http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
IEC/IEEE 60780-323 국제표준의 개정 배경, 주요 내용 및 적용성 평가
김복렬(Bok-Ryul Kim),주운표(Oon-Pyo Zhu),고정수(Jung-Soo Koh) 표준인증안전학회 2016 표준인증안전학회지 Vol.6 No.3
2003년 몬트리올 IEC 총회에서 IEC와 IEEE 두 표준기관이 협력하여 동일 주제의 표준에 대해서는 이중 로고 사용을 합의하였다. 그 일환으로 기기검증 관련 표준인 IEC60780과 IEEE323을 단일 표준으로 제정하고 이중 로고를 사용하는 협력사업을 착수하였으며, 2016년 2월에 “원자력시설-안전성에 중요한 전기기기-검증”이라는 제목으로 최종 발간되었다. 이 표준은 원자력시설에 사용되는 안전성에 중요한 전기기기 및 관련 연계설비의 검증에 관한 기본요건, 즉 검증원칙, 검증 방법 및 절차 등을 규정하고 있다. 이 논문에서는 IEC 및 IEEE 기관의 협력 및 주요 개정내용과 규제 적용성을 평가한다. In 2003 IEC plenary meeting held in Montreal, both IEC and IEEE organizations agreed the use of dual logo on the standards of same subject. As part of collaboration, they launched the joint projects which establish a single standard harmonizing with IEC60780 and IEEE 323 related to equipment qualification and use dual logo, and finally published “Nuclear Facilities – Electrical Equipment Important to Safety – Qualification” in February 2016. This standard describes the basic requirements, say, principles, methods, and procedures for qualifying electrical equipment important to safety and interfaces that are to be used in nuclear facilities. This paper deals with the revision and major contents of IEC and IEEE joint projects and evaluates their effects on regulatory applicability.
IEC 62765-2 원전 안전관련 온도센서의 경년열화 국제표준 개발
주운표(Oon-Pyo Zhu),김복렬(Bok-Ryul Kim),고정수(Jung-Soo Koh),박성백(Sung-Baek Park) 표준인증안전학회 2016 표준인증안전학회지 Vol.6 No.4
원전 안전관련 온도센서인 측온저항체(RTD) 및 열전대(TC)에 관한 경년열화관리의 IEC 62765-2는 제3수준의 IEC TC/SC 45A 기술문서이다. 이 논문은 원전종사자들에게 동 주제에 대한 직관을 줄 의도로 작성하였다. 이 국제표 준의 목표는 원전 온도센서의 경년열화로 인한 원전에 잠재적인 영향을 확인하고, 이 표준에서 제시하는 최소한 요건을 만족하고 있음을 확증하는 적합한 조치를 수행하여 원전의 안전성을 확보하도록 하였다. 본 논문은 RTD 및 TC의 경년 열화관리 단계 중 온도 교정 허용오차를 포함한 성능검증단계에 초점을 맞추었다. This paper is intended to give an insight operators of NPPs (utilities), systems evaluators, and by licensors. This IEC 62765-2 is the third level IEC SC45A document tackling the specific issue of management of aging of temperature sensors in nuclear power plants for I&C systems important to safety. The standard identifies minimum requirements aimed at ensuring that any potential impacts on NPP safety due to ageing of temperature sensors of NPP can be identified and that suitable actions are undertaken to demonstrate that the safety of the plant will not be impaired and to meet the requirements as described in the standard. This paper focused on the performance verification with the specifed calibration tolerance in the process of ageing management of RTD and thermo-couple.
PSCAD/EMTDC를 이용한 원전 안전등급 인버터 하이브리드 절체스위치 순환전류 분석
김대식(Dae-Sic Kim),김복렬(Bok Ryul Kim),차한주(Hanju Cha) 대한전기학회 2010 대한전기학회 학술대회 논문집 Vol.2010 No.10
절체스위치 중 하나인 하이브리드 절체스위치는 반도체식 절체스위치에 비해 사이리스터 용량을 감소시킬 수 있고, 정상운전 중 사이리스터는 비통전상태이므로 발열에 의한 냉각을 고려하지 않아도 되는 장점을 가지고 있다. 하지만 주전원(인버터)과 대체전원(조절 용변압기) 간 병렬운전되는 구간에 의해 필연적으로 순환전류가 흐르는 단점을 가지고 있다. 본 논문에서는 실제 원자력발전소에 발생한 순환전류 발생시례를 PSCAD/EMTDC를 이용하여 이를 시뮬레이션하고 분석한다.
장홍석(Hong-Seok Jang),김복렬(Bok-Ryul Kim),주운표(Oon-Pyo Zhu),김건중(Kern-Joong Kim) 대한전기학회 2009 대한전기학회 학술대회 논문집 Vol.2009 No.11
본 논문에서는 부산지역에 신규 건설중인 원자력발전소의 낙뢰보호설비에 대한 효율 및 확률을 한전 낙뢰 감지네트워크(KLDNet)에서 관측한 연도별 낙뢰 발생횟수 통계자료를 바탕으로 분석하였다. 분석결과 다년간의 정량적 누적통계자료를 활용하면 편차발생이 적은 연간뇌우일수를 얻을 수 있으며, 구조물에 대한 낙뢰 보호시스템을 설계할 때 요구효율계산을 수행하면 구조물에 대한 낙뢰보호설비가 과설계 또는 부족설계되는 현상을 방지할 수 있다. 또한 구조물에 뇌격되는 뇌격전류의 크기분포별 확률을 고려하여 피뢰설비를 설계하면 피뢰설비가 포착할 수 있는 뇌격전류범위를 예상할 수 있어 낙뢰보호 실패율을 최소화할 수 있는 최적의 피뢰설비 설치가 가능하다.
원전 전력계통 운전모드에 따른 안전모선 전압 Sag 영향분석
김문영(Moon-young Kim),김복렬(Bok-ryul Kim),정충희(Choong-heui Jeong) 대한전기학회 2012 대한전기학회 학술대회 논문집 Vol.2012 No.5
When electrical transients take place in onsite power system of nuclear power plants, the voltage of safety bus can be affected, as a form of voltage sag, by the transients. If voltage sag of the safety bus occurs and impact on the safety features is existed, the risk of nuclear power plants is increased. Therefore, it is necessary to analyze the effect on voltage sag of safety bus due to electrical transients as operating modes of power systems in nuclear power plants. This study performed that the phenomenon of voltage sag on the safety bus due to various transients as electrical operating modes is simulated and analyzed.
원전 전기적 과도현상에 따른 전압 sag와 전동기 운전특성 영향
김문영(Moon Young Kim),김복렬(Bok Ryul Kim),구철수(Charles Goo),조영식(Young Sik Cho),김인용(In Yong Kim) 대한전기학회 2010 대한전기학회 학술대회 논문집 Vol.2010 No.11
When electric faults take place in onsite power system of nuclear power plants, the voltage of safety related bus can be affected, as a form of voltage sag, by electrical transients. The safety related buses in nuclear power plants have a role of power supplying to essential loads for safety shutdown of reactor. If voltage sag of the safety related bus would be occurred and impact on the operating characteristics of motor would be existed, the risk of nuclear power plants will be increased. Therefore, it is important to analyze the effect on voltage sag of safety related bus and characteristics of motor operating due to electrical transients in nuclear power plants. This study performed that the phenomenon of voltage sag and the effect on motor operation by different fault types is simulated and analyzed.
표준형원전 전기적 과도상태에 따른 소내 모선전압 영향 분석
김문영(Moon-young Kim),김복렬(Bok-ryul Kim),조명식(Young-sik Cho),장홍석(Hong-seok Jang),김인용(In-yong Kim),이재도(Jae-do Lee) 대한전기학회 2007 대한전기학회 학술대회 논문집 Vol.2007 No.11
When onsite power is supplied from grid due to electrical transient in NPP, the effect of the nuclear plant risk will be increased by the change of grid performance. It is important to analyze the effect for bus voltage of onsite according to grid reliability. Therefore, we analytically accomplish the effect for bus voltage by electrical transient in KSNP.