정하고, 전송거리에 따라 최적의 성능을 갖는 결합채널등화기의 FF 필터 탭 수와 FB 필터 탭수를 가변적으로 변경할 수 있는 구조를 갖는 수신기를 설계하는 것이 바람직하다는 결론을 얻을 수 있었다. 또한, 수신기 성능 분석을 통하여 본 논문에서 고려하는 시스템에서는 16탭 길이를 갖는 간단한 형태의 필터를 161탭 길이를 갖는 정합필터 대신에 수신기의 저역통과필터로 사용하더라도 성능의 열화가 적음을 확인하였다. This paper describes an acoustic communication receiver structure, which is designed for QPSK (Quadrature Phase Shift Keying) signal with 25 kHz carrier frequency and 5 kHz symbol rate, and takes samples from received signal at 100 kHz sampling rate. Based on the described receiver structure, optimum design parameters, such as number of taps of FF (Feed-Forward) and FB (Feed-Back) filters and forgetting factor of RLS (Recursive Least-Square) algorithm, of joint equalizer are determined to minimize the BER (Bit Error Rate) performance of the joint equalizer output symbols when the acquisition data in shallow water using implemented acoustic transducers is decimated at a rate of 2:1 and then enforced to the input of receiver. The transmission distances are 1.4 km, 2.9 km, and 4.7 km. Analysis results show that the optimum number of taps of FF and FB filters are different according to the distance between source and destination, but the optimum or near optimum value of forgetting factor is 0.997. Therefore, we can reach a conclusion that the proper receiver structure could change the number of taps of FF and FB filters with the fixed forgetting factor 0.997 according to the transmission distance. Another analysis result is that there are an acceptable performance degradation when the 16-tap-length simple filter is used as a low-pass filter of receiver instead of 161-tap-length matched filter.
농촌고령자 공동급식시설의 현황 및 이용 만족도 연구 - 2014~15년 농촌고령자 공동시설지원 시범사업을 중심으로 -
김승근,Kim, Seung-Geun 한국농촌건축학회 2016 농촌건축 : 한국농촌건축학회논문집 Vol.18 No.4
This The purpose of this study is to evaluate user satisfaction with village bathhouses, selected from a two-year pilot project of common facilities for senior in rural areas from 2014 to 2015. A survey was conducted using a questionnaire to evaluate user satisfaction, and 135 questionnaires were collected from 18 common meal facilities. User satisfaction was evaluated in five categories with a five-point scale: location and spatial composition; emotions and intimacy; safety; nutrition; and maintenance and management. The results are as follows. First, when overall user satisfaction was evaluated on a five-point scale, the average score stood at 4.24 out of five points and 90.03 out of 100 points. These findings suggest that users were generally satisfied with the common meal facilities. Among five categories, scores except safety stood at four points or higher, indicating higher user satisfaction. Second, communal meal in rural areas have been carried out already but the environment for communal meal like cooking equipment, wastewater disposal, and space have been poor. However, the environment is improved through this pilot project, which has a positive effect to user satisfaction. Third, space planning for barrier-free or sanitary in storage of food containers are not adequate, which is necessary to detailed planning and concrete guideline.