Kim,Seong-soo : Possiblity of Low Salting Process in Gae-Woo Jeot(Salted and Fermented Gastrophoda) and Changes in Fatty Acid Composition during Fermntation 低鹽化 可能性 檢討 및 熱成중 脂肪酸 組成의 變化

姜永周,河璡桓,金永東,宋大鎭,金洙賢,金成洙 제주대학교 1990 논문집 Vol.30 No.-

To establish the way of processing of Gae-Woo jeot which used abalone intestine that has not been systematically used compare to its characteristic taste and fame as main ingredient and to develop as a local tourist good, the change of constituents the quality of salted fish products suring Gae-Woo jeot fermentation were examined. The results are as follows. 1. In the organoleptic test, Gae-Woo jeot which fermented through 65 days were dominant and the group of 105 salkt concentration were better than that of 20%. It was the best of 10% salted products to add small abalone. Both law salted(10%) and high salted (20%) Gae-Woo jeot were similar in general constityents, nutrients and texture. 2. Compositions of highly unsaturated acid were farely high to 45.6% and 46.1% in small abalone added froup and top sheel added group respectively. during 3 months fermentation low decreasing rate of 3~4% was shown. EPA(eicosapentaenoic acid) was approximately 7~8% and DHA(docosahexaenoic acid) was extremely low to be less than 0.3%. 3. In the changes General composition and pH, pH was within range of 4~5.5, 9~12% in protein, 3~5% in total sugar, 0.5~1% in lipid and approximately 1% in ash. 4. Gae-Woo jeot can be made with 10% low salting method, and 10% group gets all the better for taste, small abalone adding is recommended. 5. When low salt fermented fish of 10% is processed, it is highly recommended to put sorbitol, ethyl alcohol, lactic acid or other humectant for better taste and longer storage and good quality food additives must be developed for tourist and presently applied mil ordering transportation must be sought.

Effects of dietary supplementation with probiotic CS-A on performance in broiler chickens

Seong Soo Kang1*, Se Eun Kim, Ara Go, Kyung Mi Shim, Chun Sik Bae, Chang Jong Moon, Sung-Ho Kim, Jong-Choon Kim, Jin-Cheol Yoo, Seung Sik Cho 충북대학교 동물의학연구소 2012 Journal of Biomedical and Translational Research Vol.13 No.3

Probiotics, enzymes, organic acids, oligosaccharides, antioxidants, and other functional materials are actively being explored as alternatives to antibiotics. Probiotics include live beneficial microorganisms that colonize the intestinal tract and competitively inhibit attachment and growth of harmful microbes. Probiotics also increase feed efficiency by assisting in nutrient absorption and digestion. The current study was conducted in order to evaluate the effect of a new probiotic, CS-A, as a dietary supplement of a fermented product on growth performance, feed intake, and feed conversion efficiency in broiler chickens, and to evaluate its value as an alternative for antibiotics used as a feed additive. Antibacterial and anti-inflammatory effects of CS-A were investigated in vitro and the in vivo effects of a constant concentration of supplemented CS-A on growth rate and feed efficiency were evaluated. In addition, the safety of CS-A was assessed by examination of common symptoms and mortality. Determination of minimal inhibitory concentration revealed an excellent antibacterial effect of CS-A. Cytotoxicity was low and anti-inflammatory effects were achieved at the effective concentration of CS-A. Supplementation with 0.1% CS-A resulted in a feed efficiency score of 1.84 in broilers, compared to 2.00 in the control group. There were no adverse clinical findings, necropsy findings, hematology, and altered serum biochemistry parameters, and no mortality. Thus, it is concluded that CS-A is safe and effective as a feed additive.

초임계 이산화탄소를 이용하는 친환경 공정에 의한 다공성 고분자의 제조

강세란,홍성수,이민규,이석희,천재기,주창식 한국환경과학회 2004 한국환경과학회지 Vol.13 No.3

An experimental study on the preparation of monolithic porous polymers by environmentally friend process in supercritical carbon dioxide has been carried out. Polymerization mixture composed of a cross-linking monomer, initiator and functional co-polymer was charged in the reactor with sapphire window. After the system was purged with a flow of CO₂ for 15 min, the reactor was pressurized with liquid CO₂ up to 100 bars. The reactor was isolated from and placed back to the system via quick connector for shaking until the mixture had become fully homogeneous. The reactor was then heated and pressurized to the required reaction conditions and left overnight. After cooling and CO₂ evacuation, the polymer was removed from the reactor as dry, white, continuous monoliths. The effect of experimental conditions on the physical properties of porous polymer was systematically examined, and it was found that monomer content had a major effect on the physical properties of the polymers.

Headed Reinforcement를 사용한 철근콘크리트 깊은 보의 전단거동

강경훈,이우진,김수봉,서수연,윤승조,김성수 대한건축학회 2003 대한건축학회 학술발표대회 논문집 - 계획계/구조계 Vol.23 No.1(구조계)

Generally, headed reinforcement offers several advantages over straight bar or hooked bar anchorages to develop reinforcement in concrete members. The purpose of this study is to investigate the shear behaviors of reinforced concrete deep beam with headed reinforcement. Five deep beam specimens are designed to study the anchorage capacity of headed reinforcement as well as the contribution of H-bar and V-bar to the shear. Two anchorage types, standard 90-degree anchorage and headed reinforcement, are considered in design. From the tests, it is shown that In the test results, headed reinforcement is able to replace standard 90-degree anchorage as the anchorage method. The evaluation on the contribution of H-bar and V-bar in current design code for deep beam shows that the former is overestimated 75% and the latter is overestimated 17%.

블록 암호화를 위한 Blowfish 구현

성해경,박종태,노진수,이강현 조선대학교 에너지.자원신기술연구소 2002 에너지·자원신기술연구소 논문지 Vol.24 No.2

Blowfish is a symmetric block cipher that can be used as a drop-in replacement for DES or IDEA. It takes a variable-length key, from 32bits to 448bits, making it ideal for both domestic and exportable use. In this paper, the Blowfish unit is designed using pipeline architecture and correctly implements the algorithm with a focus on ease-of-design and ease-of-use without sacrificing too much speed or size. For the real time process of Blowfish, it is required that high-speed operation and small size hardware. So, the scheme of new adders designed has all advantages abstracted from other adders. As a result of this new adder designed, area cost increases by 1.05 times but the operation speed increases by 1.2 times.

카올린으로부터 합성된 고순도 알루미나의 γ→α변태에 미치는 Fe₂O₃첨가의 영향

강효경,박성수,박희찬 釜山大學校生産技術硏究所 1997 生産技術硏究所論文集 Vol.53 No.-

국내산 카올린으로부터 알루미늄황산염수화물을 합성하고, 이의 특성 및 열분해에 따른 알루미나의 γ→α변태에 미치는 Fe₂O₃의 첨가효과가 X-선회절분석, 시차열중량분석, 주사전자현미경, 플라즈마분광분석, BET법을 이용하여 검토하였다. 합성된 2 ㎛정도 크기의 판상입자형태로 구성된 고순도 알루미늄황산염은 Al₂(SO₄)₃·18H₂O로 동정되었으며, 이는 150℃ 부근에서의 탈수반응과 750℃부근에서의 탈황산반응을 경유하여 1000℃에서 결정성이 낮은 γ-Al₂O₃로 변화하였고, γ→α변태는 1200℃정도에서 일어났다. 0.1 wt% Fe₂O₃를 첨가한 경우의 1200℃하소물에서 생성된 FeAl₂O₄스피넬은 알루니마의 γ→α변태를 억제시켰으며, 그 이상의 양을 첨가한 경우와 1300℃로의 하소온도를 증가시킨 경우는 FeAl₂O₄의 α-Al₂O₃와 Fe₂O₃로의 분해 및 이온확산속도의 증가로 인하여 α-Al₂O₃생성이 촉진되었다. Aluminum sulfate hydrate has been prepared from the domestic kaolin, and its characteristics and the effect of Fe₂O₃addition on the γ→αtransformation of the resulting alumina have been investigated by means of the XRD, TG/DTA, SEM, plasma spectrometer, and BET methods. The aluminum sulfate having high purity and 2 ㎛-sized plate-like structure particles was identified as a crystalline Al₂(SO₄)₃·18H₂O, and decomposed to γ-Al₂O₃at 1000℃ via dehydration at ∼150℃ and desulfurization at ∼750℃. γ-Al₂O₃transformed to α-Al₂O₃at 1200℃. After calcination of the aluminum sulfate with addition of 0.1 wt% Fe₂O₃at 1200℃, the formation of FeAl₂O₄spinel prohibited the γ→αtransformation of the alumina. However, the addition of > 0.1 wt% Fe₂O₃and the increase in calcination temperature to 1300℃ accelerated the γ→αtransformation, due to the decomposition of FeAl₂O₄to α-Al₂O₃and Fe₂O₃and the velocity of ion diffusion, respectively.

건물 산란계수를 이용한 비가시거리영역에서의 전파환경

강부식,김홍수,홍성욱 濟州大學校工科大學産業技術硏究所 1997 尖端技術硏究所論文集 Vol.8 No.1

In this paper, the scattered electric fields is computed to predict the shielding zone by analysing the effect of the reflected azimuth anlge at the building, and considering the path differences at observation point between the rays from origin and any point in the building. The scattering coefficients, which are applicable to the prediction of shielding zone, are computed and compared with measured one. We found that the scattering power become weak over 10 degree of the azimuth angle at which the scattering coefficient is lower than 40 dB. From this. the shielding zone can be estimated.

혈관모세포종의 임상 분석

김은성,강삼석,이정길,김태선,정신,김재휴,김수한,이제혁 대한신경외과학회 1998 Journal of Korean neurosurgical society Vol.27 No.5

레이저 간섭법을 이용한 잔류응력 측정 방법에 대한 연구

강영준,홍성진,강형수,노경완 韓國非破壞檢査學會 1999 한국비파괴검사학회지 Vol.19 No.1

잔류응력은 공학적 구조물에 결함을 야기하는 유해한 응력이므로 산업현장에서는 이를 측정하기 위한 많은 관심을 가지고 있다. 현재 잔류응력 측정은 일반적인 방법을 사용하고 있지만 이러한 방법들은 어느정도 문제점을 내포하고 있다. 그러므로 레이저 스페클 간섭법에 유한요소법과 점 가열법을 혼합하여 산업 현장에 유해한 잔류응력을 측정할 수 있는 새로운 기법을 개발하였다. 이 기법에서 사용된 레이저 스페클 간섭계는 측정 시편의 응력이 풀릴 때의 면내 변형을 측정하기 위해서 사용되어 졌으며, 유한요소법은 응력 풀림을 위한 가열부의 온도와 그 밖의 변수들을 결정하기 위해서 사용되어 졌다. 잔류응력은 측정하고자 하는 부위의 가열 냉각에 의한 변형률에 의해 결정되어지며, 이에 대한 간단한 모델링을 제시하였다. 또한 본 실험은 변형의 3차원 정량화를 수행하기 위해서 레이저 스페클 간섭계의 전자 광학적 기법 중의 하나인 위상이동법을 이용하여 수행되어졌다. Residual stress is one of the causes which make defects in engineering components and materials. And interest in the measurement of residual stress exists in many industries. There are commonly used methods by which residual stresses are currently measured. But these methods have a little demerits, time consumption and other problems. Therefore we devised a new experimental technique to measure residual stress in materials with a combination of laser speckle pattern interferometry. finite element method and spot heating. The speckle pattern interferometer measures in-plane deformations while the heating provides for very localized stress relief. FEM is used for determining heat temperature and other parameters. The residual stresses are determined by the amount of strain that is measured subsequent to the heating and cool-down of the region being interrogated. A simple model is presented to provide a description of the method. In this paper, the ambiguity problem for the fringe patterns has solved by a phase shifting method.

혈관모세포종의 임상 분석

김은성,강삼석,이정길,김태선,정신,김재휴,김수한,이제혁 대한신경외과학회 1998 Journal of Korean neurosurgical society Vol.27 No.1