한우에서 $PGF_{2{\alpha}}$ 투여 후 난포 크기 및 발달 과정에 따른 발정 증상의 발현

박철호,류재선,유대중,박인철,김종택,서국현,오기석,손창호,Park, Chul-Ho,Ryu, Jae-Sun,Yu, Dae-Jung,Park, In-Chul,Kim, Jong-Taek,Suh, Guk-Hyun,Oh, Ki-Seok,Son, Chang-Ho 한국수정란이식학회 2012 한국동물생명공학회지 Vol.27 No.3

This study was operated to establish induction using ultrasonography by estimating the relation of follicle size and estrus manifestation. Clinical estrus symptoms were observed 97.4% in cows and 87.5% in heifers when overall 55 cows were induced to estrus in a single dose of $PGF_{2{\alpha}}$ after verifying CL through ultrasonography, which means estrus hours among those 52 cows showing the clinical estrus symptoms were estimated 2.39 days on cows and for 2.37 days on heifers which showed no differences (p>0.05). The estrus manifestation hours according to the follicle size in cows didn't have any significance each other (p>0.05), though estrus hours was 54 hours (the shortest) with follicle size bigger than 10 mm and were made up within 69 hours. The estrus manifestation hours according to the follicle size in heifers didn't have any significance each other (p>0.05) and took around 42 hours (the shortest) with follicle size of 5mm (the smallest) and were made up within 66 hours. Follicles after $PGF_{2{\alpha}}$ injection were ovulated and assigned to many phases as follows; Group 1 (growing phase) - continuously growing into ovulation, Group 2 (growing and static phase) - delaying in growth after the growth of follicles, Group 3 (static and growing phase) - growing after growth delay, Group 4 (regressing and new growing phase) - the follicle is closed and a new follicle grows. In addition, the process of follicle development and estrus hours had no significance each other (p>0.05), though estrus manifestation hours in Group 1 and 2 was relatively short, and in Group 3 and 4 for a relatively long time. In the result of all above, the estrus manifestation hours after $PGF_{2{\alpha}}$ injection has no differences accoring to the follicle size in cows and heifers. Therefore, High pregnancy rate is obtained when practicing artificial insemination within 3 days in estrus or TAI in 72 to 80 hours after adminitrating $PGF_{2{\alpha}}$.

국방획득체계를 위한 시스템엔지니어링 지침 및 발전 전략에 대한 연구

박철호,박종선,김호성,김병철,Park, Chul Ho,Park, Jong Sun,Kim, Ho Sung,Kim, Byong Chol 한국시스템엔지니어링학회 2009 시스템엔지니어링학술지 Vol.5 No.2

A newly established provision to enforce the systems engineering was added in the regulation for arms acquisition management in January 2009, and a systems engineering guidelines for defence acquisition is being developed. In this paper we conduct a comparative study of the defence acquisition system in the United States and the Republic of Korea, and propose a improving plan about the domestic defence acquisition system.

한우에서 $PGF_{2{\alpha}}$ 투여에 의한 발정유도 후 난소 구조물 및 호르몬의 변화와 수태율

박철호,류재선,유대중,박인철,김종택,서국현,오기석,손창호,Park, Chul-Ho,Ryu, Jae-Sun,Yu, Dae-Jung,Park, In-Chul,Kim, Jong-Taek,Suh, Guk-Hyun,Oh, Ki-Seok,Son, Chang-Ho 한국수정란이식학회 2012 한국동물생명공학회지 Vol.27 No.3

This study was carried out to develop the useful inducing method of estrus for Korean native cows. Under the condition of estrus induction by administering $PGF_{2{\alpha}}$ for the cows in which corpus luteum (CL) in ovaries was detected by ultrasonography, ovarian responses and the changes of progesterone ($P_4$) concentration against $PGF_{2{\alpha}}$ compared with conception rate were observed in cows and heifers. In inducing estrus administering $PGF_{2{\alpha}}$. to the cows which has corpus luteum in ovaries, ovarian reponses, the changes of progesterone concentration, and conception rate were identified and compared. The results attained from the studies were as follows. Significant decreases of CL in size over time after $PGF_{2{\alpha}}$ administration were detected in both cow and heifer groups (p<0.001), but not different between groups in the CL regression rate (p>0.05). In addition, the percentage changes relative to the plasma $P_4$ concentration on day 1 after $PGF_{2{\alpha}}$ treatment were decreased to below 1ng/ml. The growth rate of follicle was observed as 31% on day 1 and 42% on day 2 in cows, and 34% on day 1 and 97% on day 2 in heifers, resulting that growth of heifers are faster than that of cows (p<0.05). The conception rate after $PGF_{2{\alpha}}$ treatment were 60.5% and 64.2% in cows and heifers, respectively. It also indicated that the conception rate after estrus observation with $PGF_{2{\alpha}}$ injection was as high as 66.6% while that with timed-artificial insemination (TAI) regardless of the estrus observation was 56%, which means the pregnancy rate of artificial insemination after estrus observation was higher than that of TAI (p<0.05). In the result of all above, there were significant decreases in CL size and the plasma $P_4$ concentration by days but rapid growth in follicles, which has no differences in cows and heifers. The conception rate was commonly high after estrus observation and more than 50% under TAI.

젖소에서 $PGF_2{\alpha}$ 투여에 의한 발정 유도 후 수태율과 다른 인자와의 관계

박철호,임원호,서국현,오기석,손창호,Park, Chul-Ho,Lim, Won-Ho,Suh, Guk-Hyun,Oh, Ki-Seok,Son, Chang-Ho 한국수정란이식학회 2010 한국동물생명공학회지 Vol.25 No.3

The purpose of this study was to determine the relationship between conception rate and other parameters (body condition score; BCS, progesterone concentrations and follicle size) before estrus induction with $PGF_2{\alpha}$. The conception rate in cows with (2.75, 2.75 to 3.25 and 3.25), BCS regardless of AI (artificial insemination) time was 47.5, 67.5% and 48.5% at $PGF_2{\alpha}$ injection, respectively. The conception rate regardless of BCS was 59.0% in cows inseminated based on detected estrus, and 46.2% in cows inseminated at 72 to 80 hours (timed artificial insemination, TAI) after $PGF_2{\alpha}$ injection. The conception rate regardless of AI time was 43.0% in cows with low progesterone concentrations (less than 1.0 ng/ml), and 67.5% in cows with high progesterone concentrations (more than 1.0 ng/ml) at $PGF_2{\alpha}$ injection. The conception rate regardless of progesterone concentrations was 59.9% in cows inseminated based on detected estrus, and 48.1% in cows of TAI after $PGF_2{\alpha}$ injection. The conception rate regardless of AI time was 36.0% in cows with small dominant follicles (less than 5 mm), 56.0% in cows between 5 mm to 10 mm of follicle size, and 65.5% in cows with large dominant follicles (more than 10 mm) at $PGF_2{\alpha}$ injection, respectively. The conception rate regardless of follicle size was 57.3% in cows inseminated based on detected estrus, and 47.6% in cows of TAI after $PGF_2{\alpha}$ injection. These results indicated that if the cows with BCS 2.75 to 3.25, active corpus luteum, and/or large dominant follicle (more than 10 mm) are used for estrus induction, the conception rate will be greater.

MMSE-STSA 기반의 음성개선 기법에서 잡음 및 신호 전력 추정에 사용되는 파라미터 값의 변화에 따른 잡음음성의 인식성능 분석

박철호,배건성,Park Chul-Ho,Bae Keun-Sung 대한음성학회 2006 말소리 Vol.57 No.-

The MMSE-STSA based speech enhancement algorithm is widely used as a preprocessing for noise robust speech recognition. It weighs the gain of each spectral bin of the noisy speech using the estimate of noise and signal power spectrum. In this paper, we investigate the influence of parameters used to estimate the speech signal and noise power in MMSE-STSA upon the recognition performance of noisy speech. For experiments, we use the Aurora2 DB which contains noisy speech with subway, babble, car, and exhibition noises. The HTK-based continuous HMM system is constructed for recognition experiments. Experimental results are presented and discussed with our findings.

ZnO 수용액중에서 일산화탄소의 광화학적 거동

박철호,장우석,김용성,박형련,Chul-Ho Park,Woo-Suk Chang,Yong-Sung Kim,Hyoung-Ryun Park 대한화학회 2003 대한화학회지 Vol.47 No.3

일산화탄소가 포화된 수용액에 광촉매로서 산화아연을 용액 1 ml 당 0.4 mg의 양을 첨가한 다음, $25{\pm}0.1^{\circ}C$에서 253.7 nm의 자외선을 조사시켜 일산화탄소의 광화학적 변환반응을 연구하였다. 그 결과 일산화탄소가 포화된 수용액은 253.7 nm의 자외선에 의해 카르복실화반응과 카르보닐화반응이 진행되어 포름산, 옥살산, 글리옥실산, 포름알데하이드 및 글리옥살이 주로 생성되었다. 이들 화합물들의 생성은 용액의 pH값에 영향을 받았는데, 산성용액에서는 포름알데하이드와 글리옥살의 생성이 증가하였으나, 염기성용액에서는 오히려 감소하였다. 하지만 유기산의 경우에는 산성용액에서는 큰 변화가 없었으나, 포름산의 경우에는 11.5 이상의 pH에서 급격히 증가하였다. 반응의 결과 생성된 각 생성물들에 대한 초기양자수득율을 계산하였으며, 이들 결과로부터 산화아연이 포함된 일산화탄소 수용액의 광화학 반응에 대한 가능한 반응메카니즘을 제시하였다. The photochemical transformation of carbon monoxide in aqueous solution has been investigated at $25{\pm}0.1^{\circ}C$using ZnO as a photocatalyst. After irradiation of 253.7 nm UV light in the solution, carboxylation and carbonylation processes were carried out, and the formation of formic acid, oxalic acid, glyoxylic acid, formaldehyde and glyoxal was observed. The formation of the products depended on the pH values in the solution. The yield of formaldehyde and glyoxal increased in acidic solution whereas it decreased in basic solution. When the pH values in the solution increased above 11.5, the yield of formic acid increased rapidly. The initial quantum yields of the products were determined and the probable mechanisms for the reactions were presented on the basis of the products analysis.

이동 기반의 RMC을 이용한 자유형태 곡면 매칭방법

박철호,Park, Chul-Ho 한국정보처리학회 2000 정보처리논문지 Vol.7 No.11

매칭방법은 기하 및 입체 모델링에서 재단 곡면과 이들에 대한 부울 연산에 사용되는 기초적인 연산이다. 그러나 매칭연산은 부드러움을 정확하게 표현하는데 고 차수의 미분계수 제약조건으로 인하여 많은 계산량이 필요할 뿐만 아니라 곡면상의 여러 점을 동시에 선택하여 이동하였을 때, 곡면표현에 사용되는 복잡한 함수식으로 인하여 일반해를 구하기 어려운 단점을 가진다. 본 논문은 분수식에 의하여 RMC(Rotation-Minimizing Curve)을 정의하고 이를 이용하여 자유 형태 곡면간에 변형 매칭 방법을 제안한다. RMC는 매칭곡선과 곡면의 접선벡터, 회전벡터, 곡률의 변화율과 같은 기하학적 기법을 기반으로 한다. 제안한 방법은 입력으로 주어지는 곡면의 기하학적 복잡도와는 무관하게 매칭을 수행할 수 있으며 수행 성능은 계산된 매칭 곡선의 복잡도에 의해서만 좌우된다. 또한 곡선 표현에 사용된 값들을 정의된 매칭 곡선식에 그대로 적용할 수 있었으므로 최적화 응용 문제에 효율적으로 적용할 수 있다.

PbO 완충층을 이용한 Pt/Pb_1.1Zr_0.53Ti_0.47O₃/PbO/Si (MFIS)의 미세구조와 전기적 특성

박철호,송경환,손영국,Park, Chul-Ho,Song, Kyoung-Hwan,Son, Young-Guk 한국세라믹학회 2005 한국세라믹학회지 Vol.42 No.2

PbO 완충층의 역할을 확인하기 위해, r.f. magnetron sputtering법을 이용하여 p-type (100) Si 기판 위에 $Pt/Pb_{1.1}Zr_{0.53}Ti_{0.47}O_{3}$와 PbO target으로 Pt/PZT/PbO/Si의 MFIS 구조를 제조하였다. MFIS 구조에 완충층으로 PbO를 삽입함으로써 PZT 박막의 결정성이 크게 향상되었고, 박막의 공정온도도 상당히 낮출 수 있었다. 그리고 XPS depth profile 분석 결과, PbO 증착시 기판온도가 PbO와 Si의 계면에서 Pb의 확산에 미치는 영향을 확인하였다. PbO 완충층을 삽입한 MFIS는 높은 메모리 윈도우와 낮은 누설전류 밀도를 가지는 추수한 전기적 특성을 나타내었다. 특히, 기판온도 $300^{\circ}C$에서 증착된 PbO를 삽입한 Pt/PZT(200nm, $400^{\circ}C)PbO(80nm)/Si$는 9V의 인가전압에서 2.OV의 가장 높은 메모리 윈도우 값을 나타내었다. To study the role of PbO as the buffer layer, Pt/PZT/PbO/Si with the MFIS structure was deposited on the p-type (100) Si substrate by the r.f. magnetron sputtering with $Pb_{1.1}Zr_{0.53}Ti_{0.47}O_3$ and PbO targets. When PbO buffer layer was inserted between the PZT thin film and the Si substrate, the crystallization of the PZT thin films was considerably improved and the processing temperature was lowered. From the result of an X-ray Photoelectron Spectroscopy (XPS) depth profile result, we could confirm that the substrate temperature for the layer of PbO affects the chemical states of the interface between the PbO buffer layer and the Si substrate, which results in the inter-diffusion of Pb. The MFIS with the PbO buffer layer show the improved electric properties including the high memory window and low leakage current density. In particular, the maximum value of the memory window is 2.0V under the applied voltage of 9V for the Pt/PZT(200 nm, $400^{\circ}C)/PbO(80 nm)/Si$ structures with the PbO buffer layer deposited at the substrate temperature of $300^{\circ}C$.

R.F. Magnetron Sputtering으로 다양한 Interlayer 층위에 형성시킨 PZT 박막의 미세구조와 강유전 특성

박철호,최덕영,손영국,Park, Chul-Ho,Choi, Duck-Young,Son, Young-Guk 한국세라믹학회 2002 한국세라믹학회지 Vol.39 No.8

R. F. magnetron sputtering법을 이용하여 Pt/Ti/$SiO_2$/Si 기판 위에 $Pb_{1.1}Zr_{0.53}Ti_{0.47}O_3$ target을 사용하여 박막을 제조하였다. Interlayer(PbO, $TiO_2$, PbO/$TiO_2$)층을 삽입함으로써 박막의 결정성을 향상시켰고, 박막의 기판온도도 상당히 낮출 수 있었다. 순수한 PZT에 비하여 interlayer를 삽입한 PZT는 높은 유전상수과 낮은 유전손실 및 높은 누설전류를 가지는 우수한 전기적 특성을 나타내었다. 이러한 PZT 박막과 interlayer 층은 증착온도에서 서로 반응하여 하나의 고용체를 이루지 않고, 각각 독립적인 층으로 존재함을 XPS 분석을 통해 확인하였다. 여러 interlayer중 특히 PbO/$TiO_2$는 우수한 유전특성(${\varepsilon}_r$=414.94, tan${\delta}$=0.0241, Pr=22${\mu}C/cm^2$)을 나타내었고 가장 효과적인 seed로써의 역할을 하였다. The PZT thin films werre deposited on Pt/Ti/$SiO_2$/Si substrate by R. F. magnetron sputtering with $Pb_{1.1}Zr_{0.53}Ti_{0.47}O_3$ target. When interlayers(PbO, $TiO_2$, PbO/$TiO_2$) were inserted between PZT and Pt, the crystallization of the PZT thin films was considerably improved and the processing temperature was lowered. Compared to the pure PZT thin films, dielectric constant, dielectric loss and polarization properties of PZT thin films with interlayers were considerably improved. From XPS depth profile analysis, it was confirmed that PZT thin films and interlayers existed independently. In particular, PZT thin films deposited on interlayer(PbO/$TiO_2$) showed the best dielectric property (${\varepsilon}_r$=414.94, tan${\delta}$=0.0241, Pr=22${\mu}C/cm^2$).

자동차 잡음 및 오디오 출력신호가 존재하는 자동차 실내 환경에서의 강인한 음성인식

박철호,배재철,배건성,Park, Chul-Ho,Bae, Jae-Chul,Bae, Keun-Sung 대한음성학회 2007 말소리 Vol.62 No.-

In this paper, we carried out recognition experiments for noisy speech having various levels of car noise and output of an audio system using the speech interface. The speech interface consists of three parts: pre-processing, acoustic echo canceller, post-processing. First, a high pass filter is employed as a pre-processing part to remove some engine noises. Then, an echo canceller implemented by using an FIR-type filter with an NLMS adaptive algorithm is used to remove the music or speech coming from the audio system in a car. As a last part, the MMSE-STSA based speech enhancement method is applied to the out of the echo canceller to remove the residual noise further. For recognition experiments, we generated test signals by adding music to the car noisy speech from Aurora 2 database. The HTK-based continuous HMM system is constructed for a recognition system. Experimental results show that the proposed speech interface is very promising for robust speech recognition in a noisy car environment.