술후 감염조절이 어려웠던 환자의 증례보고

김수민,여환호,김영균,김수관,서재훈,박인순,박인수,김용욱,Kim, Soo-Min,Yeo, Hwan-Ho,Kim, Young-Kyun,Kim, Su-Gwan,Seo, Jae-Hoon,Park, In-Soon,Park, In-Soo,Kim, Young-Uk 대한악안면성형재건외과학회 1997 Maxillofacial Plastic Reconstructive Surgery Vol.19 No.1

Treatment of infected mandibular fracture is confronted with various difficult problem, e.g. nosocomial wound infection, non-union of fracture, osteomyelitis. Recently, nosocomial infection has become a major health problem because of excessive morbidity, personal distress, and cost. Frequently, isolated causative microorganisms of nosocomial infection were staphylococcus aureus, pseudomonas aeruginosa, klebsiella species. The various manifestation of the disease related to the pathogenesis and the clinical course tend to give a bad prognosis after operation. This is a report of case that post-operative infected mandibular fracture in 53-year-old man was not healed even through aggressive I & D and antibiotic treatment.

멜라민 화합물을 이용한 산화 그래핀 도핑 및 특성 평가

김수민,김현,김소양,한종훈,Kim, Sumin,Kim, Hyun,Kim, So Yang,Han, Jong Hun 한국재료학회 2019 한국재료학회지 Vol.29 No.11

In this paper, nitrogen-doped reduced graphene oxide(rGO) is obtained by thermal annealing of nitrogen-containing compounds and graphene oxide (GO) manufactured by modified Hummers' method. We use melamine as a nitrogen-containing compound and treat GO thermally with melamine at over $800{\sim}1,000^{\circ}C$ and 1 ~ 3 hr under Ar atmosphere. The electrical conductivity of doped rGO is measured by 4-point probe method. As a result, nitrogen contents on rGO are found to be in the range of 2.5 to 12.5 at% depending on the doping conditions after thermal annealing. The main doping site on graphene oxide is changed from pyridinic-N and pyrrolinic N to the graphitic site as the heat treatment temperature increases. The electrical conductivity of doped rGO increases as the N doping content increases. As the thermal treatment time increases, the change of both total doping contents and doping sites is slight and the surface resistance is remarkably reduced, which is caused by healing effects of doped graphene oxide at high temperature.

2단 실린더형 싸이클론의 물 및 오일 액적 제거 성능 분석 연구

김수민,김학준,김명준,한방우,우창규,김용진,Kim, Sumin,Kim, Hak-Joon,Kim, Myungjoon,Han, Bangwoo,Woo, Chang Gyu,Kim, Yong-Jin 한국입자에어로졸학회 2017 Particle and Aerosol Research Vol.13 No.3

A novel two stage cylindrical cyclone was developed for a 3 phase separator in shale oil production industry. The cyclone performance was compared with a cone type cyclone and multi cyclone at the same experimental condition using water and oil mists generated by a humidifier and atomizer at the flow rate 1 to $2m^3/min$. The removal efficiency of total suspended water droplets by the novel cyclone, calculated using inlet and outlet concentrations measured by an optical particle counter, was 99% which is higher than 90% of oil droplet removal efficiency at $2m^3/min$. It might be due to the evaporation of small water droplets during the tests. The water and oil droplet removal performance of the novel cyclone based on the quality factor which is a function of pressure drop and removal efficiency was the highest among three cyclones. The results indicate that the cyclone could be an economical device to remove water and oil mists from shale gas generation processes where a huge three phase separator is commonly used.

광원의 특성에 따른 Boron-doped p-type Cz-Si 태양전지의 광열화 현상 분석

김수민,배수현,김영도,박성은,강윤묵,이해석,김동환,Kim, Soo Min,Bae, Soohyun,Kim, Young Do,Park, Sungeun,Kang, Yoonmook,Lee, Haeseok,Kim, Donghwan 한국재료학회 2014 한국재료학회지 Vol.24 No.6

When sunlight irradiates a boron-doped p-type solar cell, the formation of BsO2i decreases the power-conversion efficiency in a phenomenon named light-induced degradation (LID). In this study, we used boron-doped p-type Cz-Si solar cells to monitor this degradation process in relation to irradiation wavelength, intensity and duration of the light source, and investigated the reliability of the LID effects, as well. When halogen light irradiated a substrate, the LID rate increased more rapidly than for irradiation with xenon light. For different intensities of halogen light (e.g., 1 SUN and 0.1 SUN), a lower-limit value of LID showed a similar trend in each case; however, the rate reached at the intensity of 0.1 SUN was three times slower than that at 1 SUN. Open-circuit voltage increased with increasing duration of irradiation because the defect-formation rate of LID was slow. Therefore, we suppose that sufficient time is needed to increase LID defects. After a recovery process to restore the initial value, the lower-limit open-circuit voltage exhibited during the re-degradation process showed a trend similar to that in the first degradation process. We suggest that the proportion of the LID in boron-doped p-type Cz-Si solar cells has high correlation with the normalized defect concentrations (NDC) of BsO2i. This can be calculated using the extracted minority-carrier diffusion-length with internal quantum efficiency (IQE) analysis.

상용 유기용매 나노여과막 성능분석 및 비교

김수민,송건탁,김정,Kim, Sumin,Song, Guntak,Kim, Jeong F. 한국막학회 2021 멤브레인 Vol.31 No.4

In this work, we tested commercial organic solvent nanofiltration (OSN) membranes using both in-house dead-end and crossflow systems. Four different crosslinked polyimide Duramem (DM) OSN membranes with various MWCO (molecular weight cut off) values were tested in organic solvents such as ethanol, N,N-dimethylformamide, acetone and acetonitrile. The membranes exhibited more reliable and reproducible performance in the crossflow system, and the performance changed significantly depending in the physical properties of the testing solvent. This is due to the initial stabilization period via pressure-induced compaction phenomenon, which can be vastly different between membrane samples. Hence, to obtain reliable and reproducible results, crossflow system is the preferred choice. 본 연구에서는 Dead-end와 Crossflow 시스템을 사용하여 유기용매 나노여과(Organic Solvent Nanofiltration, OSN) 상용분리막의 성능을 분석하였다. 가교된 polyimide 소재 기반의 Duramem (DM) OSN 분리막의 성능을 ethanol, dimethylformamide (DMF), acetone, acetonitrile 용매에서의 성능을 분석하였다. 네 종류의 분획분자량 성능을 갖는 DM 분리막의 성능을 평가하였을 때 dead-end보다 Crossflow에서 조금 더 정확하고 신뢰성 높은 결과를 얻을 수 있었으며, 동일한 분리막이더라도 용매의 특성에 따라 투과도와 선택도 차이가 크게 난다는 것을 확인할 수 있었다. 이는 압밀화현상으로 인한 초기 안정화 기간의 차이 때문인 것으로 판단되며 분리막마다 안정화기간이 다르므로 신뢰성 높은 결과를 얻기 위해선 Crossflow 시스템을 활용하는 것이 더 적합한 것으로 보인다.

분산 안테나 시스템에 기반한 무선 액세스망 가상화

김수민,정방철,Kim, Su Min,Jung, Bang Chul 한국정보통신학회 2012 한국정보통신학회논문지 Vol.16 No.10

본 논문에서는 다수 무선 접속 기술 (Radio Access Technology; RAT)이 통합되어 운용되는 셀룰러 네트워크에서 차세대 이동통신 네트워크 진화 방향인 디지털 유닛 (DU)-라디오 유닛 (RU) 분리 구조를 기본으로 무선 액세스 네트워크 가상화 알고리즘을 제안한다. 제안 무선 액세스 네트워크 가상화 알고리즘은 크게 기본 액세스 네트워크 가상화, RAT 가상화, 액세스 경로 이주 알고리즘으로 구성되고, 순차적인 수행을 통하여 최종 무선 액세스 네트워크 가상화가 이루어진다. 제안 무선 액세스 네트워크 가상화 알고리즘은 3GPP LTE와 WiMAX의 두 무선 접속 기술을 예제로 한 시스템 레벨 시뮬레이션을 통하여 시스템 수율 측면에서 성능이 평가된다. 이 때, 네트워크 트래픽 로드의 비대칭성에 따른 두 가지 시나리오를 고려하고, 제안 무선 액세스 네트워크 가상화 알고리즘은 비대칭적 네트워크 트래픽 로드와 사용자 분포 상황에서도 상당한 성능 이득을 성취한다. In this paper, we propose a wireless access network virtualization algorithm based on a digital unit (DU)-radio unit (RU) separated network structure in a cellular network with multiple radio access technologies (RATs). The proposed wireless access network virtualization algorithm consists of a baseline access network virtualization, RAT virtualization, and access path migration algorithms. Final wireless access network virtualization is performed by sequentially performing these procedures. Through system-level simulations which assume 3GPP LTE and WiMAX systems, the performance of the proposed wireless access network virtualization is evaluated in terms of system throughput for two scenarios according to asymmetry of network traffic load. Numerical results show that our proposed wireless access network virtualization algorithm achieves significant system throughput gain even in asymmetric traffic load and user distribution situations.

고상반응법에 의한 TiO₂-SnO-ZnO의 주황 안료 합성에 관한 연구

김수민,김응수,조우석,Kim, Soomin,Kim, Ungsoo,Cho, Woo Seok 한국결정성장학회 2016 韓國結晶成長學會誌 Vol.26 No.5

본 연구에서는 납이나 크롬이 함유되지 않은 친환경적인 물질의 새로운 주황 무기 안료를 개발하고자 하였다. 고상반응법을 이용하여 LPG와 Air를 이용한 환원분위기에서 $TiO_2-SnO-ZnO$계 주황색 무기 안료를 합성하였다. 합성 된 안료들의 특성을 분석하기 위하여 표색계 값인 $L^*a^*b^*$ 값을 측정 후, XRD를 이용하여 결정 상을 분석하였고, SEM을 이용하여 미세구조 관찰하였으며, XPS를 이용하여 원소들의 산화가 상태를 분석하였다. 고상 반응법으로 합성 후 열처리한 $TiO_2-SnO-ZnO$ 안료는 yellow에서 orange-red 사이의 색을 가진다. $TiO_2-SnO-ZnO$ 안료의 결정상 분석 결과, 5가지의 결정상이 혼재하는 것을 볼 수 있는데, $SnO_2$가 cubic과 tetragonal 구조 중 어떤 결정 구조를 가지는지가 발색의 가장 중요한 요인으로 작용하는 것을 확인하였다. XPS를 이용하여 원소들의 산화가 상태를 분석한 결과, $Sn^{4+}$의 비율이 높을수록 안료가 rYR에 가까운 색을 가지는 것을 확인할 수 있다. In this study, new composition of orange color pigment was developed by replacing formerly used lead and chromium with environment-friendly elements. $TiO_2-SnO-ZnO$ composite was synthesized using the solid state reaction under the reducing atmosphere with the LPG and air mixture gas. The synthesized pigments were characterized by spectrophotometer, X-ray Diffraction (XRD), Scanning Electron Microscopy (SEM) and X-ray Photoelectron Spectroscopy (XPS). The colorimetric analysis of pigments exhibited color values ranging from yellow to orange-red. Five different crystalline phases were formed after the heat treatment for 4 and 6 hours. The color of pigments was strongly influenced by the crystalline structure of $SnO_2$, having either cubic or tetragonal structure. The oxidation state study of elements revealed that the color of pigment is getting close to rYR with the increase of $Sn^{4+}$ ratio.

임플란트와 레진 클래스프를 이용한 심미 가철성 국소의치 증례

김수민,전영찬,정창모,윤미정,허중보,Kim, Su-Min,Jeon, Young-Chan,Jeong, Chang-Mo,Yun, Mi-Jung,Huh, Jung-Bo 대한치과보철학회 2015 대한치과보철학회지 Vol.53 No.1

For the rehabilitation of fully edentulous patients, implant-supported removable partial dentures can be considered as one of the treatment options with complete dentures or implant-supported overdentures. If removable partial dentures are used in combination with a small number of implants placed in strategically important positions, it can offer additional stability, retention and support through implants and reduce a burden of surgical procedures compared with fixed implant-supported prostheses with extensive implant placement. Moreover, the economical benefit can be expected as well. The purpose of this case report is to present a treatment in which an implant-supported removable partial denture was fabricated considering residual alveolar bone status and demands after teeth loss in a patient who had been using a distal extension removable partial denture for a long period of time. In anterior area, fixed prostheses were fabricated with implant placement and in posterior area, short implants provide only support for the removable partial denture. In addition, denture base and clasp were made of thermoplastic acrylic resin. Finally, functionally and aesthetically satisfying treatment results can be achieved. 완전 무치악 환자의 수복 시 총의치나 임플란트 지지 피개의치와 더불어 임플란트를 지대치로 이용하는 국소의치가 치료 방법의 하나로 고려될 수 있다. 적은 수의 임플란트를 전략적으로 중요한 위치에 식립한 후 가철성 국소의치로 수복할 경우, 임플란트를 통해 안정을 얻고 부가적으로 유지 및 지지를 확보할 수 있을 뿐만 아니라 광범위한 임플란트 식립을 통한 고정성 보철물에 비해 환자의 수술 부담을 줄여줄 수 있으며, 치료비용 절감 효과도 기대할 수 있다. 본 증례는 오랫동안 국소의치를 사용해 온 환자에서 치아 상실 후 잔존 치조골의 상태 및 환자의 요구를 고려하여 임플란트 지지 국소의치를 제작한 증례로서 전치부에 식립한 임플란트는 고정성 보철물로 수복하고 구치부의 짧은 임플란트는 지지 기능만 부여하였다. 또한 의치상과 클래스프를 열가소성 아크릴 레진으로 제작함으로써 기능적, 심미적으로 만족스러운 치료 결과를 얻었기에 이를 보고하는 바이다.

도자기와의 물성 비교를 통한 옹기의 기공 형성 원인 분석

김수민,노형구,김응수,조우석,Kim, Soomin,No, Hyunggoo,Kim, Ungsoo,Cho, Woo Seok 한국세라믹학회 2014 한국세라믹학회지 Vol.51 No.1

Onggi, which is described as a breathing pottery, has strongly influenced the traditional food culture in Korea. In this study Onggi is compared to porcelains including celadon and white porcelain to analyze the sources of pore formation. The differences in starting materials are examined for chemical and mineralogical compositions, particle size and distribution. The gas permeability of the fired samples is correlated to the matrix microstructure. The broad particle size distribution and high iron oxide content of Onggi are revealed as the major cause for the pore formation. Open pores are formed with large particles in the Onggi body while closed pores have a high iron oxide concentration. The Onggi body with increased open pores leads to the high gas permeability.

월경곤란증의 자하거 약침효과에 관한 연구

김수민,장선희,김철홍,윤현민,송춘호,안창범,장경전,Kim, Su-Min,Jang, Sun-Hee,Kim, Cheol-Hong,Youn, Hyoun-Min,Song, Choon-Ho,Ahn, Chang-Beohm,Jang, Kyung-Jeon 대한약침학회 2008 Journal of pharmacopuncture Vol.11 No.3

Objective: This study was designed to evaluate the effect of Hominis placenta Pharmacopuncture treatment on Dysmenorrhea of Women. Methods: 49 subjects who were suffering from dysmenorrhea volunteered to answer the MMP(Measure of Menstrual Pain) and MSSL(Menstrual Symptom Severity List) questionnaire. They were divided into two groups, a Hominis placenta Pharmacopuncture treatment group(Experiment al group, n=25) and a Normal Saline(N/S) treatment group(Control group, n=24). The two groups were injected on the $CV_4,\;S_{36},\;Sp_9$ and $Sp_6$ acupuncture point. They were treated totally five times depending on the individual menstruation cycles. The scores of MMP and MSSL were measured overall three times before and after the menstruation cycle. The collected data were analyzed as paired t-test, independent t-test using SPSS 12.0 WIN Program. Results: As a result of the evaluation by MMP and MSSL, a significant improvement on dysmenorrhea was made in the two groups(p<0.05), and both scores of Experiment group were decreased more than Control group. But there was no significant difference between the two groups. Conclusions: The Hominis placenta Pharmacopuncture treatment and the Normal Saline treatment were effective in decreasing the symptom of Dysmenorrhea.