Micro-scale PLA Fibrous Membranes for Adsorption of Cigarette Smoke

Yi-qing Gu,Zhe Wang,Ying Sun,Yi-Kai Wang,Zhi-juan Pan 한국섬유공학회 2018 Fibers and polymers Vol.19 No.3

Porous PLA fibrous membranes with different morphologies were successfully fabricated by varying the relative humidity. When the relative humidity was higher than 45 %, nanopores morphology appeared on the surface of PLA fibers. The micro-structures of PLA fibers and the packing densities and through-pore sizes of the PLA fibrous membranes were measured and found to greatly influence the smoke adsorption properties. The smoke adsorption was recorded in photos, and the process of how smoke adsorbed on the membranes was observed by SEM. The max removal efficiencies of nicotine, tar, water vapor, and carbon monoxide were 40.0 %, 36.9 %, 5.8 % and 13.6 % measured by a cigarette-smoking machine, and sensory evaluation was conducted to assess the practical application of fibrous membranes for smoke adsorption.

Notch1 promotes the pericytemyofibroblast transition in idiopathic pulmonary fibrosis through the PDGFR/ ROCK1 signal pathway

Yi-Chun Wang,Qiong Chen,Jun-Ming Luo,Jing Nie,Qing-He Meng,Wei Shuai,Han Xie,Jia-Mei Xia,Hui Wang 생화학분자생물학회 2019 Experimental and molecular medicine Vol.51 No.-

The goals of this study were to investigate the role of the Notch1/PDGFRβ/ROCK1 signaling pathway in the pathogenesis of pulmonary fibrosis and to explore the possibility of treating fibrosis by targeting Notch1. Lung tissues from patients with pulmonary fibrosis were examined for the expression of Notch1/PDGFRβ/ROCK1 using RT-qPCR, western blotting, and immunostaining. Cultured mouse lung pericytes were transfected with Notch1-overexpressed vectors or shRNA targeting PDGFRβ/ROCK1 to examine cell behaviors, including proliferation, cell cycle arrest, and differentiation toward myofibroblasts. Finally, a mouse pulmonary fibrosis model was prepared, and a Notch1 inhibitor was administered to observe tissue morphology and pericyte cell behaviors. Human pulmonary fibrotic tissues presented with overexpression of Notch1, PDGFRβ, and ROCK1, in addition to a prominent transition of pericytes into myofibroblasts. In cultured mouse lung pericytes, overexpression of Notch1 led to the accelerated proliferation and differentiation of cells, and it also increased the expression of the PDGFRβ and ROCK1 proteins. The knockdown of PDGFRβ/ROCK1 in pericytes remarkably suppressed pericyte proliferation and differentiation. As further substantiation, the administration of a Notch1 inhibitor in a mouse model of lung fibrosis inhibited the PDGFRβ/ROCK1 pathway, suppressed pericyte proliferation and differentiation, and alleviated the severity of fibrosis. Our results showed that the Notch1 signaling pathway was aberrantly activated in pulmonary fibrosis, and this pathway may facilitate disease progression via mediating pericyte proliferation and differentiation. The inhibition of the Notch1 pathway may provide one promising treatment strategy for pulmonary fibrosis.

FUNCTIONALLY GRADED EPOXY COMPOSITES USING SILANE COUPLING AGENT FUNCTIONALIZED MULTIWALLED CARBON NANOTUBES

YI WANG,TOSHIAKI NATSUKI,QING-QING NI,YAOFENG ZHU 성균관대학교(자연과학캠퍼스) 성균나노과학기술원 2014 NANO Vol.9 No.1

Functionally graded multiwalled carbon nanotube (MWCNT) reinforced epoxy matrix compo-sites are fabricated using a centrifugal method. Aggregation of the MWCNTs during the epoxycuring process is prevented using a two-step aminosilane modifcation. Chemical interaction ofthe silane with the oxidized nanotube surface is con¯rmed using Fourier transform infraredspectroscopy and X-ray photoelectron spectroscopy. Raman spectroscopy of acid-treatedMWCNTs corroborates the formation of surface defects owing to the introduction of carboxylgroups. The mechanical and microwave absorption property gradients of the composites correfspond with those produced via silane modifcation indicating potential application to microwaveabsorbing materials. The MWCNTs are better dispersed in the epoxy resin after the modi¯cation,making it possible for them to become e±ciently graded in the epoxy matrix. We therefore show that it is possible to fabricate functionally graded nano¯ller-reinforced materials using thecentrifugal method by modifying the surface of the nanofller.

Increased accumulation of anthocyanins in transgenic potato tubers by overexpressing the 3GT gene

Qing Wei,Qing Yang,Quan-Yi Wang,Zhi-Hang Feng,Bing Wang,Yun-Feng Zhang 한국식물생명공학회 2012 Plant biotechnology reports Vol.6 No.1

In order to explore a biotechnological method for improving potato tuber color and creating plants with increased anthocyanin contents, a potato UDP-glucose: flavonoid-3-O-glucosyltransferase (3GT) gene was inserted behind the GBSSI promoter of pBin19, and this construct was introduced into Solanum tuberosum L. cultivar De´sire´e plants by Agrobacterium-mediated transformation. Six independent transgenic lines overexpressing the 3GT gene were identified by PCR and Southern blot analysis from 18 kanamycin-resistant plants. Due to the expression of 3GT gene, the tuber color and the anthocyanin content were enhanced noticeably in the transgenic plants compared to the wild-type control plants. This result suggests that the 3GT gene can potentially be used to improve potato color and enhance levels of antioxidants in the diet.

Automatic Detection and Classification of Rib Fractures on Thoracic CT Using Convolutional Neural Network: Accuracy and Feasibility

Zhou Qing-Qing,Wang Jiashuo,Tang Wen,Hu Zhang-Chun,Xia Zi-Yi,Xue-Song Li,Zhang Rongguo,Yin Xindao,Zhang Bing,Zhang Hong 대한영상의학회 2020 Korean Journal of Radiology Vol.21 No.7

Objective: To evaluate the performance of a convolutional neural network (CNN) model that can automatically detect and classify rib fractures, and output structured reports from computed tomography (CT) images. Materials and Methods: This study included 1079 patients (median age, 55 years; men, 718) from three hospitals, between January 2011 and January 2019, who were divided into a monocentric training set (n = 876; median age, 55 years; men, 582), five multicenter/multiparameter validation sets (n = 173; median age, 59 years; men, 118) with different slice thicknesses and image pixels, and a normal control set (n = 30; median age, 53 years; men, 18). Three classifications (fresh, healing, and old fracture) combined with fracture location (corresponding CT layers) were detected automatically and delivered in a structured report. Precision, recall, and F1-score were selected as metrics to measure the optimum CNN model. Detection/diagnosis time, precision, and sensitivity were employed to compare the diagnostic efficiency of the structured report and that of experienced radiologists. Results: A total of 25054 annotations (fresh fracture, 10089; healing fracture, 10922; old fracture, 4043) were labelled for training (18584) and validation (6470). The detection efficiency was higher for fresh fractures and healing fractures than for old fractures (F1-scores, 0.849, 0.856, 0.770, respectively, p = 0.023 for each), and the robustness of the model was good in the five multicenter/multiparameter validation sets (all mean F1-scores > 0.8 except validation set 5 [512 x 512 pixels; F1-score = 0.757]). The precision of the five radiologists improved from 80.3% to 91.1%, and the sensitivity increased from 62.4% to 86.3% with artificial intelligence-assisted diagnosis. On average, the diagnosis time of the radiologists was reduced by 73.9 seconds. Conclusion: Our CNN model for automatic rib fracture detection could assist radiologists in improving diagnostic efficiency, reducing diagnosis time and radiologists’ workload.

A Comparative Study of Camouflage Printing Color Matching Based on Monitor and Paper Card

Yu-wen Wang,Qing-zhu Yi,Yi Ding,Guang-xin Wu,Jing-bin Zhang,Ni Wang 한국섬유공학회 2021 Fibers and polymers Vol.22 No.4

To improve the accuracy of color reproduction for camouflage printing, a new color matching method, namedmonitor-paper-fabric, was proposed by importing color management into textiles, which matched the printing pastesaccording to the color of the paper card printed by the ink-jet printer after color management. Not like the traditional colormatching method, it matched the printing pastes according to the color from computer monitor after color correction. Twocolor matching methods were analyzed by comparing the color difference. It was found that the “monitor-paper-fabric” colormatching method could be considered as a convenient and feasible color matching method. Most color differences betweenthe monitor and the fabric in the camouflage pattern were reduced to lower than 4, except for color blocks 5 and 6. Inaddition, the color differences of six color blocks between the paper and the fabric were all less than 3.5, and were lower thanthose between the monitor and the fabric. The color consistency between the paper and the fabric was better than thatbetween the monitor and the fabric.

No Association Between the USP7 Gene Polymorphisms and Colorectal Cancer in the Chinese Han Population

Li, Xin,Wang, Yang,Li, Xing-Wang,Liu, Bao-Cheng,Zhao, Qing-Zhu,Li, Wei-Dong,Chen, Shi-Qing,Huang, Xiao-Ye,Yang, Feng-Ping,Wang, Quan,Wang, Jin-Fen,Xiao, Yan-Zeng,Xu, Yi-Feng,Feng, Guo-Yin,Peng, Zhi-Ha Asian Pacific Journal of Cancer Prevention 2012 Asian Pacific journal of cancer prevention Vol.13 No.5

Colorectal cancer (CRC), now the third most common cancer across the world, is known to aggregate in families. USP7 is a very important protein with an important role in regulating the p53 pathway, which is critical for genomic stability and tumor suppression. We here genotyped eight SNPs within the USP7 gene and conducted a case-control study in 312 CRC patients and 270 healthy subjects in the Chinese Han population. No significant associations were found for any single SNP and CRC risk. Our data eliminate USP7 as a potential candidate gene towards for CRC in the Han Chinese population.

Prognostic Role of Hepatoma-derived Growth Factor in Solid Tumors of Eastern Asia: a Systematic Review and Meta-Analysis

Bao, Ci-Hang,Liu, Kun,Wang, Xin-Tong,Ma, Wei,Wang, Jian-Bo,Wang, Cong,Jia, Yi-Bin,Wang, Na-Na,Tan, Bing-Xu,Song, Qing-Xu,Cheng, Yu-Feng Asian Pacific Journal of Cancer Prevention 2015 Asian Pacific journal of cancer prevention Vol.16 No.5

Hepatoma-derived growth factor (HDGF) is a novel jack-of-all-trades in cancer. Here we quantify the prognostic impact of this biomarker and assess how consistent is its expression in solid tumors. A comprehensive search strategy was used to search relevant literature updated on October 3, 2014 in PubMed, EMBASE and WEB of Science. Correlations between HDGF expression and clinicopathological features or cancer prognosis was analyzed. All pooled HRs or ORs were derived from random-effects models. Twenty-six studies, primarily in Eastern Asia, covering 2,803 patients were included in the analysis, all of them published during the past decade. We found that HDGF overexpression was significantly associated with overall survival (OS) ($HR_{OS}=2.35$, 95%CI=2.04-2.71, p<0.001) and disease free survival (DFS) ($HR_{DFS}=2.25$, 95%CI =1.81-2.79, p<0.001) in solid tumors, especially in non-small cell lung cancer, hepatocellular carcinoma and cholangiocarcinoma (CCA). Moreover, multivariate survival analysis showed that HDGF overexpression was an independent predictor of poor prognosis ($HR_{OS}=2.41$, 95%CI: 2.02-2.81, p<0.001; $HR_{DFS}=2.39$, 95%CI: 1.77-3.24, p<0.001). In addition, HDGF overexpression was significantly associated with tumor category (T3-4 versus T1-2, OR=2.12, 95%CI: 1.17-3.83, p=0.013) and lymph node status (N+ versus N-, OR=2.37, 95%CI: 1.31-4.29, p=0.03) in CCA. This study provides a comprehensive examination of the literature available on the association of HDGF overexpression with OS, DFS and some clinicopathological features in solid tumors. Meta-analysis results provide evidence that HDGF may be a new indicator of poor cancer prognosis. Considering the limitations of the eligible studies, other large-scale prospective trials must be conducted to clarify the prognostic value of HDGF in predicting cancer survival.

A vision-based system for long-distance remote monitoring of dynamic displacement: experimental verification on a supertall structure

Yi-Qing Ni,You-Wu Wang,Wei-Yang Liao,Wei-Huan Chen 국제구조공학회 2019 Smart Structures and Systems, An International Jou Vol.24 No.6

Dynamic displacement response of civil structures is an important index for in-construction and in-service structural condition assessment. However, accurately measuring the displacement of large-scale civil structures such as high-rise buildings still remains as a challenging task. In order to cope with this problem, a vision-based system with the use of industrial digital camera and image processing has been developed for long-distance, remote, and real-time monitoring of dynamic displacement of supertall structures. Instead of acquiring image signals, the proposed system traces only the coordinates of the target points, therefore enabling real-time monitoring and display of displacement responses in a relatively high sampling rate. This study addresses the in-situ experimental verification of the developed vision-based system on the Canton Tower of 600 m high. To facilitate the verification, a GPS system is used to calibrate/verify the structural displacement responses measured by the vision-based system. Meanwhile, an accelerometer deployed in the vicinity of the target point also provides frequency-domain information for comparison. Special attention has been given on understanding the influence of the surrounding light on the monitoring results. For this purpose, the experimental tests are conducted in daytime and nighttime through placing the vision-based system outside the tower (in a brilliant environment) and inside the tower (in a dark environment), respectively. The results indicate that the displacement response time histories monitored by the vision-based system not only match well with those acquired by the GPS receiver, but also have higher fidelity and are less noise-corrupted. In addition, the low-order modal frequencies of the building identified with use of the data obtained from the vision-based system are all in good agreement with those obtained from the accelerometer, the GPS receiver and an elaborate finite element model. Especially, the vision-based system placed at the bottom of the enclosed elevator shaft offers better monitoring data compared with the system placed outside the tower. Based on a wavelet filtering technique, the displacement response time histories obtained by the vision-based system are easily decomposed into two parts: a quasi-static ingredient primarily resulting from temperature variation and a dynamic component mainly caused by fluctuating wind load.

Inverter Power Monitoring System Based on VRML Virtual Reality Technology

Qing-yun Dai,Jin-dou Wang,Rui-Tao Liu,Jun-hong Cheng,Yi li,Wei-yang Wu 보안공학연구지원센터 2013 International Journal of Smart Home Vol.7 No.5