http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
공유화제가 첨가된 미니에멀젼 중합에 의한 폴리(비닐 아세테이트) 라텍스의 제조 및 특성
박수진 ( Park Su Jin ),김기석 ( Kim Gi Seog ),홍성권 ( Hong Seong Gwon ) 한국공업화학회 2004 공업화학 Vol.15 No.3
Poly(vinyl acetate) (PVAc)는 dodecyl methacrylate (DMA), cetyl alcohol (CA), 그리고 hexadecane (HD)과 같은 각기 다른 세가지 공유화제의 첨가에 의한 미니에멀젼 중합법에 의하여 중합하였다. PVAc 미니에멀젼 중합의 반응 시간에 따른 전환율은 중량측정법에 의하여 측정하였고, PVAc 라텍스의 입자 특성은 입도 분석기에 의하여 정의하였다. 실험 결과, PVAc의 중합은 1 h 이내의 빠른 시간 내에 이루어졌고, 균일화에 의한 단량체 입자의 증가에 의하여 일반적인 에멀젼 중합보다 빠른 전환율을 나타내는 것을 확인할 수 있었다. 단량체 입자의 크기는 공유화제와 개시제의 종류 및 균일화 시간과 같은 제조 조건에 의하여 조절할 수 있었고, 제조된 고분자 라텍스의 입자크기는 약 40~500 ㎚로 나타났다. 또한 미니에멀젼에 중합에 의한 고분자 라텍스는 일반적인 에멀젼 중합과 비교하여 우수한 저장 안정성을 나타내었고, 이러한 특성은 공유화제의 첨가에 의해 형성된 삼투압 효과에 의해 입자간의 Oswald ripening 효과 및 유착을 방지하기 때문으로 판단된다. Poly(vinyl acetate) (PVAc) was polymerized by miniemulsion method in the presence of three different cosurfactants, i.e. dodecyl methacrylate (DMA), cetyl alcohol (CA), and hexadecane (HD). Changes in the conversion with time was examined with gravimetry analyzer, while the particle features of polymer latexes were determined with particle size analyzer. The conversion over 90% was achieved within 1 h and the conversion rate in the miniemulsion polymerization was higher than that in the conventional emulsion polymerization. This is attributed to the increased number of droplet during homogenization. The diameters of polymer latexes were adjusted between 40∼500 nm by controlling cosurfactant, initiator, and homogenization time. Shelf stability of miniemulsion exhibited was found to be superior compared with that of conventional polymerization. These results probably stem from the prevention of Ostwaid ripening and the coalescence among the particles by the osmotic effect formed with the addition of cosurfactant.
토코페롤을 함유한 Poly(ε-caprolactone) 마이크로캡슐의 방출거동
박수진 ( Park Su Jin ),김기석 ( Kim Gi Seog ),홍성권 ( Hong Seong Gwon ) 한국공업화학회 2003 공업화학 Vol.14 No.8
본 연구에서는 대기중에서 토코페롤의 보존 안정성을 향상시키기 위하여 벽재 물질로서 poly(ε-caprolactone) (PCL)을 이용하여 캡슐화 하였다. 토코페롤을 함유하는 PCL 마이크로캡슐은 액중건조법에 의하여 제조하였고 마이크로캡슐의 특성을 알아보기 위하여, 교반속도, 유화제의 농도, 그리고 토코페롤의 농도를 변화시켜 제조하였다. PCL 마이크로캡슐에 대한 심물질의 함입은 FT-IR에 의하여 확인하였고, 마이크로캡슐의 크기와 형태는 image analyzer와 SEM을 이용하여 관찰하였다. 또한, 마이크로캡슐에서 토코페롤의 방출특성은 UV/vis spectra에 의하여 측정하였다. 실험결과, 마이크로캡슐의 입자 크기는 교반속도와 유화제의 함량이 증가함에 따라 작아지는 것을 알 수 있었다. 또한 마이크로캡슐의 용융 엔탈피(ΔHm)는 심물질의 감소와 함께 증가하였고, 방출 속도는 감소하는 것을 확인할 수 있었다. 이는 심물질의 함량 감소와 함께 심물질의 표면에 대한 PCL의 흡착량의 증가에 의한 것으로 판단된다. In this work, tocopherol was encapsulated for improved retention stability with biodegradable poly(ε caprolactone)(PCL) as wall materials. PCL microcapsules containing tocopherol were prepared by oil-in water (O/W) emulsion solvent evaporation method. To cetemine the characteristics, the microcapsules were prepared in different stirring rates, concentrations of the surfactant, and weight ratios of tocopherol. The PCL microcapsules were confirmed by FT-IR and the effects of manufacturing factors on the diameter and the form of microcapsules were observed by image analyzer and scanning electron microscope. And the release behavior of microcapsule was characterized by UV/vis. spectorphotometer. As a result, the average particle size of microcapsules decreased with the increase of the stirring rate and surfacant ratio. The melting enthalpy(△Hm) of microcapsules was increased and the release rate decreased with the decrease of core concentration. These results are probably due to the increased adsorption quantity of the PCI, on core surfaces