http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
농산물 브랜드이미지가 브랜드신뢰 및 충성도에 미치는 영향 : 천안 '하늘그린'을 중심으로
강성필,양성범,김호,Kang, Seong-Pil,Yang, Sung-Bum,Kim, Ho 한국유기농업학회 2014 韓國有機農業學會誌 Vol.22 No.4
This study analyzed how the brand image elements influenced upon forming the brand trust and the brand loyalty of the 'Sky Green' the joint agricultural product brand Cheonan, Chungnam. The brand image was classified into functional image, symbolical image and origin - associated image. And what element of the brand image element influences upon forming the brand image loyalty by the consumers who are using 'Sky Green'. In the analysis results, the functional image, symbolical image and the image associated with the origin have influenced on forming the brand trust and the brand loyalty. All variables composing the brand image have positive influences on both brand trust and brand loyalty. It means that brand image influences on brand loyalty directly but the greater influence can be exerted through the effects of the parameter of brand trust.
실리카겔 공극에서의 이산화탄소 및 메탄 하이드레이트 생성속도
강성필(Kang, Seong-Pil),이재구(Lee, Jae-Goo) 한국신재생에너지학회 2007 한국신재생에너지학회 학술대회논문집 Vol.2007 No.11
물을 함유한 공극 크기 6, 30, 100 nm의 실리카겔에 이산화탄소 및 메탄을 반응시켜 온도0{sim}4 ?C, 압력 15{sim}40 bar 의 범위에서 가스 하이드레이트 생성속도를 측정하였다. 공극 크기가 작아짐에 따라 특정 온도에서의 평형압력이 높아지는 열역학적 특성을 감안하여 통일한 압력차 (평형압력과 실험압력의 차)를 얻을 수 있도록 조건을 설정하였다. 이산화탄소의 경우 통일 온도에서 하이드레이트 생성속도는 일반적으로 압력이 높아짐에 따라 가속되는 것을 알 수 있었다. 단위 물 당 포집되는 이산화탄소의 양은 최대 1.0을 넘지 못하였다. 또한 하이드레이트 생성을 위해 필요한 유도시간 (induction time)이 2내지 8시간 수준으로 매우 길었다. 공업적인 하이드레이트 이용을 위해서는 빠른 생성속도가 필요한 만큼 유도시간을 단축, 없애기 위해 계면활성제로 황산 도데실 나트륨 (sodium dodecyl sulphate)이 첨가된 수용액을 이용하였다. 계면활성제가 포함된 수용액에서의 하이드레이트 생성은 유도시간이 사라져 매우 빠르게 바뀌었고, 포집되는 이산화탄소도 15% 정도 증가되었다. 메탄의 경우에는 공극 크기가 작아질수록 하이드레이트 생성속도 및 가스 포집도가 저하되는 결과를 보였다. 이산화탄소의 경우와는 다르게 유도시간이 나타나지 않았으며 비교적 높은 가스 포집도를 얻기 위해서는 평형압력과 실험압력의 차이가 최소 2.0MPa 이상이어야 했다.
강성필(Kang, Seong-Pil),서유택(Seo, Yu-Taek),장원호(Chang, Won-Ho) 한국신재생에너지학회 2008 한국신재생에너지학회 학술대회논문집 Vol.2008 No.05
가스 하이드레이트의 생성속도와 전환율을 높이며, 동시에 생성유도시간을 억제하기 위한 방법으로 다공질 물질을 활용하여 공극 내에 물을 함침시킨 후 가스와 반응시키는 제조방법을 개발하였다. 내용적 10 L 의 대용량 고압 반응기를 제작하여 실험을 수행하였으며, 장치 대형화에 따른 다공질 실리카겔의 다짐현상에 의한 발열제어 등에 대한 문제점은 특별히 나타나지는 않았다. 하이드레이트 형성을 위한 구동력이 높을수록 생성속도가 좋아지는 것을 확인하였다. 일반 벌크상 하이드레이트 제조법과 비교하여 매우 높은 생성속도 및 전환율, 거의 제거된 생성유도시간 등은 응용기술로 활용하기에 매우 바람직한 특성으로써 선택적인 가스분리, 가스저장 매체로 활용이 가능하다.
실리카겔 공극에서의 이산화탄소 및 메탄 하이드레이트 상평형 측정 및 열역학적 예측
강성필(Kang, Seong-Pil) 한국신재생에너지학회 2007 한국신재생에너지학회 학술대회논문집 Vol.2007 No.06
Hydrate phase equilibrium for the binary co₂+water and CH4+water mixtures in silica gel pore of nominal 6, 30, and 100 nm were measured and compared with the cacluated results based on van der Waals and Platteeuw model. At a specific temperature three-phase hydrate-water-vapor (HLV) equilibrium curves for pore hydrates were shifted to the higher-pressure condition depending on pore sizes when compared with those of bulk hydrates. Notably, hydrate phase equilibria for the case of 100 nominal urn pore size were nealy identical with those of bulk hydrates. The activities of water in porous silica gels were modified to account for capillary effect, and the calculation results were generally in good agreement with the experimental data.
실리카겔 공극에서의 이산화탄소 및 메탄 하이드레이트 상평형 측정 및 열역학적 예측
강성필(Kang, Seong-Pil) 한국신재생에너지학회 2007 신재생에너지 Vol.3 No.2
Hydrate phase equilibrium for the binary CO_{2}+water and CH_{4}+water mixtures in silica gel pore of nominal 6, 30, and 100 nm were measured and compared with the cacluated results based on van der Waals and Platteeuw model. At a specific temperature three-phase hydrate-water-vapor (HLV) equilibrium curves for pore hydrates were shifted to the higher-pressure condition depending on pore sizes when compared with those of bulk hydrates. Notably, hydrate phase equilibria for the case of 100 nominal nm pore size were nearly identical with those of bulk hydrates. The activities of water in porous silica gels were modified to account for capillary effect, and the calculation results were generally in good agreement with the experimental data.
천연가스 하이드레이트 생산시 유발되는 하이드레이트 재생성의 압력효과 및 억제제의 저해효과
강성필(Kang, Seong-Pil) 한국신재생에너지학회 2011 한국신재생에너지학회 학술대회논문집 Vol.2011 No.05
천연의 메탄 하이드레이트를 생산하기 위한 방법으로는 크게 다음의 세 가지가 알려져 있다; 감압법, 열 자극법, 저해제 주입법. 갑압법이 가장 경제성이 높은 방법으로 보고 있으며, 이를 활용한 개발생산 시에는 해리 이후의 잔류 물에서 하이드레이트 전구체라고 알려진 하이드레이트 구조가 남아 있으며 이는 생산된 메탄 가스의 이송 과정에서 하이드레이트 재생성의 위험을 높이게 된다. 하이드레이트 재생성을 방지할 수 있는 한 가지 수단으로는 억제제를 주입하는 방법이 가능한데, 적절한 양을 주입함으로써 생산의 경제성을 높일 수 있다. 최근 들어 kinetic 억제제의 적용이 인기를 얻고 있는 바, 수용성 고분자인 이들 억제제를 적용하여 초기 하이드레이트 핵 생성을 지연시킬 수 있다. 이들 kinetic 억제제를 메탄 하이드레이트 생산 과정에서 투여하는 방법을 실험적으로 측정해 보았고, 잔류의 하이드레이트 구조에 대한 존재여부에 대하여 간접적으로 증명해보고자 하였다. kinetic 억제제로는 Poly Vinyl Caprolactam (PVCap)을 선택하였다. 해리압력, PVCap 주입 농도에 변화를 주면서 메탄 하이드레이트 생산, 수송과정에서 발생할 수 있는 하이드레이트 재생성 억제에 대한 효과를 실험적으로 측정하였다.