중합방법이 다른 의치상 레진의 적합도 평가

이상건,송윤관,송광엽 대한치과기재학회 1999 대한치과재료학회지 Vol.26 No.3

In addition to continuing the search for more accurate and dimensionally stable materials for denture bases, recently several processing methods for denture base resins which may reduce dimensional change during fabrication has been developed. The purpose of this study was to compare the dimensional accuracy of denture bases cured by four denture base processing methods, using the conventional heat-compression molding method, the continuous-pressure injection method, the microwave curing processing method, and the Sulfone system. A metal die simulating a maxillary edentulous arch and a polyvinylsiloxane impression(Reprosil, L. D. Caulk Co. U.S.A.) were used to construct 40 simulated master casts and denture bases with artificial teeth. Forty simulated denture bases 3 to 4㎜ thick were processed by four denture base processing methods following the manufacturer's instructions. The processed denture bases and casts sectioned through the posterior palatal region to allow measurement of its change by means of an travelling microscope. Observations were made on center of posterior palatal sectioned region. One-way ANOVA and paired samples t-tests were employed to compare the differences in distortion after deflasking and after finishing and polishing. The obtained results were as follows; 1. After deflasking, dimensional changes were diminished in order of conventional heat-compression molding, Sulfone system, continuous-pressure injection method, microwave processing method(p<0.05). 2. After finishing and polishing, dimensional changes were diminished in order of conventional heat-compression molding method, Sulfone system, microwave processing method, continuous-pressure injection method. The significant difference was found between conventional hear-compression method, continuous-pressure injection method(p<0.05). 3. The significant difference was found between after deflasking and after polishing in all methods, except continuous-pressure injection method(p<0.05).

가상공간의 가공 공정과 상태 구현에 관한 연구

이수훈,김봉석,홍민성,김종민,JUN NI,박상호,송준엽,이창우,하태호 한국공작기계학회 2005 한국공작기계학회 춘계학술대회논문집 Vol.2005 No.-

This paper presents virtual machining system in order to realize turning process in virtual space. A reliable virtual turning process simulation was developed based on the surface shaping system which is capable of considering geometric model, thermal error model, and vibration model. Accuracy of surface shape resulting from proposed machining simulator was verified experimentally. This paper also developed the watchdog agent that continuously assessed, diagnosed, and predicted performance of products and machines in machining. The Watchdog agent extracted feature signal using time-frequency analysis among various signals from multi-sensor and evaluated machining condition using performance confidence value.

청주시 토지이용의 특성과 공간구조적 해석

권상준,이은엽 淸州大學校 都市·地域開發硏究所 1996 都市·地域開發硏究 Vol.2 No.-

This study focus on the issue that the urban land uses are neither fixed nor rigid even though the contex of urban character is corelated to the social, historical and cultural bad ground. This study find on the spatial structure transition corelated to the characterized land uses that could show the biogentic and energenic integrations of the urban functions. The findings of the transition abstract as follow: a. The trend of the residential areas in Chongju can be represented as a simple formular Yi=13.85+(1.99×Xi). b. The trend of the commerical areas in Chongju can be represented as a simple formular Yi=-3.42+ (1.99×Xi). c. The trend of the indurstrial areas in Chongju can be represented as a simple formular Yi=2.44+(0.762×Xi). d. The trend of the open space areas in Chongju can be represented as a simple formular Yi=250.3+(-4×Xi).

마이크로 공장을 위한 디지털 생산 시뮬레이션

박상호,정영상,송준엽,이승우,김동훈,이수훈,박종권 한국공작기계학회 2005 한국공작기계학회 춘계학술대회논문집 Vol.2005 No.-

Existing manufacturing system has consumed too much energy, space and resource in micro parts manufacturing. To improve this, micro factory system is suggested. But it is difficult to get the high reliability in the assembly, production and inspection of the minute parts because the construction of the micro factory has been started just before. In this study, we will build the digital manufacturing simulation on the micro factory's process and verify the production and assembly process using this simulation.

Insulated Gate Transistor의 설계 및 제작

정상구,김진형,최연익,이동엽,황성규,성만영 亞洲大學校 1988 論文集 Vol.11 No.-

In this paper, we discuss fabrication and characteristics of the singular and the array-type insulated gate transisters(IGT). The starting wafers were two kinds: for a singular type IGT, p type(100) silicon with n??buffer and n??epitaxial layer; for a array-type IGT, p type(111) silicon with the n??epi layer. The channel regions were defined using the self-aligned double-diffusion process. Aluminum and poly silicon gate were used in the singular and array-type IGT, respectively. Characteristics of the singular IGT shows threshold voltage of 4 V, breakdown voltage of 73V and forward voltage drop of 0.7V. On the whole, the experimental results were in agreement with the theoretical ones when comparing the breakdown voltage and forward voltage drop. On the other hand, array-type IGT shows poor I-V characteristics, relatively low breakdown voltage and large leakage current.

무전해 Ni-P 도금시의 저전류밀도의 영향

정유엽,이성룡,황용길 동아대학교 공과대학 부설 한국자원개발연구소 1988 硏究報告 Vol.12 No.2

This study has been carried out to investigate the effect of low current in electroless Ni-P plating. The results obtained from the experiment are summarized as follows ; 1) The plating rate in the composite plating of electrolysis and electroless is more double than in electroless plating. And optimum temperature of electroless plating is 85-95℃ but composite plating has been gained a excellent quality of plating at 40℃ 2) The higher temperature, higher PH, and lower current density, the better a leveling of plating surface is. And the composite plating under 0.5A/d㎡ current density is better than the electroless plating in the leveling of plating surface. 3) With passing the time, the composite plating is less than that of the electroless in the reduction of plating rate. 4) Composite plating is higher than electroless plating in hardness when they have been plated and heat-treated at 350℃

유리단 국소의치 장착 후 M.K.G.에 의한 하악운동 형태 및 속도의 변화

최현미,조주온,이상돈,송광엽,박찬운 全北大學校 齒醫學硏究所 1992 전북치대논문집 Vol.10 No.1

The purpose of this study is to evaluate the effects of distal extension partial denture on the mandibular movement patterns and velocity. The subjects are 10 patients who have unilateral or bilateral distal extension edentulous area in maxillary and/or mandibular arches. Their mandibular movement patterns and velocity had been measured by Mandibular Kinesiograph(M.K.G.-K6 diagnostic system, Myo-tronics Inc. Seattle. WA. U.S.A.) once just before the treatment and 8 times every week since the dentures were placed. The data have been analyzed statistically by means of ANOVA and Tukey test. The results have been obtained as follows : 1. The placement of the dentures has reduced the amount of vertical and antero-posterior displacement in the habitual mandibular movement significantly(p<0.01). 2. The maximum opening and closing velocity and the mean opening and closing velocity showed no significant change with the placement of the partial dentures(p>0.01). 3. The velocity trace of maximum opening-closing movement has been more regularized and well-coordinated, and the number of clicks decreased continuously after placement of the dentures and showed stable patterns since the 5th week(p<0.01). 4. The left deviation has been decreased significantly after the placement of the dentures and showed no significant change since the 4th week. The right deviation has also been reduced, but there was shown no difference after the 1st week(p<0.01). 5. The crossover pattern has been most frequently observed in the frontal plane and the sagittal plane. It has not been changed with the denture placement and stabilized uniformly.

북한 고등중학교 「지리」 교과서 분석 연구

최석진,남상준,류재명,손용택,이동엽 한국사회과교육연구회 2000 사회과교육 Vol.- No.33

이 연구는 남북한 통일을 대비하여 북한 고등중학교 지리 교육과정 및 교과서를 비교·분석한 것이다. 남북한의 학제와 지리과 영역의 교육과정상의 위치가 다르고 북한의 교육과정을 입수할 수 없었기 때문에, 입수한 북한의 고등중학교 1학년부터 5학년의 지리교과서 5종(1991년도부터 1993년도 발행분)을 대상으로 분석하여, 남한 6차 교육과정의 중학교 사회와 고등학교 공통사회(한국지리) 및 세계지리 내용을 비교 분석하였다. 연구 결과는 다음과 같다. 첫째, 남북한 중등학교 지리교육은 교육과정상의 편제에서 북한은 고등중학교 전학년에 걸쳐서 지리가 독립과목으로 편제되어 있으나, 남한은 중학교 사회과에 통합되어 있고, 고등학교에서는 공통사회에 포함되었으며 세계지리가 선택과목으로 되어있는 등 지리교육 내용계열과 조직체계도 차이가 난다. 둘째, 지리 교육의 이념과 목표에서, 남한은 민주시민 양성을 목표로 하여 개인의 지리교육적 성취가 주된 것이나, 북한은 집단 구성원으로서의 개인 양성에 중점을 두고 있다. 이러한 차이점은 정치체제의 차이에서 비롯된 것이며 지리교육 내용의 구성과 강조점등에서 많은 차이점을 나타내게 하고 있다. 셋째, 지리교육 내용 구성과 서술 등에 차이가 있다. 국토지리와 세계지리 및 계통지리와 지지의 배열과 비중 등이 다르며, 내용의 서술에서도 차이점을 볼 수 있다. 특히, 북한에서는 국토지리와 자연지리의 비중이 높으며, 주요 개념과 용어 설명에서 남한과 다른 점이 보인다. 넷째, 교과서의 구성과 교수-학습 방법 및 자료 사용에서 차이점이 보인다. 북한에서는 실습, 실험 등이 강조되면서 실제적인 기능 향상에 많은 비중을 두고 있으며, 사진에 비해서 그림을 사용하는 삽화의 비중이 높다. 교과서의 외형적 체제와 지질 등에서 차이가 큰데, 이 점은 경제력의 차이에서 비롯된다. 본 연구 결과 남북한은 모두 지리교육을 중등학교에서 중요시하고 있으며, 지리교육을 통하여 소기의 목표 달성에 노력하고 있으나, 서로간에 상당한 차이점도 발견할 수 있었다. The purpose of this study is to understand the similarity and differences of the geography textbook between north and south Korea in preparation for the unification. Five geography textbooks for the first through fifth grade in secondary school were used in the analysis of the geography curriculum for secondary schools in North Korea. The major findings of the study are as follows: First, South Korea takes an integration approach to teach geography as part of the social studies education whereas North Korea treats geography as an independent subject throughout secondary school. Second, South Korea aims at nurturing democratic citizen, emphasizing individual achievement, whereas North Korea puts emphasize nurturing citizenship within community. Third, difference is noted in the organization and content of the geography curriculum between the two Koreas. North Korea puts more emphasis on national geography and natural geography than does South Korea. Forth, North Korean textbook is different from that of South Korea in that the former emphasizes on performance skills through hands-on practice and training. Also North Korean textbook uses more drawings than pictures. Despite differences in various aspects of curriculum and textbooks, there are a great deal of overlap in essential concepts and contents covered in two Koreas' geography textbooks. Both Koreas value geography education in the secondary schools and make efforts to fulfil the educational objectives in geography.

탄성 의치상 이장재의 캔디다 알비칸스 부착도에 관한 실험적 연구

하일수,조주온,이상돈,송광엽,박찬운 全北大學校 齒醫學硏究所 1992 전북치대논문집 Vol.10 No.1

The purpose of this study is to compare the response of four commercially available soft denture lining materials to the growth of C. albicans in vitro. Twelve samples of each soft lining materials were made to a uniform size and volume(15×5×4㎜) and sterilized using ethylene oxide. The samples were individually placed in culture tubes containing 5㎖ of sterile SDB(sabouraud dextrose broth dehydrated) and 0.1㎕ of activated C. albicans(ATCC 10231). The culture tubes had been incubated in incubator at 37℃. Three samples of each material had been tested at 3, 21, 35 and 56 days to determine the number of adherent cells of C. albicans on their surfaces and the number of nonadherent cells in the broth associated with each samples. The data have been analyzed by ANOVA and Scheffe test. The results have been obtained as follows : 1. In growth patterns of C. albicans within soft lining materials, Molloplast-B and K-33 were significantly higher(p<0.01) compared with Coe-Soft, but there was no significant difference between Coe-Soft, Coe Super-Soft and Mollosil(p>0.05). 2. Molloplast-B showed significantly higher(p<0.01) amounts of C. albicans adhering to its surface than other materials under experimental conditions. 3. Generally, adherence was significantly increased until 5 weeks, and after then showed decreased pattern in all materials(p<0.01). 4. The C. albicans was able to penetrate the inner portion of all samples. Coe-Soft showed most amounts of invaded C. albicans, followed in order by Mollosil, Molloplast-B, and Coe Super-Soft.

Notes : Abstracts of Presentations - New Hosts of Ampelomyces quisqualis Ces. in Korea

(Sang Yeob Lee),(Yong Ki Kim),(Sang Bum Lee) 한국균학회 2002 Mycobiology Vol.30 No.2