http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
유체포화 다공매체의 단계적 굴착해석을 위한 유한요소해석방법
구정회,홍순조,김문겸,황학주,Koo, Jeong Hoi,Hong, Soon Jo,Kim, Moon Kyum,Hwang, Hak Joo 대한토목학회 1993 대한토목학회논문집 Vol.13 No.5
유체포화 다공매체에서의 단계적 굴착시 형상변화로 인한 구조거동을 시간종속적 배수이론으로 예측하기 위한 유한요소해석방법을 제시하였다 시간종속적 배수거동을 고려한 유한요소방정식을 유도하기 위하여 Biot의 방정식을 사용하였다. 이론해가 존재하는 재하 하중에 의한 시간종속적 배수거동 문제의 해석과 완전배수거동시 1단계 굴착과 다단계 굴착시의 변형이 동일한가를 확인하므로써 유도된 방법의 타당성을 검증하였다. 1차원 및 2치원 문제에 대하여 시간종속적 배수모형과 완전배수모형에 의한 결과를 비교하여 그 차이를 예시하였다. 또한 단계적 굴착시 굴착속도 및 투수계수의 변화에 따른 영향도 분석하였다. 수치해석 시뮬레이션을 통해, 다공매체지반의 굴착해석시에는 시간종속적 배수거동에 근거한 해석이 보다 신뢰할 수 있음을 고찰하였다. ln this paper, a finite element analysis procedure is proposed for the incremental multi-step excavations in a fluid-saturated porous medium such as saturated soil ground. As the basis of derivation, Biot's equation was used. The proposed procedure was applied to some one- and two-dimensional problems under incremental excavations. Unsaturated cases as well as saturated cases were considered for comparison. Through numerical tests, the effects of permeability and excavation speed on the deformation history was investigated. Results showed that pore pressure built up during incremental excavation has a significant effect on the deformation and stresses of solid skeleton and validated the use of the present procedure for the analysis of multi-step excavations in fluid-saturated media such as in saturated shallow ground.
황학주,김경승,구정회 연세대학교 산업기술연구소 1987 논문집 Vol.19 No.2
Eventhough the material in the cable-stayed bridge behaves in a linear elastic manner, the overall load-displacement relationships will be nonlinear. An algorithm which consists of the nonlinear stiffness relationships for the cable-stayed bridges is developed. The nonlinearity due to the cable sag is modeled using an equivalent modulus of elasticity. The nonlinearity of the bending member is considered modifying the member stiffness matrix by introducing the concept of stability functions, the geometric nonlinearity is considered recompositing the stiffness matrix caused by the geometric changes in the structure at each loading step. The developed algorithm is used to analyze a cable-stayed bridge of the harp type. The bending moment of the girder, deflections of the girder and tension in cables from the nonlinear analysis are compared with those from linear analysis. The comparison show that the results are in similar pattern, but the nonlinear analysis gives larger values than the linear analysis. The difference between the results from the linear and nonlinear analysis increases as the initial cable tension increases for bending moments of the girder. For deflections of the girder, and the tensions in the cable, it decreases as the initial cable tension increases.
이승원,구정회 경복대학 2001 京福論叢 Vol.5 No.-
본 연구에서는 교량구조물의 내진 안전성을 확보하기 위한 내진설계 및 내진 및 면진 교량받침에 대하여 다음과 같이 연구하였다. 먼저 최근에 개정된 내진설계법에 대하여 고찰해보고, 현재 국내외에서 사용되고 있는 내진 및 면진 교량받침에 대한 분석을 통하여, 교량의 내진성 향상을 위하여 설계에 사용되는 국내외의 내진 및 면진 교량받침의 종류 및 기술적특성에 대해 분석평가하였다. 그리고 연속형 도로교량을 모델링하여 면진받침을 사용하여 면진설계된 교량과 일반 교량받침을 사용하여 내진설계 되지않은 일반교량에 대하여 각각 지진하중(EL CENTRO 지진)에 의한 동적수치해석을 수행하여 면진 교량받침의 지진에 대한 저항성 즉 효용성을 분석한 결과, 면진받침을 사용한 교량은 단면력이 전체 교각으로 분산되어 단면력이 감소됨을 알 수 있었다. 따라서 면진설계된 교량의 지진저항성이 효율적임을 알 수 있었다. In this study, recently developed seismic design criterion is analyzed, and the characteristics and applicability of the various special seismic bridge bearings are studied. The dynamic analysis is performed in this study to characterize the hehavior continuous bridge with two different types of bridge bearings(seismically isolated bearings and conventional bearings) under seismic loading condition(EL CENTRO). For the bridges with the seismically isolated bearings, the sectional forces are evenly distributed to entire piers and the total forces are reduced compared with that of the conventional bridges. It means that the bridges with seismically isolated bearing can make a efficient rather than conventional bearings under earthquake loading.