http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
김석곤,왕영진,김용진,김성욱,이인현,이기서,Kim, Seok-Kon,Wang, Young-Jin,Kim, Yong-Jin,Kim, Sung-Ouk,Lee, In-Hyun,Lee, Key-Seo 한국전자통신학회 2011 한국전자통신학회 논문지 Vol.6 No.6
미국을 비롯한 선진국들은 배치 운용중인 개발 무기체계의 야전 운용자료를 수집 분석하여 신뢰도 유지여부를 확인하고 설계 재반영, 군수지원 요소 최적화를 위한 기초 경험자료 등으로 잘 활용하고 있으나 국내에서는 적용이 미흡한 실정이다. 따라서 본 논문에서는 국내 연구개발후 함정에 배치 운용 중인 ${\bigcirc}{\bigcirc}$대함유도탄을 대상으로 최근 6년간 ${\bigcirc}{\bigcirc}{\bigcirc}$발에 대한 구성품별 고장현황 등이 포함된 야전 운용자료를 수집하여 Weibull++ v7 소프트웨어에 입력후 모수적 추정방법을 이용하여 신뢰도를 분석하였다. 분석결과를 개발단계에서 분석된 유도탄과 구성품별 MTBF와 비교하여 초기신뢰도 유지여부를 분석하였고, 고장패턴과 검사주기 적절성도 확인하였다. 도출결과를 개발기관 및 품질보증기관, 제작사에 환류하여 RCM 분석을 통한 초기 신뢰도 회복 조치 및 총수명주기간 유지보수비가 절감되도록 정비정책에 대한 개선방안을 제시하였다. In this paper, age exploration of ${\bigcirc}{\bigcirc}$ anti-ship missiles which were deployed on RoKN ships were analysed using parametric estimation method. Additionally, Life distribution and failure pattern of ${\bigcirc}{\bigcirc}$ anti-ship missile were analysed by using field data such as collected inspection, fail, maintenance record for 6 years. Storage failure and MTBF of missile and components were analysed by using reliability analysis s/w Weibull++ v7. The results were compared with maintenance policy including periodic inspection and MTBF which were analysed during development phase. Finally, the suggested methodology using field data analysis of oo anti-ship missile will be applied on re-estabilishment of maintenance policy of ${\bigcirc}{\bigcirc}$ anti-ship missile for TLCSM(Total Life Cost System Management) effectively.
디지털변전소 통합 IED 용 Process Bus 네트워크 통신지연 시뮬레이션 연구
김석곤(Seok-Kon Kim),안용호(Yong-Ho An),장병태(Byung-Tae Jang),최종기(Jong-Kee Choi),이남호(Nam-Ho Lee),한정열(Jung-Yeol Han),이유진(You-Jin Lee) 한국조명·전기설비학회 2015 조명·전기설비학회논문지 Vol.29 No.8
Digitalization of the substation in Korea has been in progress so far with focusing on Station Bus. However, its application to Process Bus has been delayed due to some technical issues. IEDs based on Process Bus use the data values of SV and GOOSE. As the size of communication data on Process Bus is comparatively bigger than that of Station Bus, it is very important for the evaluating the performance of Process Bus to analyze the transferring speed and quality of data from the first equipment, which is located on process level, to station level. According to the results of related studies, it is said that the most important factor for the design and operation of Process Bus network is the communication delay with consideration of the volume of packets. In the paper, the results of performance test for the network with and without application of VLAN on Process Bus system that uses integrated IEDs are presented. Additionally, the paper proposes the optimal method to analyze the communication delays of network systems through evaluating the maximum delay time, link process ratio and the amount of lost packets by using a simulation tool.
대함유도탄의 TLCSM을 위한 RCM 적용에 관한 연구
김석곤(Seok-kon Kim),김용진(Yong-jin Kim),왕영진(Young-jin Wang),김성욱(Sung-out Kim),이인현(In-hyun Lee),이기서(Key-seo Lee) 제어로봇시스템학회 2011 제어로봇시스템학회 합동학술대회 논문집 Vol.1 No.1
In this paper, age exploration of oo anti-ship missiles deployed on RoKN ship were analyzed using RCM process for TLCSM. Additionally, Life distribution and failure pattern of oo anti-ship missile were analyzed by using field operation data such as collected inspection, fail, maintenance records for 6 years. Storage failure and MTBF of missile and components were analyzed using reliability analysis s/w weibull ++7. The results were compared with maintenance policy including periodic inspection and MTBF analyzed during development phase. Finally, the suggested methodology using RCM for TLCSM of anti-ship missile will be applied for saving missile TOC(Total Ownership Cost) effectively.
디지털변전소 Process Bus 네트워크시스템 토폴로지 설계 및 구현 방안
김석곤(Seok-kon Kim),김우중(Woo-Joong Kim),이남호(Nam-Ho Lee),박유영(Yu-Yeong Park),김남대(Nam-Dae Kim),장병태(Byung-Tae Jang),윤석열(Seok-Yeul Yun) 대한전기학회 2021 대한전기학회 학술대회 논문집 Vol.2021 No.7
Process bus를 적용한 디지털변전소의 보호제어자동화시스템은 각 보호제어장치 간 디지털 신호교환을 담당하는 네트워크의 구조가 중요하다. 네트워크 구성방식(토폴로지)을 효과적으로 구현하기 위해서는 IED, MU, 시각 동기화 장치, 네트워크 중계장치 등의 다양한 기기들이 연계 접속되는데, 이들 기기는 표준형 1개 변전소 기준 120개 이상의 기기가 접속된다. 이러한 기기들의 연결구조에 대한 설계방식은 변전소의 신뢰도와 경제성 등을 결정짓는 중요한 요소로 작용한다. 토폴로지 구현 방식은 크게PRP 및 HSR 방식 등 두가지로 구성되는데, 일반적으로 혼합방식 전반적인 적용추세로 나타나고 있다. 본 연구에서는 네트워크의 구성기기와 토폴로지 설계시의 기본개념설계를 분석하고 최적의 네트워크 토폴로지 구현 실증을 위한초기 단계의 토폴로지 구성을 위한 Process bus 토폴로지의 고유특성을 고려한 설계방안을 모색하고 이에 따른 기본 네트워크시스템의 구현내역을 소개하였다.