http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
광학 박막을 채용한 CMOS 이미지 센서 픽셀의 수광 효율
강명훈,고은미,이제원,조관식,Kang, Myung-Hoon,Ko, Eun-Mi,Lee, Je-Won,Cho, Guan-Sik 한국광학회 2009 한국광학회지 Vol.20 No.1
We consider introducing an optical thin film to the light guiding wall of a pixel in order to enhance the light guiding efficiency of a CMOS image sensor. Simulating the reflectance as a function of the incidence angle using the Essential Macleod program, we find that the range of total internal reflection is greatly increased for several materials. Particularly when air is chosen as the thin film material, the critical angle of total internal reflection could be shifted to about 50 degrees. CMOS 이미지 센서의 수광 효율을 높이기 위해서 픽셀의 광 통로 벽에 광학 박막의 도입을 제안하고자 한다. Essential Macleod를 이용하여 시뮬레이션해 본 결과, 전반사가 일어나는 범위가 현저히 증가하였다. 특히 공기 박막을 도입할 경우에, 그 효과가 가장 현저하여, 광 통로 벽에서의 전반사 임계각이 50도로까지 확대되었다.
물 묻은 지문을 인식하기 위한 프리즘 광학계의 설계 및 실험적 고찰
강명훈,김진수,정진우,고은미,김재규,조관식,송한정,황재문,Kang, Myung-Hoon,Kim, Jin-Su,Jung, Jin-Woo,Ko, Eun-Mi,Kim, Jae-Gu,Cho, Guan-Sik,Song, Han-Jung,Hwang, Jae-Mun 한국광학회 2007 한국광학회지 Vol.18 No.6
본 연구는 지문 인식 시스템 중에서 프리즘을 이용한 광학계의 설계에 대한 것이다. 이는 프리즘, 렌즈, 그리고 CMOS 이미지 센서(혹은 CCD) 등으로 구성되어 있는 광학계이다. 종래의 프리즘을 이용한 지문인식 광학계에서는 지문에 물이 묻어 있는 경우에 영상의 품질이 현저히 저하되는 문제점이 있다. 이 경우에 프리즘의 굴절률을 높임으로써 영상의 품질을 충분히 높일 수 있었다. 또한 프리즘과 렌즈를 사용함으로 인하여 발생하는 비대칭 축소 왜곡(anamorphic distortion)과 상면의 지를 최소화되는 프리즘 꼭지각 $\alpha$를 제안한다. We propose a design and analysis of an optical system using a prism with a high enough refractive index for wet fingerprint identification. Important parameters including the tilting angle($\beta$) of the $1^{st}$ image plane, an anamorphic distortion, and a tilt of image plane are considered in terms of the apex angle of the prism($\alpha$) and refractive index of the prism material. Our suggestion on refractive index and apex angle of the prism corroborates well with experimental results.
강명훈(Myung Hoon Kang),전승호(Seung Ho Jeon),이세훈(Se Hun Lee),윤성탁(Seong Tak Yoon),황재복(Jae Bok Hwang),김석현(Seok Byun Kim),심상인(Sang In Shim) 韓國雜草學會 2010 Weed&Turfgrass Science Vol.30 No.3
피복작물을 이용한 잡초 방제효과와 녹비효과를 비교 분석하여 효과적인 피복작물-잡곡 작부체계를 알아보기 위한 호밀과 자운영을 이용하여 포장시험을 수행한 결과는 다음과 같다. 피복작물의 잡초 방제효과는 잡초의 발아억제와 생육저해로 잡곡 초기생장에 있어 잡초발생시기를 늦추었다. 그러나 잡초 방제기간이 자운영은 30일 내외, 호밀은 40일 내외로 자운영보다 호밀의 잡초방제 효과가 뛰어난 것으로 나타났다. 무처리구와 자운영 피복구는 잡곡의 출수기 차이는 나타나지 않았으나, 호밀의 피복구에서는 7일 정도 지연되었다. 피복작물에 대한 기장의 초장은 30%, 건물중은 70% 이상의 피해를 받았고, 조의 초장은 25%, 건물중은 60% 이상의 피해를 보였다. 그러나 시간이 경과함에 따라 조, 기장, 수수 모두 많은 회복을 보였으며, 특히 수수에서는 초장은 거의 회복되었으며, 건물중도 56% 까지 회복하였다. The study was conducted to evaluate the weed suppressing effects of two winter cover crops, Chinese milk vetch (CMV) and rye, in minor cereal fields in 2009. The suppressing activities of cover crops were due to the allelopathy of cover crops during weed emerging periods and competitive activity during vegetative growth of weeds. Weed suppression by cover crops were changed from 26.5 g m-2, 0.1 g m-2 and 0.2 g m-2 in control, rye field and CMV field, repectively, on June 22 to 428.6 g m-2, 1 g m-2 and 403.9 g m-2 in control, rye field and CMV field, respectively, on July 22. The weed dry weights were further changed to 656.3 g m-2, 607.8 g m-2 and 511.8 g m-2 in control, rye field and CMV field, respectively on August 22. The suppressing effect of cover crops also observed in minor cereals. Plant height and dry weight of sorghum was reduced to 68.7% and 33.6% of handweeding, respectively, on August 5. The reduction was recovered to 82.7% and 55.6% of control, respectively, on August 26. In addition, heading date of minor cereals was delayed by 7 days with rye.
시뮬레이션을 이용한 자동차 부품 공급 시스템 도입 방안 분석: R자동차 사례
강명훈(Kang, Myung Hoon),곽춘종(Kwak, Choon Jong) 전북대학교 산업경제연구소 2014 아태경상저널 Vol.6 No.1
본 논문은 R자동차 공장 사례를 통해 공장 내 물류 개선 방안을 연구하고자 한다. 즉, 유인 견인차로 공급되던 도어 조립체, 후드 조립체, 트렁크 조립체를 AGV를 이용하여 공급하기 위해 무인공급시스템으로의 전환 타당성을 검토한다. 검토 수단으로는 Witness 컴퓨터 시뮬레이션 기법을 적용한다. 본 실험에서는 우선 AGV의 적정 필요 대수를 산출한다. 또한 AGV 전용 도로를 왕복 1차선으로 적용하는 가능성을 확인한다. 마지막으로 무인공급시스템의 투자타당성 분석을 통해 무인공급시스템으로의 전환이 타당함을 보인다. This research studies an alternative plan to improve the material flow between two production lines through a case of R motors. That is, this paper investigates the effectiveness of changing manned tow trucks into an unmanned logistics system based on AGVs (Automated Guided Vehicles) to move door, hood, and trunk assemblies. Witness is adopted for this simulation study. The experiment first determines the optimal number of AGVs. In addition, the use of a single line is tested for AGVs. Finally, this research shows that the investment on the unmanned logistics system is effective.
염료감응형 태양전지의 탄소나노튜브 상대전극의 광투과도와 전기화학적 특성이 에너지 변환 효율에 미치는 영향
한영문,황숙현,강명훈,김영주,김현국,김상효,배효준,최현광,전민현,Han, Young-Moon,Hwang, Sook-Hyun,Kang, Myung-Hoon,Kim, Young-Joo,Kim, Hyun-Kook,Kim, Sang-Hyo,Bae, Hyo-Jun,Choi, Hyon-Kwang,Jeon, Min-Hyon 한국전기전자재료학회 2011 전기전자재료학회논문지 Vol.24 No.4
In this work, electrochemical characteristics and optical transmittance of carbon nanotubes (CNTs) counter electrodes which had different amount of CNTs in CNTs slurries were analyzed. Two-step heat treatment processes were applied to achieve well-fabricated CNTs electrode. Three sets of CNTs electrodes and dye-sensitized solar cells (DSSCs) with CNTs counter electrodes were prepared. As the amount of CNTs increased, sheet resistance of CNTs electrode decreased. CNTs electrode with low sheet resistance had low electrochemical impedance and fast redox reaction. On the other hand, in case of CNTs counter electrode with low density of CNTs, performance of the dye-sensitized solar cell was improved due to its high optical transmittance. We found that the transmittance of CNTs counter electrode influence the performance of dye-sensitized solar cells.
IRFPA용 CMOS readout 회로를 위한 저잡음 OP-AMP
김소희(So Hee Kim),박민영(Min Young Park),최충기(Chung Ki Choi),강명훈(Myung Hoon Kang),문준희(Jun Hee Mun),박치영(Chi Young Park),박용수(Yong Soo Park),송한정(Han Jung Song),전민현(Min Hyun Jeon) 대한전자공학회 2006 대한전자공학회 학술대회 Vol.2006 No.11
A CMOS ROIC (ReadOut Integrated Circuit) for IRFPA (InfraRed Focal Plane Array) detector is a key component in uncooled thermal imaging systems. For a good IR (InfraRed) detector, low noise ROIC is needed. In this paper, a low noise CMOS OP-AMP for ROIC circuit of the 32×32 IR bolometer detector has been designed. HSPICE simulation results with a 0.35 ㎛ CMOS technology are unit gain bandwidth of 12.8 ㎒, 89 ㏈ open loop gain, 8 V/㎛ slew rate, 600 ㎱ settling time and 67° phase margin.