http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
유리섬유를 이용한 손상된 프리스트레스트 콘크리트 보의 보강공법 개발연구
강원호,한만엽,이택성,유영민,Kang, Won-Ho,Han, Man-Yop,Lee, Taek-Sung,Rhu, Young-Min 한국콘크리트학회 1999 콘크리트학회지 Vol.11 No.2
현재 국내에는 지난 35년간 프리스트레스트 콘크리트보를 이용한 합성형 교량이 매우 널리 건설, 사용되어 왔으나, 교통량의 증가와 차량하중의 증가로 노후화가 점차 가속화되고 있는 형편이다. 본 연구에서는 유리섬유를 이용하여 손상된 프리스트레스트 콘크리트 교량을 보강하는 방법의 효과를 평가하기 위하여 무보강 표준시험체와 선행 하중의 재하로 균열이 발생한 8개의 시험체에 대하여 유리섬유 보강, 외부강선 보강 및 두가지 보강 방법을 병행한 보강을 실시하여 각 보강방법의 효과를 비교, 분석하였다. 실험결과, 최대하중은 외부강선 보강 시험체와 유리섬유 보강 시험체가 모두 거의 유사한 정도의 보강효과를 발휘함으로써 유리섬유 보강공법이 손상된 프리스트레스트 콘크리트 교량의 보강에 적용될 수 있는 것으로 판명되었다. 외부강선 보강공법에서의 가장 큰 문제가 단부의 정착장치인 것과 마찬가지로 유리섬유 보강 공법의 경우에도 최대하중에 도달하기 이전에 보강재의 부착이 파괴되지 않도록 적절한 방법을 선정하는 것이 매우 중요하며, 본 연구에서 검증된 두가지 방법이 단부의 정착기능을 충분히 발휘하는 것으로 판명되어, 이들 방법들이 적절히 사용될 경우에는 설계된 내하력의 증가를 기대할 수 있는 것으로 나타났다. Many composite girder bridges have been constructed for about thirty five years. Nowadays they are aged or deteriorated because of the increase in traffic and vehicle loads. In this study, the effect of strengthening with glass fiber sheet is investigated to estimate the possibility for applying to damaged prestressed concrete bridges. One normal and eight cracked specimens which had been preloaded were tested. The cracked specimens were strengthened with either external prestressing or bonding glass fiber sheet, or using both methods. The results showed that the maximum loads are almost same for both methods. So it seems that the strengthening with glass fiber sheet can be used for strengthening damaged prestressed concrete girders. It is important that proper devices should be selected to prevent glass fiber sheet from premature bonding failure below its maximum load, which is similar to end anchorage problem in external prestressing method. It is proved that the devices proposed in this paper have sufficient anchoring capability to increase load carrying capacity.
부분(部分) 프리스트레스트 콘크리트 들보의 전단해석을 위한 '빗 구조' 모델
강원호,Kang, Won Ho 대한토목학회 1992 대한토목학회논문집 Vol.12 No.2
이 논문에서는 철근 콘크리트 부재의 전단 해석을 위한 트러스 유사법이 발전된 형태인 '빗 구조' 해석 모델을 부분 프리스트레스트 콘크리트 부재의 전단 해석을 위해 수정하여 제안 하였다. 제안된 '빗 구조' 모델은 콘크리트 압축대의 위치와 경사 및 사압축대의 경사가 하중과 프리스트레스의 크기에 따라서 변하는 것이다. 역학적 모델의 구성을 위하여 비선형 보, 트러스 요소를 사용하였으며, 사압축대의 경사를 결정하기 위한 식을 '압축대' 이론을 수정하여 유도하였다. '빗구조' 모델에 의한 해석 결과를 부분 프리스트레스트 콘크리트 부재의 재하 실험 결과와 비교하였다. 이에 따르면 '빗 구조' 해석 결과에 의한 전단 철근의 응력은 수정 M$\ddot{o}$rsch이론과 고전 M$\ddot{o}$rsch 이론에 의한 계산치의 중간 정도의 값이다. 처짐과 전단철근의 응력값을 비교한 결과, 본 논문에서 제안된 '빗 구조' 모델이 부분 프리스트페스트 콘크리트 부재의 전단 해석에 사용될 수 있음을 알 수 있었다. In this study, the 'Comb-structure' model which has been developed from truss analogy is modified in order to be applied to the shear analysis of partially prestressed concrete members. The proposed 'Comb-structure' model is modified so that the position, the slope of concrete compressive chord and the slope of concrete diagonal strut may change according to the magnitude of loads and prestress. For the proposed mechanical model, non-linear beam and truss elements are used. By modifying the 'Compression-Field' theory, the equation to determine the slope angle of concrete diagonal strut can be induced. The anaysis results by the proposed 'Comb-structure' model are compared with the experimental results and validity of model is examined. It shows that the the result of 'Comb-structure' analysis lies between that of the modified M$\ddot{o}$rsch theory and classical M$\ddot{o}$rsch theory, and close to the measured value after cracking. The deflection of the beam and the stress of stirrup show good agreement, so it can be concluded that the proposed 'Comb-structure' analysis model explains the shear behavior of partially prestressed concrte beams after crack initiation.
이동물체를 위한 빔포밍 기반의 빔그룹 기법 및 이동성 판단기법
강원호 ( Won-ho Kang ),조인휘 ( In-whee Joe ) 한국정보처리학회 2016 한국정보처리학회 학술대회논문집 Vol.23 No.1
본 논문은 이동물체를 위한 빔포밍 기술에서 핸드오버로 인한 시간지연을 감소시키기 위한 빔그룹 기법과 단말의 이동성에 따라 빔 자원할당을 유동적으로 할당하기 위한 단말의 이동성 판단기법을 제안한다. 빔그룹 기법의 Bestcase와 Worstcase에 대해 단일 빔과 비교하였을 때 장점을 비교분석하고, 시뮬레이션을 통해 moving average와 도로의 특징을 바탕으로 이동성을 예측한 값이 어느정도의 정확도를 보이는지 확인한다. 본 논문에서 이동물체는 차량으로 한정한다.