http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
골재 내 점토 혼입으로 인한 문제점을 해결하기 위한 건설용 첨가제 개발
김부현(Kim, Bu Hyeon),박혜석(Park, Hye Seok),오승택(Oh, Seung Teak),김소영(Kim, So Young),윤석주(Yoon, Seok Ju),김병조(Kim, Byung Jo) 한국콘크리트학회 2021 한국콘크리트학회 학술대회 논문집 Vol.33 No.2
이 연구는 골재 내 점토를 첨가하여 유동화제와 결합재, 점토 간의 상관관계 예측을 통한 몰탈테스트의 결과를 도출한다. 점토의 종류 중 카오린, 벤토나이트 등 몇 가지가 존재하나, 몬모릴로나이트라는 물질은 유동화제와 강한 상호작용을 통해 흡착이 되며, 논문으로 알려진 바로는 시멘트의 100배로 알려져 있다. 또한 체적 대비 13~16배까지 팽윤하여 다량의 혼합수가 필요하며 제조 시 콘크리트 표면 갈라짐, 수축 작용을 통한 양질의 콘크리트 제조를 어렵게 한다. 몬모릴로나이트(MMT)가 혼합된 몰탈에 유동화제 대비 흡착성능을 높인 물질을 투입하여 적절한 성능을 발현하는 조건을 확인하였다. 점토가 혼입된 골재를 사용 시 당사 제품 AKCON<SUP>TM</SUP> CA-150C를 사용하면 미투입 시 대비 유동성이 효과적으로 측정한 것을 확인할 수 있다. In this paper adding clay in aggregate, we derive the results of the mortar test through predicting of correlation between superplasticizer, binder, clay. There are several types of clay such as kaolin and bentonite, montmorillonite interacts strongly with superplasticizer to adsorb them, It is known from the papers that 100 times that of cement. In addition, a large amount of mixed water is required because it swells up to 13 to 16 times its volume. It makes difficult to manufacture high-quality concrete due to cracking and shrinkage on the concrete surface. Conditions for expressing appropriate performance were confirmed by adding a material with higher adsorption performance than the superplasticizer In mortar mixed with MMT
콘크리트 조기강도 개선을 위한 나노 입자 유-무기 성분의 첨가제 개발
김소영(Kim, So Young),박혜석(Park, Hye Seok),오승택(Oh, Seung Teak),김부현(Kim, Bu Hyeon),윤석주(Yoon, Seok Ju),김병조(Kim, Byung Jo) 한국콘크리트학회 2021 한국콘크리트학회 학술대회 논문집 Vol.33 No.2
본 연구에서는 무기 성분 및 Polycarboxylate Ether(PCE)를 포함하는 나노 크기의 규산 칼슘 수화물을 제조하는 방법에 관한 것으로, 조기강도에 대한 효과를 연구하였다. 빗살형의 PCE 존재 하에 칼슘성분의 수용액과 이산화규소 성분의 수용액을 반응하여 나노 크기의 Calcium Silicate Hydrate (C-S-H)를 얻을 수 있었다. 이러한 방법으로 제조한 C-S-H는 나노 크기의 균일한 입자로 제어하여 수화 속도를 가속화하면서 조기강도를 증가시킬 수 있었다. 또한 기계적인 후 작업 없이도 침전물이 없이 분산이 되어있는 용액을 얻을 수 있었다. This study relates to a method for producing nano-sized calcium silicate hydrates containing inorganic components and polycarboxylate ether(PCE), and the effect on early strength was studied. Calcium Silicate Hydrate (C-S-H) of nano size was obtained by reacting an aqueous solution of calcium component and an aqueous solution of silicon dioxide component in the presence of comb-shaped PCE. The C-S-H prepared by this method could increase the early strength while accelerating the hydration rate by controlling nano-sized uniform particles. In addition, residual solids could be minimized without mechanical post-work.
임진우,이광희,김부현,이철희,Lim, Jinwoo,Lee, Kwang-Hee,Kim, John,Lee, Chul-Hee 한국자동차안전학회 2017 자동차안전학회지 Vol.9 No.4
Dynamo based vehicle inspection device is end of line device for automobile industry. The device is utilized as implementing vehicle functionality inspection such as brake force, cruise control, kick-down acceleration, CAN inspection. As dynamo based inspection device is broadly adopted in automobile industry, the dynamic study is required to verify the vehicle test equipment reliability. This research recommends appropriate dynamic brake force inspection procedure and theoretical background for developed equipment. Dynamic characteristic of brake force implementation to roller is simplified. With simplified characteristics, the indirect brake force measurement strategy is developed and adopted. Comparison of each brake force result, the appropriate brake force inspection criterion is given.
이공계분야 국가연구개발사업 수행대학 연구인력의 역량모델 및 교육훈련로드맵 개발
유덕현 ( Duk Hyun Yoo ),유기원 ( Ki Won Yoo ),김민희 ( Min Hee Kim ),신준석 ( Joon Seok Shin ),김부현 ( Boo Hyun Kim ),윤세훈 ( Sei Hoon Yun ) 한국인력개발학회 2013 HRD연구 Vol.15 No.3
본 연구는 이공계분야 국가연구개발사업 수행대학 연구인력의 전문성향상을 위한 역량을 도출하고 이를 바탕으로 역량모델과 교육훈련로드맵을 개발하는 것이 목적이다. 본 연구의 대상은 이공계 분야에서 국가연구개발사업을 수행하고 있는 대학의 연구인력으로, 연구대상은 석박사 연구인력이다. 본 연구의 목적을 달성하기 위해 직무전문가와 국가연구개발사업 전문가 8명에 대한 인터뷰를 실시하였으며, 국가연구개발 수주비 상위 5개 대학에 재학 중인 연구인력 14명을 대상으로 총 2회에 워크숍을 실시하였다. 또한 연구결과가 도출되는 시점에서 국가연구개발사업 전문가 4명에게 2회에 걸쳐 자문을 받았다. 한편 본 연구에서 진행된 연구결과는 크게 5가지로 요약될 수 있다. 첫째, 국가연구개발사업에 대한 직무분석을 수행하였다. 둘째 이공계분야의 역량을 도출하였다. 셋째 도출된 결과를 바탕으로 역량모델을 개발하였다. 넷째, 교육훈련과정을 도출하고 과정의 내용을 설계하였다. 다섯째, 교육훈련과정의 특징, 난이도, 계속성과 계열성을 고려하여 교육 훈련로드맵을 도출하였다. 본 연구를 통해 개발된 이공계분야 국가연구개발사업 수행대학 연구인력의 역량모델 및 교육훈련로드맵은 향후 이들의 역량진단과 평가, 교육요구분석 및 교육훈련을 위한 기초를 제공해 줄 수 있을 것이다. The purpose of the study is to identify what core competencies are necessary for the researchers to conduct national R&D projects, and develop a competency model and training roadmap in Sciences and Engineering fields. The subjects of this study were the students studying for a master or doctoral degree in Sciences and Engineering fields. All of them have some experiences of national R&D projects with their academic advisors. Interviews and workshops were conducted with the selected subjects and professors who also had conducted national R&D projects. Then two workshops were conducted with 14 subjects studying at top five universities in terms of winning research funds from national R&D program. The Professors with experiences of national R&D projects reviewed our data analysis process and results. On the basis of the results of this study, five outcomes are as in the following - job analysis on national R&D project, competencies identification by sciences and engineering fields, competency model development, training courses and modules design and establishment of training roadmap. The results could not only provide a foundation for diagnosing and assessing researchers` competency, but also become basic standards for training needs analysis and training itself.