http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Effect of DVI Nozzle Location on the Thermal Mixing in the RVDC
강형석(Hyung Seok Kang),조봉현(Bong Hyun Cho),김환열(Hwan Yeol Kim),윤주현(Juhyeon Yoon),배윤영(Yoon Yeong Bae) 한국전산유체공학회 1998 한국전산유체공학회지 Vol.3 No.1
한국형 차세대원자로에서는 비상노심 안전주입수가 저온관을 통하지 않고 원자 로용기에 직접 주입된다. 원자로용기의 가압열충격과 열수력적 관점에서 최적의 노즐위치를 결정하기 위해서 전산유체역학을 활용하였다. 상용 전산유체코드인 CFX를 이용하여 원자로 하향유로를 모사하는 해석대상 격자를 다중블록으로 형성한 다음 유동장을 비압축성 Navier-Stokes 운동량 방정식, 에너지 방정식과 표준 k-ε 난류모형 등으로 모형화하여 3차원 비정상상태 계산을 수행하였다. CFX에서는 경계 밀착좌표계 - 비엿물림격자와 SIMPLE 알고리즘을 사용한다. 본 연구결과 원자로용기의 가압열충격 관점에서 가장 보수적인 사고인 증기관 과단사고시에도 열적혼합이 잘 일어나 가압열충격이 발생할 가능성이 없는 것으로 판단되며 안전주입수 노즐이 저온관 바로 위에 위치할 때 원자로 하향유로 내의 온도 분포가 가장 균일하여 열적 혼합 관점에서는 최적의 위치로 판단된다.
Effect of DVI Nozzle Location on the Thermal Mixing in the RVDC
강형석(Hyung Seok Kang),조봉현(Bong Hyun Cho),김환열(Hwan Yeol Kim),윤주현(Juhyeon Yoon),배윤영(Yoon Yeong Bae) 한국전산유체공학회 1998 한국전산유체공학회지 Vol.3 No.1
한국형 차세대원자로에서는 비상노심 안전주입수가 저온관을 통하지 않고 원자 로용기에 직접 주입된다. 원자로용기의 가압열충격과 열수력적 관점에서 최적의 노즐위치를 결정하기 위해서 전산유체역학을 활용하였다. 상용 전산유체코드인 CFX를 이용하여 원자로 하향유로를 모사하는 해석대상 격자를 다중블록으로 형성한 다음 유동장을 비압축성 Navier-Stokes 운동량 방정식, 에너지 방정식과 표준 k-ε 난류모형 등으로 모형화하여 3차원 비정상상태 계산을 수행하였다. CFX에서는 경계 밀착좌표계 - 비엿물림격자와 SIMPLE 알고리즘을 사용한다. 본 연구결과 원자로용기의 가압열충격 관점에서 가장 보수적인 사고인 증기관 과단사고시에도 열적혼합이 잘 일어나 가압열충격이 발생할 가능성이 없는 것으로 판단되며 안전주입수 노즐이 저온관 바로 위에 위치할 때 원자로 하향유로 내의 온도 분포가 가장 균일하여 열적 혼합 관점에서는 최적의 위치로 판단된다.
객담 전처리 방법에 따른 객담 항산균 도말 및 배양 양성률 비교연구
강형석 ( Hyung Seok Kang ),성낙문 ( Nack Moon Sung ),이선숙 ( Sun Sook Lee ),김도형 ( Do Hyung Kim ),전두수 ( Doo Soo Jeon ),황수희 ( Soo Hee Hwang ),민진홍 ( Jin Hong Min ),김진희 ( Jin Hee Kim ),원영섭 ( Young Sub Won ),박승규 ( 대한결핵 및 호흡기학회 2008 Tuberculosis and Respiratory Diseases Vol.65 No.5
연구배경: NaOH (sodium hydroxide) 기법을 이용한 전처리 객담과 NALC-NaOH (N-acetyl-L-cysteine-sodium hydroxide) 기법을 이용한 객담의 항산균 도말 및 결핵균 배양 양성률 그리고 배지 오염률을 비교하여 실험실 검사과정 중의 일부분을 개선함으로써 검사 결과의 개선이 가능한 지 확인하고자 하였다. 방법: 2007년 6월부터 2008년 6월까지 국립마산병원에서 객담 검사가 시행된 환자를 대상으로 환자에게서 객담배출 요령을 충분히 교육한 후 두개의 객담 검체를 채취하여 통상적인 NaOH 기법과 NALC-NaOH 기법을 각각 적용한 후 도말 및 배양 결과 그리고 배지 오염률을 비교하였다(n=436). 결과: 항산균 도말 검사에서는 NaOH 기법에 비하여 NALC-NaOH 기법이 다소 높은 양성률(33.0% vs. 39.0%)을 보였으나 통계적인 유의성은 없었다(p=0.078). 결핵균 배양 검사에서는 배지 오염률(culture contamination)은 각각 3.2%와 3.0%로 유의한 차이는 보이지 않았다. 배양 양성률은 NALC-NaOH 기법이 통계적으로 유의하게 높은 배양 양성률(39.7% vs. 28.0%, p=0.0003)을 보였으며, 배양 결과를 도말 검사 결과와 연관 지어 분석하였을 때 도말 검사상 음성인 경우 NaOH 기법과 NALC-NaOH 기법은 각각 7.2%와 15.8% (p=0.0017), scanty를 보인 객담의 경우 각각 42.9%와 60.8% (p=0.036)의 배양 양성률을 보여 통계적으로 의미 있는 차이를 보였다. 결론: 도말 검사에서 음성이나 scanty를 보여 상대적으로 결핵균의 수가 적은 객담의 경우 NALC-NaOH를 이용함으로써 배양 양성률을 개선 시킬 수 있었으며 이는 임상적으로 폐결핵의 진단과 치료 경과 관찰에 직접적인 도움을 줄 수 있음을 보여주었다. Background: Sputum decontamination with NALC-NaOH (N-acetyl-L-cysteine-sodium hydroxide) is known to better detect Mycobacterium tuberculosis (M. tb) by culture than that with using NaOH, which is widely used in Korean hospitals. In this report, sputum samples collected from pulmonary tuberculosis (TB) patients were treated with either NaOH or NALC-NaOH, and we compared the results of smear and culture positivity to determine whether the NALC-NaOH treatment method improves culture positivity in the sputum samples, and especially for those sputum samples that are smear negative and scanty. Methods: For each decontamination method, 436 sputum samples from pulmonary TB patients in the National Masan Tuberculosis Hospital were collected for this study. Sputum from a patient was collected two times for the first and second day of sampling time, and these samples were employed for the decontamination process by performing the 4% NaOH and NALC-2% NaOH treatment methods, respectively, for detecting M. tb by an AFB (Acid Fast Bacilli) smear and also by culture in solid Ogawa medium. Results: The NaOH and NALC-NaOH treatment methods did not significantly affect the AFB smear positivity of the sputum samples (33.0% vs 39.0%, respectively, p=0.078). However, the culture positive percents of M. tb in the Ogawa medium treated with NALC-NaOH and NaOH were 39.7% and 28.0%, respectively, which was a significantly different (p=0.0003). This difference in culture was more prominent in the sputum samples that were smear negative (the positive percents with NALC-NaOH and NaOH were 15.8% and 7.2%, respectively, p=0.0017) and scanty (NALC-NaOH and NaOH were 60.8% and 42.9%, respectively, p=0.036), but not for a smear that was 1+ or higher (p>0.05). Conclusion: NALC-NaOH treatment is better than NaOH treatment for the detection of M. tb by culture, but not by smear, and especially when the AFB smear is negative and scanty. (Tuberc Respir Dis 2008;65:379-384)
일체형원자로 증기발생기 카세트 하단에 설치된 오리피스의 최적설계 연구
강형석(Hyung Seok Kang),윤주현(Juhyeon Yoon),김환열(Hwan Yeol Kim),조봉현(Bong Hyun Cho),이두정(Doo Jeong Lee) 한국전산유체공학회 1998 한국전산유체공학회 학술대회논문집 Vol.1998 No.-
A new advanced integral reactor of 330 MWt capacity named SMART(System-integrated Modular Advanced Reactor) is currently under development at KAERl(Korea Atomic Energy Research Institute). One of the major design features of the integral reactor is locating the steam generators(SG) inside reactor vessel and eliminating the possibility of LB LOCA(large Break Loss of Coolant Accident). Orifices are fitted at the low part of steam generator cassette to stabilize and balance coolant flow distribution in the MCP (Main Circulation Pump) pressure header. A sensitivity analysis is conducted to determine the optimum orifice size using computer code "CFX".
증기제트 방출시 과냉각수조 내의 열혼합 현상 CFD 해석
강형석(Hyung Seok Kang),송철화(Chul Hwa Song) 한국유체기계학회 2006 유체기계 연구개발 발표회 논문집 Vol.- No.-
A CFD analysis for a thermal mixing experiment during steam jet discharge was performed to develop the analysis methodology for the thermal mixing between steam and subcooled water and to find the optimized numerical method. In the CFD analysis, the steam condensation phenomena by a direct contact was modelled by the so-called condensation region model. The comparison of the CFD results with the test data showed a good agreement as a whole, but a small temperature difference was locally found at some locations. However, the commercial CFD code of CFX4.4 together with the condensation region model can simulate the thermal mixing behaviour reasonably well when a sufficient number of mesh distribution and a proper numerical method are adopted.
증기제트 응축으로 유발된 난류제트의 유동특성 예측 상관식 개발
강형석(Hyung Seok Kang),김연식(Y. S. Kim),윤영중(Y. J. Youn),송철화(C. H. Song) 대한기계학회 2008 대한기계학회 춘추학술대회 Vol.2008 No.5
An experimental research was performed to develop an empirical correlation of the turbulent water jet induced by the steam jet through a single hole in a subcooled water pool. A moveable pitot tube including a thermal couple was used to measure a local velocity and temperature of the turbulent water jet. The experimental results show that the velocity and the temperature distributions agree well with the theory of axially symmetric turbulent jet. The correlation predicting the maximum velocity of the turbulent jet was modified from the previous correlation and a new correlation to predict the characteristic length was developed based on the test results.
적응 슬라이딩 관측기를 이용한 매입형 영구자석 동기전동기의 센서리스 속도제어
姜炯錫(Hyung-Seok Kang),金元錫(Won-Seok Kim),金榮石(Young-Seok Kim) 대한전기학회 2006 전기학회논문지 B Vol.55 No.5
In this paper, a new speed sensorless control based on an adaptive sliding mode observer is proposed for the interior permanent magnet synchronous motor(IPMSM) drives. With using voltage equation only, the adaptive sliding mode observer was investigated. Since the parameter of the dynamic equation such as machine inertia or viscosity friction coefficient are not well known and these values can be easily changed during normal operation, there are many restrictions in the actual implementation. The proposed adaptive sliding mode observer applied to overcome the problem caused by using the dynamic equation. Furthermore, the Lyapunov function is used to prove the system stability included speed estimate and speed control. The effectiveness of the proposed algorithm is confirmed by the experiments.