http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
자동변속기용 유압제어 솔레노이드 밸브의 노치 형상에 관한 유압특성해석
권영석(Youngseok Kwon),이승범(Seungbeom Lee),노의동(Euidong Ro),이창훈(ChangHoon Lee) 한국자동차공학회 2011 한국자동차공학회 학술대회 및 전시회 Vol.2011 No.11
Three-dimensional numerical simulations were carried out to investigate the flow dynamic behavior and pressure characteristics of a variable force solenoid (VFS) valve used in automatic transmissions. To visualize the dynamic movement of the spool, a moving mesh with dynamic layering meshes for varying boundary conditions was employed. The reliability of the employed analysis was demonstrated by the comparison numerical results. The modeling of the VFS valve and the notch shape of the delay parts of the spool was taken into account in analysis. The results of the other Models, the pressure sensitivity curves were found to be precisely controlled by the relation the area of the notch in the range of the characteristic length of the valve.
윤우섭(WooSup Yoon),권영석(YoungSeok Kwon) 한국정치사회연구소 2023 한국과 국제사회 Vol.7 No.1
이 연구는 국가 위기관리체계 중 통합방위사태와 경계태세의 발령기준을 개선하기 위해 분석하였다. 우리 정부와 군은 평시 북한의 침투 및 도발과 같은 상황에 대응하기 위해 경계태세 및 통합방위사태와 같은 국가 위기관리체계를 지속 발전시켜 왔다. 그러나 북한의 도발 상황을 고려하여 통합방위사태와 경계태세가 시기적절하게 선포 및 발령되어야 함에도 불구하고 그렇지 못한 사례가 여럿 있다. 따라서 통합방위사태 선포절차와 경계태세의 발령조건을 반드시 개선할 필요성이 있다. 이를 위해 기존 선행연구 사례를 통해 공통적인 연구의 경향들을 분석하였고, 위와 같은 문제가 발생하는 원인을 관련 법령 분석을 통해 연구문제를 도출하였다. 또 과거 위기대응사례를 분석하여 연구문제에 대한 결론을 내림과 동시에 발전 방향을 제시하였다. 이를 통해 본 논제가 주는 함의는 첫째, 북한의 태도가 급변하여 예측할 수 없는 군사적 도발을 하더라도 유연하게 대응하고 신속하게 대처할 수 있는 위기관리태세를 갖추어야 한다는 것이며 둘째, 이러한 적시적인 위기관리를 통해 정부는 우리 국민들의 안전을 수호하는 역할을 수행해야 한다는 점을 시사하고 있다. This study was analyzed to declaration procedure of the integrated defense situation and security conditions among the national crisis management systems. To this end, common research tends were analyzed through previous cases of previous studies. The cases of the problems were derived through analysis of related laws and regulations. In addition, past crisis response cases were analyzed, conclusions were drawn on research issues, and development directions were presented. The implication of this thesis is first, in other words, it should be prepared for an crisis management posture that can respond flexibly and promptly to North Korea unpredictable military provocations. Second, it suggests that the government must play a role in protecting the safety of the people through timely Crisis management system.
이승범(Seungbeom Lee),백석흠(Seokheum Baek),권영석(Youngseok Kwon),노의동(Euidong Ro),이창훈(Changhoon Lee) 한국자동차공학회 2011 한국자동차공학회 학술대회 및 전시회 Vol.2011 No.11
This paper proposes a design optimization approach for core of solenoid actuators by combining optimization techniques with the finite element method (FEM). A solenoid is an important element part which hydraulically controls a transmission system, etc. The demanded feature of the solenoid is that it performs an electromagnetic force output being constant regardless of the stroke and being proportional to coil current. The plunger compresses a spring with a minimum force of 11 N over an 1.7 ㎜ travel. Compromise decision support problems (CDSP) are used to model engineering decisions involving multiple trade-offs. The approach utilizes a orthogonal polynomial model, the compromise decision support problem, which is a multi-objective formulation based on goal programming. The methodology is demonstrated as a CDSP tool for the design of a solenoid valve core.
지열원 멀티 히트펌프의 동절기 난방성능에 관한 실증 연구
최종민(Jong Min Choi),임효재(Hyo-Jae Lim),강신형(Shin-Hyung Kang),최재호(Jae Ho Choi),문제명(Jemyung Moon),권영석(Youngseok Kwon),권형진(HyungJin Kwon),김록희(RockHee Kim) 대한설비공학회 2009 대한설비공학회 학술발표대회논문집 Vol.2009 No.-
This paper describes the multi-heat pumps applied in an ground source heat pump system for an actual building. The performance of a ground source multi-heat pump installed in the field was investigated at heating season. The average COP of the systems with single U-tube and double tube type GLHXs were 4.8 and 5.0, respectively. It is needed to investigate the long term performance of double tube type GLHX, because the reduction of inlet temperature of OD HX for this GLHX was larger than it for U-tube GLHX.
수집형 마늘 수확기 이용 난지형 마늘 수확 포장성능 시험
강나래 ( Narae Kang ),최일수 ( Ilsu Choi ),이예슬 ( Yeseul Kim ),김영근 ( Youngkeun Kim ),최덕규 ( Duckkyu Choi ),최용 ( Yong Choi ),권영석 ( Youngseok Kwon ),김재동 ( Jaedong Kim ),하창섭 ( Changseob Ha ),이종원 ( Jongwon Lee ) 한국농업기계학회 2020 한국농업기계학회 학술발표논문집 Vol.25 No.2
마늘은 기후에 따라 생육 특성의 차이가 뚜렷한 작물로 생육지역의 기후특성에 따라 한지형과 난지형으로 구분되며, 재배양식에 차이가 있어 농기계 개발에 어려움이 있다. 마늘 재배 기계화율은 ’18년 58.6%로 보고되고 있으나, 수확 작업은 36.7%로 기계화가 특히 미흡한 실정으로 트랙터 또는 경운기용 땅속작물 수확기(굴취기)를 이용하여 굴취 후 인력으로 뿌리에 붙은 흙을 털어내며 수집하고 있어 인력 의존도가 높은 실정이다. 이에 본 연구는 마늘굴취와 뿌리흙 제거, 수집을 일관적으로 수행하는 수집형 마늘수확기를 개발하고 난 지형 마늘을 대상으로 포장성능 시험을 수행하였다. 마늘 수확 포장성능 시험은 경상남도 창녕군 소재 농가포장에서 난지형 대서마늘(Allium sativum L.)을 대상으로 선정하였다. 요인별 20 m 시험구간 조성하였으며, 수확 시험 전 마늘 줄기를 지면으로부터 약 3 cm 내외로 절단하였다. 60kW급 트랙터를 이용하여 작업속도 3수준(0.07, 0.09, 0.11 m/s), 이송속도 3수준(70, 85, 95 rpm)을 요인으로 수행하였다. 수집형 마늘수확기의 수확성능 분석을 위해 시험 구간내 미수집된 마늘을 조사하였으며, 수확기 수집부에 수확된 마늘의 손상률, 이물질 혼입률을 분석하였다. 손상률의 경우 찍힘 등의 외부손상과 멍에 의한 내부손상을 조사하였으며, 멍에 의한 내부손상은 마늘을 수확 후 저장기간 동안 멍에 의한 부패 발생을 20일 동안 조사하였다. 이물질 혼입률은 수집부에 수확된 마늘과 흙을 분리하여 무게를 조사, 비교하였다. 수집형 마늘수확기의 요인별 유의성을 검정하기 위하여 분산분석(ANOVA)을 수행하였으며, 5% 유의수준에서 Duncan의 다중비교를 수행하였다. 포장성능 시험 결과 작업속도 0.11 m/s, 이송속도 85 rpm에서 손실률 2.3%, 손상률 2.2%, 이물질 혼입률 1.5%로 가장 양호하였다. 분산분석 결과 신뢰수준 95%에서 손실률과 이물질 혼입률은 작업속도 및 이송속도 간 유의성이 나타나지 않았으나, 손상률은 작업속도 및 이송속도 간 유의성이 나타났다.
지열원 물대공기 멀티 히트펌프의 냉방 운전 특성에 관한 실증 연구
최종민(Jong Min Choi),강신형(Shin-Hyung Kang),최재호(Jae Ho Choi),임효재(Hyo-Jae Lim),문제명(Jemyung Moon),권영석(Youngseok Kwon),권형진(HyungJin Kwon),김록희(RockHee Kim) 대한설비공학회 2009 설비공학 논문집 Vol.21 No.5
The aim of this study is to investigate the cooling performance of ground source multi-heat pump systems with a vertical single U-tube GLHX(U-tube system) and a vertical double tube GLHX(double tube system), which were installed in a school building located in Cheonan. All systems were operated in a part load conditions for all day, and the maximum COP of the single U-tube system and the double tube system were 6.2 and 5.2 at cooling mode, respectively. The double tube GLHX designed by the GLHEPRO, commercial program, was estimated to have the same performance as the Ur tube GLHX, because the inlet temperatures of each outdoor unit heat exchanger for the former was similar to the latter. Howerver, it is needed to prove the long term performance. It is suggested that the new algorithms to control the flow rate of secondary fluid for GLHX according to load variation have to be developed in order to enhance the performance of the system.
지열원 시스템 히트펌프의 냉방 성능 특성에 관한 실증 연구
임효재(Hyo-Jae Lim),강신형(Shin-Hyung Kang),최재호(Jae Ho Choi),최종민(Jong Min Choi),문제명(Jemyung Moon),권영석(Youngseok Kwon),권형진(HyungJin Kwon),김록희(RockHee Kim) 대한설비공학회 2008 대한설비공학회 학술발표대회논문집 Vol.2008 No.2
Recently, small and medium-sized buildings have employed a multi-heat pump. The major benefits of the mulit-heat pump over a conventional system are that it is easier system to maintain along with a diversification of facility use, and high comfortability. The performance of multi-heat pump systems can be enhanced by using geothermal energy instead of air source energy. This paper describes the multi-heat pumps applied in an ground source heat pump system for an actual building. The performance of a ground source multi-heat pump installed in the field was investigated in cooling mode. The maximum COP of the systems with single U-tube and double tube ground loop heat exchangers were 6.6 and 6.0, respectively. It is suggested that the new algorithms to control the flow rate of secondary fluid for ground loop heat exchanger have to be developed in order to enhance the performance of the system.