http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
포스터 전시회 : 서보 유압형 피에조 인젝터 모델 개발 및 2단 분사 검증
김상명 ( Sang Myeong Kim ),정명철 ( Myoung Chul Jeong ),성기수 ( Gi Su Sung ),조인수 ( In Su Jo ),이진욱 ( Jin Wook Lee ) 한국액체미립화학회 2013 한국액체미립화학회 학술강연회 논문집 Vol.2013 No.-
Performance of diesel engine with high fuel pressure injection is related its emission gas and fuel consumption. In this study, by using 3rd generation piezo-driven injector model, two-stage injection characteristics and effects were analyzed. And numerical model with injection rate and hydraulic pressure about two-stage injection were developed and verified with experimental results.
김상명(Kim Sang Myoung),박주원(Park Ju Won),이훈하(Lee Hoon Ha),김기호(Kim Ki Ho) 대한토목학회 2008 대한토목학회논문집 A Vol.28 No.3A
Hydration reaction of Free-CaO is thought to be the main reason of expansion failure of slag. A lot of research institutions are conducting studies on solutions to this problem, and moreover it has been carried out how to make use of aggregates for concrete. While studies covering wide rage of blast furnace slag have been accomplished in the country, studies on steelmaking slag are insufficient. Therefore, this study aimed at analyzing basic physical properties of electric arc furnace oxidizing slag, which is the main material, and furthermore it focused on how to make use of aggregates for concrete examining chemical mechanism, which can be put to practical use. To address this issue, components of electric arc furnace oxidizing slag were analyzed with measurement of physical properties, followed by long-term strength and detailed durability analysis, which can evaluate the appropriateness of application of cement concrete. Besides the environmental conservation and recycling which can be obtained by application of industry byproducts, commercializing of electric arc furnace oxidizing slag as fine aggregates for cement concrete are expected. 슬래그의 팽창성 붕괴는 주로 Free-CaO의 수화 반응이 주된 원인으로 분석되고 있으며, 이 문제의 해결 방안을 마련하기 위해 여러 기관에서 연구가 진행되고 있고, 더불어 콘크리트용 골재로의 활용 방안을 지속적으로 연구하고 있다. 현재, 국내에서는 고로 슬래그에 대한 연구는 많이 이루어지고 있지만, 전기로 및 전로 슬래그와 같은 제강 슬래그에 대한 연구는 극히 미비한 실정이다. 이에, 본 연구의 주재료인 전기로 산화 슬래그의 기초적인 물성 분석뿐만 아니라, 화학적인 메커니즘을 규명하여 콘크리트용 잔골재로서의 활용 가능성을 분석하고, 실생활에 응용하는데 그 목적이 있다고 하겠다. 그렇기 때문에, 본 연구의 진행 방향으로 전기로 산화 슬래그의 성분 분석과 함께 기본 물성을 측정하고, 이후에 중/장기 강도 및 세부적인 내구성 분석을 실시하여, 시멘트 콘크리트 적용의 적합성 평가 후, 규격을 제안하는 절차를 밟았다. 본 연구에 대한 기대 효과는 산업 부산물의 활용에 따른 환경 보전 및 재활용이라는 측면 이외에도, 전기로 산화 슬래그의 시멘트 콘크리트용 잔골재서의 상용화에 있다고 하겠다.
소성 점토의 침탄에 따른 동결융해 저항성 및 적외선 방사특성 연구
김기호,김상명,강병철,Kim, Ki-Ho,Kim, Sang-Myoung,Kang, Byung-Chul 한국세라믹학회 2008 한국세라믹학회지 Vol.45 No.7
The Physical property changes of calcined clay by carburization were investigated studied. The carburization mechanism is the penetration of carbon which occurred during incomplete fuel combustion into crevice of clay structure. The experiments for elasticity and freeze-thaw resistance were conducted, and the results can be summarized as follows: Dynamic modulus of elasticity and also freeze-thaw resistance of calcined clay by carburization treatment increased more than 92% after testing 300 cycle, which was more improved than 88% of calcined clay. Therefore, it can decrease the possibility of winter-sowing, which is one the weakness of calcined clay. It is on the basis of the fact that the porosity of calcined clay by carburization treatment is about 12%, which indicates smaller pore spaces comparing with the 14% of porosity of calcined clay and those values were calculated by apparent porosity show and also supported by SEM images. Infrared emissivity of calcined clay by carburization treatment and calcined clay were respectively 0.92 and 0.9l at $80^{\circ}C$. However, those values were 0.91 and 0.88 at $200^{\circ}C$, which means infrared emissivity of calcined clay by carburization treatment shows 3.6% higher than the calcined clay. Moreover, within the wavelength range from 3 to $7\;{\mu}m$, while the calcined clay had low infrared emissivity, the calcined clay by carburization treatment had increased infrared emissivity. It is inferred that it was affected by carbon element that has high infrared absorptivity within this wavelength range.
반사법에 의한 재료표면의 적외선 방사율 측정에 관한 연구
강병철(Byung-Chul Kang),김상명(Sang-Myoung Kim),최정윤(Joung-Yoon Choi),김군옥(Gun-Ok Kim) 한국비파괴검사학회 2010 한국비파괴검사학회지 Vol.30 No.5
적외선 열화상 카메라를 이용하여 온도를 측정할 때는 측정 대상물질의 적외선 방사율이 중요하다. 적외선 방사율은 흑체와 물체의 적외선 방사 강도비로 구할 수 있으나, 상온에서는 배경의 영향으로 인해 측정하는 것은 용이하지 않다. 따라서 FT-IR를 이용하여 반사법에 의해 강판 및 강판에 코팅된 도료의 적외선 반사율을 측정하고 적외선 방사용을 구하였다. 연마된 강판은 0.06 ~ 0.10의 적외선 방사율을 나타내고 있으며, 비연마 강판은 표면조도에 의해 광학적 특성의 변화로 인한 적외선 방사율 측정에 오차가 발생하였다. 강판에 코팅된 투명도료는 적외선 흡수로 인해 방사율은 0.50 ~ 0.84 정도로 높아졌으며, 도료의 적외선 흡수 밴드에 의해 파장에 따라 방사율도 변한다. 이 실험을 통해 재료표변의 재질, 두께, 조도 등 표면 상태에 따라 적외선의 광학적 특성이 변하는 것을 확인할 수 있었다. 또한 반사법은 금속 및 금속에 코팅된 도료의 적외선 방사율 측정에 유용한 것으로 판단되며, 측정된 적외선 방사율을 적외선 열화상에 제공함으로서 측정온도의 오차를 줄일 수 있다. Infrared emissivity is one of the most important factors for the temperature measurement by infrared thermography. Although the infrared emissivity of an object can be measured from the ratio of blackbody and the object, at room temperature it is practically difficult to measure the value due to the background effects. Hence, quantitative reflectance of bare steel plate and the surface of coating was measured by FT-IR spectroscopy and emissivity was calculated from this. The emissivity of polished bare steel surface was from 0.06 to 0.10 and the value for the unpolished bare steel can not be achieved because optical characteristics changes of surface roughness induces erroneous results. Emissivity of transparent paint coated steel was from 0.50 to 0.84. Depends on the IR absorption regions, which is a characteristic value of the coating, emissivity changes. This study suggests surface condition of material, thickness, roughness et cetra are important factor for IR optical characteristics. Emissivity measurement by reflection method is useful technique to be applied for metal and it with coating applied on the surface. The range of experimental errors of temperature can be narrowed by the application of infrared thermography from the measured thermal emissivity.
민정기,김태상,조병영,김상명,민병준,Min. Jeong-Ki,Kim. Taesang,Cho. Byung-Young,Kim. Sang-Myoung,Min. Beong-Jun 한국방재학회 2014 한국방재학회 학술발표대회논문집 Vol.2014 No.1
본 연구에서는 국내외에서 제작되어 사용되고 있는 면진장치의 시험규격에 대한 국내외 동향을 살펴보았으며, 국제규격에서 요구하는 수준에 부합하는 면진장치 시험평가시스템을 개발하였다. 면진장치의 경우 건축, 토목구조물, 정보통신시설 및 원자력시설에 적용되어 지진재해 발생시 요구되는 성능을 정확히 만족하는지에 대한 확인이 필요하며, 현재까지는 면진장치 제작업체의 자체 품질검사를 위해 구축한 시험기에서 직접 이루어지는 입회시험으로 제품성능을 평가해 왔다. 그러나 면진장치의 국내 판매 뿐 아니라 국내 제품의 해외 판매 시 국제적으로 공인될 수 있는 시험기관에서 성능을 평가한 객관적이고 신뢰성 있는 인증서의 요구가 증가하고 있는 실정이다. 이에 따라 ISO 22762 등 국제규격에서 요구하고 있는 면진장치의 성능에 대해 살펴보고, 그에 따른 국내 면진장치 시험평가 시스템의 장단점을 파악하였으며, 이를 통해 기존 면진장치 시험평가에 최적화된 새로운 면진장치 평가시스템을 개발하였다. 이 연구에서는 면진장치 시험평가시스템의 개발에서부터 면진장치 시험평가시스템의 성능을 파악하기 위한 성능실험 등 장비 개발에 대한 전반적인 과정에 대해 설명한다. 또한 새로 개발된 면진장치 시험평가시스템 장비를 활용한다면, 국내 기업의 해외진출 시 유용하게 사용될 수 있을 것으로 기대된다.