http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
유체 구조 연성 해석기법을 이용한 고속발사체에 미치는 공력의 수치해석적 연구
강민규,박동진,이석순,Kang, Mingyu,Park, Dongjin,Lee, Seoksoon 항공우주시스템공학회 2012 항공우주시스템공학회지 Vol.6 No.4
This paper is focusing on the define the safety of high speed projectiles from aerodynamic load. The Fin loaded from aerodynamic is the roll of high speed projectile's gide. The Fin can rotate about 25deg as maximum, and it has maximum aerodynamic load with 25deg position. For finite element analysis from aerodynamic load, fluid analysis will be conducted before structure analysis and export pressure data. The pressure data will be used as load condition at structure analysis of Fin. The result of structure analysis of Fin, there is some stress concentration and stress closed with yield stress of material. But this problem will be solved with change to another material.
중계기를 사용하는 다중 사용자 OFDMA 시스템을 위한 효율적인 인지 협력 통신 기법
강민규(Mingyu Kang),상영진(Young-Jin Sang),고병훈(Byung Hoon Ko),김광순(Kwang Soon Kim) 한국통신학회 2009 韓國通信學會論文誌 Vol.34 No.3
본 논문에서는 무선 중계기를 사용하는 다중 사용자 OFDMA 시스템에서 주파수 효율성을 향상시키기 위한 효율적인 인지 협력 통신 기법을 고려하였다. 먼저 인지 기술을 통한 효율적인 주파수 재사용으로 하향 링크의 처리율 (throughput)을 높일 수 있는 프레임 구조를 제안하였다. 그리고 주파수 재사용시 중계기로부터의 간섭 제거를 위한 선부호화 (precoding) 기법으로서 비교적 낮은 복잡도로 구현하기 쉬운 THP (Tomlinson-Harashima precoding)가 사용될 때, 각 사용자들이 궤환하는 양자화된 채널값의 오류에 따른 링크의 유효 신호대 잡음비를 수학적으로 유도하여, 이를 바탕으로 기지국이 효과적으로 적응 전송률 제어 (adaptive rate control)를 수행할 수 있도록 하였다. 시스템 레벨 모의실험을 통하여 본 논문에서 제안하는 인지 협력 통신 기법이 수행될 경우 추가적으로 발생하는 궤환량을 함께 고려한 전체적인 시스템의 주파수 효율성이 향상됨을 보였다. In this paper, we investigate the cognitive and cooperative communication scheme to improve the spectral efficiency in multiuser OFDMA systems using wireless relays. First, we propose the frame structure in which the efficient frequency reuse scheme with the cognitive technique is performed to increase the system throughput. And in the case where the THP (Tomlinson-Harashima precoding) is used for the elimination of interference from the relay, we derive the effective signal to noise ratio of the link largely affected by the channel quantization error. From the system level simulation results, it is shown that the proposed cognitive and cooperative communication scheme increases the overall system performance including the feedback overhead.
시뮬레이션 비용을 줄이기 위한 머신러닝을 활용한 결과 및 시간 예측
강민규 ( Mingyu Kang ),김지수 ( Ji-su Kim ),권훈 ( Hoon Kwon ),이정철 ( Jeongcheol Lee ) 한국정보처리학회 2019 한국정보처리학회 학술대회논문집 Vol.26 No.2
최근 계산과학 분야에서 시뮬레이션을 활발하게 이용하고 있다. 그리고 IT 기술의 발전에 힘입어 이제는 시뮬레이션을 별도의 복잡한 절차 없이 온라인으로 할 수 있게 되었다. LCAODFTLab은 EDISON 플랫폼에서 제공하는 나노물리 분야의 시뮬레이션 프로그램이다. LCAODFTLab은 온라인 환경에서 사용자에 의해 주어진 원자구조에 대한 전자구조 시뮬레이션을 제공한다. 이처럼 실제로 실행하기 어려운 실험을 간단히 행하는 시뮬레이션은 얼마나 정밀하고 복잡한가에 따라 비용이 발생한다. 이러한 비용은 대체로 사용자에게 부담이 되고, 따라서 시뮬레이션의 수행비용을 줄이는 것은 아주 중요한 요소이다. 따라서 본 논문에서는 EDISON 플랫폼 사용자의 데이터와 머신러닝을 활용하여 시뮬레이션 비용을 줄이는 방법을 소개한다. 이를 통해 사용자는 큰 비용을 지불하지 않고 결과를 예측할 수 있고, 대략적인 수행시간을 알 수 있다.
강민규 ( Kang¸ Mingyu ),하민균 ( Ha¸ Min-gyun ),허창재 ( Heo¸ Chang-jae ),안진희 ( Ahn¸ Jin-hee ) 한국구조물진단유지관리공학회 2023 한국구조물진단유지관리공학회 학술발표대회 논문집 Vol.27 No.2
아연도금은 구조물에 설치된 강재의 표면에 용융된 아연층을 형성하여 부식을 유발하는 환경인자로부터 강재를 차단하여 방식성능을 확보하는 방법이다. 일반적으로 아연도금은 기타부재에 적용되는 방식 방법으로, 기타부재라 하더라도 열악한 부식환경에 노출된 아연도금 부재의 국부적인 부식열화로 인한 부재자체의 손상이 발생할 수 있으므로, 아연도금 부재의 부식열화상태에 대한 지속적인 확인이 필요하다. 본 연구에서는 아연도금 강재의 부식열화 상태를 평가하기 위하여 실내 염수분무실험을 진행하였으며, 촉진싸이클에 따른 아연도금 시편의 외관상태를 비교하였다. 촉진싸이클에 따른 아연도금의 외관상태를 비교한 결과, 촉진싸이클이 진행됨에 따라 아연도금의 초기색상과 비교하여 표면이 하얗게 변색되어 아연도금 층이 소모되면서 강재표면에 녹이 발생하고 확장하는 것을 확인하였다.
강민규(Mingyu Kang),이치범(Chibum Lee) Korean Society for Precision Engineering 2022 한국정밀공학회지 Vol.39 No.5
Recently, interest in Prognostics and Health management (PHM) has been increasing as an advanced technology of maintenance. PHM technology is a technology that allows equipment to check its condition and predict failures in advance. To realize PHM technology, it is important to implement artificial intelligence technology that diagnoses failures based on data. Vibration data is often used to diagnose the state of the rotating machine. Additionally, there have been many efforts to convert vibration data into 2D images to apply a convolutional neural network (CNN), which is emerging as a powerful algorithm in the image processing field, to vibration data. In this study, a series of PHM processes for acquiring data from a rotary machine and using it to check the condition of the machine were applied to the rotary table. Additionally, a study was conducted to introduce and compare two methodologies for converting vibration data into 2D images. Finally, a GUI program to implement the PHM process was developed.
다중 사용자 MIMO-OFDMA 시스템에서 부분 궤환 정보를 이용한 비례적 공정 스케줄링의 성능 분석
강민규(Mingyu Kang),변일무(Ilmu Byun),박진배(Jin Bae Park),김광순(Kwang Soon Kim) 한국통신학회 2008 韓國通信學會論文誌 Vol.33 No.6A
본 논문에서는 다중 사용자 다중 안테나-직교 주파수 분할 다중 접속 방식 (MIMO-OFDMA) 시스템에서 부분 궤환 정보를 이용한 정규화된 신호 대 잡음비 기반 비례적 공정 스케줄링 (normalized SNR based proportional fair scheduling, NSNR-PFS)을 수행할 경우의 시스템 성능에 대하여 분석하였다. 선택적 부분 채널 품질 정보 궤환 기법 (selective partial channel quality information feedback scheme, SPCQI)이 사용되었을 경우의 하향 링크 채널 용량의 정확한 식을 유도하고, 그것의 점근적 특성을 분석하였다. 이론적 성능 분석과 모의 실험을 통하여 사용자의 수와 상관없이 한정된 평균 궤환량만을 이용하여 최적의 하향 링크 채널 용량 증가율을 얻을 수 있음을 보였다. In this paper, we analyze the performance of normalized SNR based proportional fair scheduling with partial feedback information for multiuser MIMO-OFDMA systems. The closed form expression on the downlink capacity of the selective partial CQI feedback scheme is derived and its asymptotic behavior is investigated. From the performance analysis and numerical results, it is found that the optimal growth rate of downlink capacity can be achieved with bounded average feedback overhead irrespective of the number of users.