http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
600W급 IPMSM의 고정자 설계 변수 변화에 따른 온도 특성 분석 및 고찰
고덕화(Duk-Hwa Go),김용태(Yong-Tae Kim),김규탁(Gyu-Tak Kim) 대한전기학회 2017 전기학회논문지 Vol.66 No.8
In this paper, the temperature characteristics by change the width of teeth and yoke in the stat or parameters were analyzed. An initial model of fill factor 45 [%] was produced. Through the experiment, the validity of the temperature analysis using the thermal equivalent circuit method was verified. So, initial model was selected as basic model. Also, temperature characteristic analysis was performed for each width change of the stator teeth and yoke, and the effects of the width of stator teeth and yoke on the temperature characteristics were analyzed.
IPMSM의 고정자 형상 변경에 따른 온도 특성 및 영향도 분석
고덕화(Duk-Hwa Go),김용태(Yong-Tae Kim),장기봉(Ki-Bong Jang),김규탁(Gyu-Tak Kim) 대한전기학회 2017 대한전기학회 학술대회 논문집 Vol.2017 No.4
본 논문에서는 열 등가회로망을 이용하여 IPMSM 고정자 형상 변경에 따른 온도 특성을 분석하였으며, 실험을 통한 검증을 수행하였다. 또한 고정자 변수의 온도 영향력에 대한 분석을 수행하였다.
600W급 IPMSM의 형상 변경에 따른 온도 특성 해석 및 분석
고덕화(Duk-Hwa Go),박제헌(Je-Heon Park),박병준(Byung-Jun Park),김규탁(Gyu-Tak Kim) 대한전기학회 2018 대한전기학회 학술대회 논문집 Vol.2018 No.-
본 논문에서는 IPMSM(Interior permanent magnet synchronuos motor)의 효율 및 온도 특성 향상 설계를 수행하였다. 고정자 형상 변경을 통하여 자속 포화도 개선을 수행하였으며, 권선 사양 변경을 통한 동손 저감을 수행하였다. 전동기 특성 해석은 FEA를 이용하였으며, 집중정수법인열 등가회로망법을 적용하여 온도 특성 해석을 수행하였다. 이에 설계된 전동기에 대한 실험을 통한 검증을 수행하였다.
소형 Slot less PMSM의 coil 배치에 따른 최적 설계 및 열 내구성 분석
김용태,고덕화,김규화,백성민,김규탁,Kim, Yong-Tae,Go, Duk-Hwa,Gim, Gyu-Hwa,Baek, Sung-Min,Kim, Gyu-Tak 대한전기학회 2017 전기학회논문지 Vol.66 No.1
In this paper, slot less type high-speed and compact motor was designed. it was selected through change of stator coil distribution for the optimal performance of the motor. In this paper, designed motor was expected to be very vulnerable to heat dissipation in a compact motor. Therefore, to ensure reliability in the design result, winding and permanent magnet damage caused by the losses of motor was analyzed by thermal analysis and demagnetization analysis. Using the result, whether motor burnout was confirmed by motor performance degradation and insulation breakdown.
d,q 축 전압 방정식에서 시변 파라미터를 고려한 토크 리플 산정
김규화(Gyu-Hwa Gim),고덕화(Duk-Hwa Go),조규원(Gyu-Won cho),장기봉(Ki-Bong Jang),김규탁(Gyu-Tak Kim) 대한전기학회 2017 대한전기학회 학술대회 논문집 Vol.2017 No.4
d, q축 전압방정식을 이용한 토크 계산은 수행 시간이 매우 짧고 효과적으로 성능 평가에 적용할 수 있으나, 토크리플의 고려할 수 없다. 본 논문에서는 시간 의존성이 없는 d, q 축 전압방정식에서 특정 파라미터의 리플을 관측하였고, 이를 고찰하였다. 인덕턴스와 쇄교자속의 변화를 관측하였고 이는 전압 또한 가변화 될 것을 예측 및 관측하였다. 따라서, 쇄교자속의 변화는 토크 또한 변화하고 있음을 알 수 있다. d, q 축 수식 계산된 토크와 유한요소 해석의 결과를 비교 분석한다.