전북지방 젖소의 유방염 검색

조정곤,김종면,최민순,채효석,강명대,송희종 全北大學校 附設 畜産開發硏究所 1987 畜産開發硏究報告 Vol.1 No.-

A total of 444 quarters milk samples of 111 dairy cattle in Chonbuk area were examined for infection rete and causative agents of mastitis by "the laboratory procedures used in the Connecticut Mastitis Control Program (CMCP) and California mastitis Test (CMT)". The results obtained were as follows: 1. Of 444 samples, 39.2% had positive CMCP value and 24.4% positive CMT reaction. 2. One hendred and seventy four (39.2%) from 82 cattle (73.9%) were found to infected with mastitis. It was found that 8(1.8%0 of the infected quarters were clinical mastitis and all of the rest were subclinical mastitis. 3. The main causative agents were found to Staphylococcus aureus (63 quarters), Streptococcus agalactiae (56 quarters), non-Str. agalactiae streptococci (54 querters), Escherichia coli (19 quaters), the actual total number of quarters detected as mastitis would be 174, as 18 of these quarters showed multiple infection with two different organisms. 4. Having examined the number of infection quarter per head of mastitis in dairy cattle sampling, major finding were that the average number of infection quarters to total dairy cattle exemined was 1.57 quarters, and that of the infected cattle was 2.1 quarters. Infected quarters in cattle with 1, 2, 3 and 4 were noted 27(32.9%), 28(34.1%), 17(20.7%), and 10(12.3%), respectively.

정부회계와 기업회계의 비교분석

曺延煥,李明坤 慶北大學校 1992 論文集 Vol.52 No.-

This paper attempts to analyze and synthesize the numerous differences that have evolved over the years between the governmental accounting and the financial accounting. A chronological approach is used to extricate the divergence between the governmental and the financial accounting practices, concepts, and statements. The comparatively analyzed conceptual differences include revenued and expenses or expenditure, assets, liabilities, going-concern assumptions, matching of revenues and expenses, accounting entities, and budgetary controls. Based on these analysis, this paper suggests ways for improving Korean governmental accounting system. These suggestions include the establishment of the governmental accounting standards through the political process of collecting interest group and external expert opinions, the adoption of the modified accrual basis through the double entry bookkeeping, the preparation of the combined financial statements integrating every funds.

크세논 램프에 노출된 복합레진의 색조변화

조영곤,서정일,김수미,정진호,이영곤 大韓齒科保存學會 2003 Restorative Dentistry & Endodontics Vol.28 No.3

The purpose of this study was to evaluate the color changes of the composite resin resulting from xenon lamp exposure in different environments. Composite resin (Z 250 ; shade A1, A2, A3.5 and A4) were applied in a cylindrical metal mold. Seventy five specimens according to environments of exposure were made as follows; Group Ⅰ : aluminum foiling of the specimens in the air at 37℃ for 1 day and 7 days. Group Ⅱ : exposure of xenon lamp to the specimens in the air at 37℃ for 1 day and 7 days. Group Ⅲ : exposure of xenon lamp to the specimens in distilled water at 37℃ for 1 day and 7 days. The color characteristics (L^*, a^*, b^*) of the specimens before and after exposure of xenon lamp were measured by spectrophotometer and the total color differences (ΔE^*) were computed. The results obtained were as follows: 1. In all groups except A1 shade of group Ⅲ, the ΔE^* values presented below 2.0, and group Ⅲ showed the highest ΔE^* values followed by group Ⅱ and group Ⅰ in a decreasing order(p<0.05). 2. In all shades and groups, the more the exposure time of xenon lamp and the lighter the shade were, the higher the tendency for discoloration(p<0.05). 3. The composite resins which was exposed to xenon lamp in the distilled water was more discolored than those in the air (p<0.05). 4. The major changes of composite resins which were exposed to xenon lamp in the air were an increase in yellowness through a positive shift of the b^* value, and those in the distilled water were an increase in darkness and yellowness through a negative shift of the L^* value and a positive shift of the b^* value.

상아질 접착제의 전단결합강도와 미세누출에 관한 연구

김정호,조영곤,문주훈 大韓齒科保存學會 1997 Restorative Dentistry & Endodontics Vol.22 No.2

New bonding agent systems have been supplied which operators can simply apply to conditioned tooth surfaces. The purpose of this study was to evaluate the shear bond strengths and the microleakages of three bonding agents and composite resins to dentin. Seventy-five extracted human maxillary and mandibular molar teeth were used in this study. For the shear bond strength test, the entire occlusal dentin surfaces of thirty teeth were exposed with Diamond Wheel Saw and smoothed with Lapping and Polishing Machine (South Bay Technology Co., U.S.A.). For the microleakage test, Class V cavities were prepared in the buccal surfaces of fourty-five teeth. They were randomly assigned into 3 groups according to dentin bonding agents (Scotchbond^TM Multi-Purpose plus, ONE-STEP^TM and Prime & Bond^TM) and composite resins (Z-100, Aelitefil^TM and TPH Spectrum^TM) to be used. Bonding agents and composite resins were bonded to exposed dentin surfaces of the tooth crown and to Class V cavities on the buccal surfaces respectively according o manufacturer's directions. The shear bond strengths were measured by universal testing machine(U^TM AGS-100, Japan). In addition, the degree of microleakage at the occlusal and gingival margin was examined by 2% methylene blue and stereomicroscope(Olymous SZH 10, Japan). The results were as follows: 1. The shear bond strength to dentin was the highest value in SBMP-Plus group(16.68±7.38MPa) and the lowest value in Prime & Bond group(11.61±5.82MPa), but there was no significant difference of shear bond strength among three groups. 2. The degree of microleakage at both occlusal and gingival margin was showed the lowest in SBMP-Plus group and the highest in ONE-STEP group. 3. At both occlusal and gingival margin, there was significant difference of microleakage between SBMP-Plus and ONE-STEP/Prime & Bond groups(p<0.05), but no significant difference of microleakage between ONE-STEP and Prim & Bond group(p>0.05).

복합레진 표면의 연마방법에 따른 표면조도

민정범,조공철,조영곤 대한치과보존학회 2007 Restorative Dentistry & Endodontics Vol.32 No.2

본 연구는 복합레진의 종류와 연마방법, 복합레진 연마 후 레진전색제의 적용이 복합레진의 표면조도에 미치는 영향을 알아보기 위하여 복합레진의 표면조도 측정과 FE-SEM 관찰을 통하여 상호 비교하였다. 미세입자형과 nanofill 복합레진을 이용하여 8×3×2 mm의 시편을 각각 100개씩 제작하였고, 연마방법과 레진전색제의 적용 유무에 따라 20개의 군으로 분류하였다. 복합레진의 종류에 따라 Micronew를 사용한 군은 M군, Filtek Supreme을 사용한 군은 S군으로 분류한 후, 연마방법에 따라 M1군과 S1군은 polyester strip만을 사용한 군, M2군 와 S2군은 Sof-Lex disc를 사용한 군, M3군과 S3군은 Enhance disc와 polishing paste를 사용한 군, M4군과 S4군은 Astropol disc를 사용한 군, M5군과 S5군은 carbide finishing bur를 사용한 군으로 다시 분류하였다. 또한 연마 후 Biscover 레진전색제를 적용한 군은 연마방법에 따른 각 군에 B를 추가하여 M1B군-M5B군 및 S1B군-S5B군으로 분류하였다. 제작된 모든 시편은 표면조도의 측정과 주사전자 현미경 관찰을 시행하기 전에 실온의 증류수에서 24시간 동안 보관 하였다. 표면조도측정기를 사용하여 각 시편의 상면과 하면 모두에서 각각 5회씩 측정하여 평균 표면조도 값을 산출하여 통계적으로 분석하였으며, 각 군에서 대표적인 시편 1개를 선택하여 FE-SEM에서 관찰하여 다음과 같은 결과를 얻었다. 1. 복합레진의 표면조도 값은 polyester strip에 의해 형성된 모든 군에서 가장 낮게 나타났고, 레진전색제를 적용한 S군을 제외한 다른 모든 군에서 finishing bur로 연마한 군이 가장 높게 나타났다 (p < 0.05). FE-SEM 관찰에서 레진전색제를 적용하기 전의 표면은 polyester strip을 사용한 M1군과 S1군이 가장 평활한 표면을 나타냈고, finishing bur를 사용한 M5군과 S5군은 필러의 탈락에 의해 형성된 여러 개의 기포와 함께 울퉁불퉁한 표면을 보였다. 2. 복합레진의 종류에 따른 표면조도는 레진전색제를 적용하기 전에는 통계학적으로 차이를 나타내지 않았으나, 레진전색제를 적용한 후에는 Micronew가 Filtek Supreme보다 평활한 표면을 나타내었다 (p < 0.05). 3. 레진전색제를 적용하기 전에는 복합레진의 종류와 연마방법에 따른 표면조도 간에 상호 연관성이 있었으나, 레진전색제를 적용한 후에는 복합레진의 종류와 연마방법 간에 상호 연관성이 없었다. FE-SEM 관찰에서 레진전색제를 적용한 후의 표면은 모든 군에서 대체적으로 평활한 표면을 나타내었다. 4. 동일한 복합레진과 연마방법으로 처리된 군에서 레진전색제 적용 전과 후의 표면조도 값은 M1B군이 M1군보다, S1B군이 S1군보다 통계학적으로 높게 나타났으며, M4B군과 M5B군은 각각 M4군과 M5군 보다, 그리고 S5B군은 S5군 보다 통계학적으로 낮게 나타났다 (p < 0.05). 본 연구를 종합하여 보면, 복합레진의 종류에 따라 표면조도의 순서는 다르게 나타났고, polyester strip 하에서 복합레진이 중합된 경우 가장 낮은 표면조도 값과 평활한 표면을 제공하였으며 전반적으로 finishing bur는 가장 높은 Ra 값과 거친 표면을 제공하였다. Enhance, Astropol, carbide finishing bur로 연마한 표면은 레진전색제의 사용으로 평활한 표면을 얻을 수 있었지만, polyester strip과 Sof-Lex disc로 얻어진 표면은 레진전색제의 사용으로 표면조도의 개선이 이루어지지 않았다. The purpose of this study was to evaluate the difference of surface roughness of composite resin according to composite resin type, polishing methods, and use of resin sealant. Two hundred rectangular specimens, sized 8 × 3 × 2 mm, were made of Micro-new (Bisco, Inc., Schaumburg, IL, U.S.A) and Filtek Supreme (3M ESPE Dental Products, St. Paul, MN, U.S.A.), and divided into two groups; Micronew-M group, Filtek Supreme-S group. Specimens for each composite group were subdivided into five groups by finishing and polishing instruments used; M1 & S1 (polyester strip), M2 & S2 (Sof-Lex disc), M3 & S3 (Enhance disc and polishing paste), M4 & S4 (Astropol), and M5 & S5 (finishing bur). Polished groups were added letter B after the application of resin surface sealant (Biscover), eg, M1B and S1B. After specimens were stored with distilled water for 24 hr, average surface roughness (Ra) was taken using a surface roughness tester. Representative specimens of each group were examined by FE-SEM (S-4700: Hitachi High Technologies Co., Tokyo, Japan). The data were analysed using paired t-test, ANOVA and Duncan's tests at the 0.05 probability level. The results of this study were as follows; 1. The lowest Ra was achieved in all groups using polyester strip and the highest Ra was achieved in M5, S5 and M5B groups using finishing bur. On FE-SEM, M1 and S1 groups provided the smoothest surfaces, M5 and S5 groups were presented the roughest surfaces and voids by debonding of filler on the polished specimens. 2. There was no significant difference in Ra between Micronew and Filtek Supreme before the application of resin sealant, but Micronew was smoother than Filek Supreme after the application of resin sealant. 3. There was significant corelation between Ra of type of composite resin and polishing methods before the application of resin sealant (p = 0.000), but no significant interaction between them after the application of resin sealant. On FE-SEM, most of composite resin surfaces were smooth after the application of resin sealant on the polished specimens. 4. Compared with before and after the application of resin sealant in group treated in the same composite and polishing methods, Ra of M4B and M5B was statistically lower than that of M4 and M5, and S5B was lower than that of S5, respectively (p < 0.05). In conclusion, surface roughness by polishing instruments was different according to type of composite resin. Overall, polyester strip produced the smoothest surface, but finishing bur produced the roughest surface. Application of resin sealant provided the smooth surfaces in specimens polished with Enhance, Astropol and finishing bur, but not provided them in specimens polished with Sof-Lex disc.

태권도 선수와 유도 선수의 경쟁불안이 경기 수행에 미치는 영향

전정우,조성균 한국스포츠리서치 2004 한국 스포츠 리서치 Vol.15 No.6

This research was designed to supply descriptive basic data for middle school Taekwondo and Judo players' psychological. status and to investigate influences of competition uneasiness prior to game. The results of research are as follows: The positive correlation efficient appeared to be existed between competition uneasiness and game achievement. In the competition uneasiness, Judo players' estimation level appeared higher, whereas Taekwondo players in game achievement. Woman appeared higher than man in competition uneasiness factor, and man appeared comparatively higher than woman about physical game achievement. In conclusion, players involving in game that could end anytime showed relatively higher competition uneasiness than the players of game that last in regulated period of time such as Taekwondo game.

乳房炎 乳汁에서 分離된 原因菌의 抗菌劑 感受性

崔民淳,金鍾冕,趙正坤,蔡孝錫,姜明大,宋熹鍾 全北大學校 附設 畜産開發硏究所 1987 畜産開發硏究報告 Vol.1 No.-

A total of 189 strains (Streptococcus agalactiae and non-Streptococcus agalactiae 110, Staphylococcus aureus 63, and E. coli 16) isolated from bovine mastitie milk samples by "The Connecticut Mastitis Control Program" in dairy herds were examined for drug susceptibility to 8 drugs and analysed the rate of multiple resistant patterns. 1. All of the isolates were resistant to antimicrobial agents such as penicillin (PC), streptomycin (SM), kanamycin(KM), carbenicillin (CA), lincomycin (LM), gentamicin (GM), and tetracycline (TC), singly or multiply. The isolates were more susceptible to CA (84.1%),PC (78.9%), and SM (78.4%) than the the other drugs such as GM (51.8%), KM (48.7%), TC (19.6%) and LM (19.0%) in order. 2. The multiple resistant isolates (96.3%) were more than those of singly resistant isolates (3.7%) and 58 different drug resistant patterns were observed. Among 7 singly resistant isolates, CP was the commonest. While among 182 multiple resistant isolates, CP-KM-LM-TC-GM, CP-LM-TC, CP-LM-TC-GM, PC-CP-SM-LM-TC-GM, CP-KM-LM-TC, and CP-LM patterns were frequently encounted. 3. The strains of streptococcus spp. were more susceptible to CA (90.1%) and SM (82.9%) than the other drugs such as KM (43.2%), GM (38.7%), LM (13.5%), CP (10.8%) and TC (10.8%). Among them CP-KM-LM-TC-CM pattern was frequently encounted. 4. The strains of Sta. aureus were more susceptible to PC (74.6%),CA (69.8%), SM (65.1%) and GM (63.5%) than the other drugs such as KM (46.0%), CP (22.2%), TC (15.9%) and LM (9.5%). Among them CP-LM-TC pattern was commonly encounted. 5. The strains of E. coli were more susceptible to CA (100%) and KM (75.0%) tnan TC (9.5%). But the other drugs such as PC, SM, GM, CP and LM were not. Among them PC-CP-SM-LM-TC-GM pattern was commonly encounted.

자동차용 실리콘 가속도센서의 개발(Ⅱ)

이종현,신장규,이상룡,천희곤,조찬섭,심준환,류인식,박석홍,허정준,박기열 경북대학교 센서기술연구소 1994 연차보고서 Vol.1994 No.-

자동차의 air-bag 장치에 실용될 수 있는 압저항형 단결정 실리콘 가속도센서 칩을 개발하기 위하여 결정 실리콘 미세구조의 제조방법을 확립하고, 단위공정의 검증을 통하여 일괄공정에 의한 PROTO-TYPE 칩을 만드는 기술을 연구하였다. 단결정 실리콘 미세구조는 선택확산법을 이용하여 정확히 선택된 영역에만 air-gap을 형성하여 미세구조의 측면식각을 방지하는 선택확산법에 의한 실리콘 마이크로머시닝 기술로 제조하였다. 일괄공정을 위한 단위공정확립을 위하여 PROTY-TYPE 8빔 브릿지형 가속도 센서를 제조하였다. 제조된 칩의 가속도에 따른 출력전압은 선형성을 나타내고 있으며, 감도는 약 50 ㎶/V·g로 나타났다. 이 감도는 50G용 가속도센서의 사양을 만족하지 못했다. 이는 공정에 의한 문제라기 보다는 가속도센서의 시뮬레이션에 의해 설계한 구조가 이미 원하는 감도에 못 미친다는 것으로 생각된다. 따라서 2차 공정으로 제조될 가속도센서의 파라미터를 SuperSAP 유한요소 패키지를 이용하여 실리콘 미세구조부의 파라미터에 따른 특성을 시뮬레이션하였다. 설계된 50G용 가속도센서의 mass Pad의 반경 및 빔 길이, 빔 폭, 빔 두께, 그리고 mass의 각 파라미터 값은 700 ㎛, 120 ㎛, 5 ㎛, 1.0 ㎎ 이었다. 반도체 공정기술, 관성질량 제조법 및 선택확산을 이용한 마이크로머시닝을 사용하여 일괄공정으로 8빔 브린지형 가속도센서를 제조하였다. We researched the establishment of the silicon microstructure fabrication technique to develop a piezoresistive type silicon acceleration sensor chip and the technique to make a proto-type chip by the verification of the unit-process. Silicon microstructure is fabricated silicon micro-machining by selective diffusion method. This method prevent a side-etching of microstructure because selective diffused region is only formed an air-gap. We fabricated a proto-type 8-beam bridge-type acceleration sensor to establish the unit-process for the batch-process. The output voltage of the chip represented linearity with acceleration, and the sensitivity was about 50 ㎶/V·g. But this sensitivity dosen't satisfy the requirements of a practical acceleration sensor. The cause of this result is assumed not process problem, but the structure designed by simulation isn't suitable already. Threfore, the characteristics of parameters of the acceleration sensor that will be fabricated by 2nd-process is simulated by SuperSAP finite-element package. The determined parameter values of beam length, beam width, beam thickness, mass, and mass radius are 120 ㎛, 5 ㎛, 1.0 ㎎, and 700 ㎛, respectively. We fabricated 8-beam bridge-type acceleration sensor by batch-process using a semiconductor process technique, proof-mass fabrication method, and micromachinig using selective diffusion.

Acute phase proteins in dairy cows with mastitis

Cho, Jeong-Gon The Korean Society of Veterinary Service 2002 韓國家畜衛生學會誌 Vol.25 No.4

In this study, to assess the diagnostic value for mastitis in dairy cows, change of acute phase proteins(haptoglobin and serum amyloid A) concentrations in milk and sera of dairy cows were measured. 50 dairy cows were used in this experiment and divided into two groups. The first group was the healthy dairy cow group whose milk contained less than 2.0${\times}$10$\^$5/ somatic cell counts(n=5). The second group was the mastitis-dairy cow group whose milk counted higher than 5.0${\times}$10$\^$5/ somatic cell counts(n=45). The concentration of haptoglobin and serum amyloid A in milk and sera from these two groups were determined by Tridelta range haptoglobin kit and serum amyloid A kit. The concentration of haptoglobin in the milk from first group was undetectable value and that of the second group was 124.0$\mu\textrm{g}$/$m\ell$. And the concentration of haptoglobin in serum of the first group was 32.0$\mu\textrm{g}$/$m\ell$ and that of the second group was 214.4$\mu\textrm{g}$/$m\ell$. The concentration of serum amyloid A in the milk from first group was 0.32$\mu\textrm{g}$/$m\ell$ and that of the second group was 17.7$\mu\textrm{g}$/$m\ell$. And the concentration of serum amyloid A in serum of the first group was 5.1$\mu\textrm{g}$/$m\ell$ and that of the second group was 25.8$\mu\textrm{g}$/$m\ell$. It was concluded that concentration of haptoglobin and serum amyoid A in milk and serum may be was to discriminate between normal and mastitic milks.

Acute phase proteins in dairy cows with mastitis

( Jeong Gon Cho ) 한국가축위생학회 2002 韓國家畜衛生學會誌 Vol.25 No.4

In this study, to assess the diagnostic value for mastitis in dairy cows, change of acute phase proteins(haptoglobin and serum amyloid A) concentrations in milk and sera of dairy cows were measured. 50 dairy cows were used in this experiment and divided into two groups. The first group was the healthy dairy cow group whose milk contained less than 2.0×l0(5) somatic cell counts(n=5). The second group was the mastitis-dairy cow group whose milk counted higher than 5.0×10(5) somatic cell counts(n=45). The concentration of haptoglobin and serum amyloid A in milk and sera from these two groups were determined by Tridelta range haptoglobin kit and serum amyloid A kit. The concentration of haptoglobin in the milk from first group was undetectable value and that of the second group was 124.0㎍/㎖. And the concentration of haptoglobin in serum of the first group was 32.0㎍/㎖ and that of the second group was 214.4㎍/㎖. The concentration of serum amyloid A in the milk from first group was 0.32㎍/㎖ and that of the second group was l7.7㎍/㎖. And the concentration of serum amyloid A in serum of the first group was 5.l㎍/㎖ and that of the second group was 25.8㎍/㎖. It was concluded that concentration of haptoglohin and serum amyoid A in milk and serum may he was to discriminate between normal and mastitic milks.