Genome-wide investigation of a Korean synthetic breed, Woori-Heukdon using the Illumina PorcineSNP60K BeadChip

Yong‑Min Kim,Ha‑Seung Seong,Jung‑Jae Lee,Da‑Hye Son,Jin‑Su Kim,Soo‑Jin Sa,Young‑Sin Kim,Tae‑Jeong Choi,Kyu‑Ho Cho,Joon‑Ki Hong,Jung‑Woo Choi,Eun‑Seok Cho 한국유전학회 2020 Genes & Genomics Vol.42 No.12

Background: Woori-Heukdon (KWH) is a Korean synthetic pig breed generated using Chookjin-Duroc (KCD), Chookjin-Chamdon (KCC), and their crossbreds. Currently, there is a severe lack of studies investigating the Korean breed populations including wild boars (KWB) throughout the genome. Objective: This study was performed to investigate the genetic characteristics of Korean pig populations at the genome-wide level. Methods: Using the SNP dataset derived from genotyped and downloaded datasets using the Illumina PorcineSNP60K BeadChip, we compared the genomes of 532 individuals derived from 23 pig breeds to assess the genetic diversity, inbreeding coefficient, genetic differentiation, and population structure. Results: KWB showed the lowest average expected heterozygosity (HE = 0.1904), while KWH showed the highest genetic diversity (HE = 0.02859) among Korean populations. We verified that the genetic composition of KWH, showing USD of 74.8% and KCC of 25.2% in ADMIXTURE analysis. In population structure analyses, KCC was consistently shown to be separated from other pig populations. In addition, we observed gene flow from Western pigs to a part of Chinese populations. Conclusion: This study showed that Korean native pigs, KCC have genetic differences in comparison with Chinese and Western pigs; despite some historical records and recent genetic studies, we could not find any clear evidence that KCC was significantly influenced by Chinese or Western breeds in this study. We also verified the theoretical genomic composition of KWH at the molecular level in structure analyses. To our knowledge, this is the first genomic study to investigate the genomic characteristics of KWH and KCC.

홍수퇴적토의 식재토양 재활용 연구

조용현,조항문,현재혁,조재범,김갑수 忠南大學校 環境問題硏究所 1997 環境硏究 Vol.15 No.-

In the study , the feasibility of deposit soil in river and stream bed as a substitute for conventional plant soil was investigated through the analysis of soil characteristics and germination growth rate for 75days. Proper mix between samples from different places was compared to optimize the germination and growth rate of plant in the ratio of 2 : 1 and 3 : 1 (sand : deposit). From the results, it could be concluded that the deposit mix 3 : 1 showed most favorable germination and growth conditions for pancy and the deposit containing enough amount of silt and clay components showed most favorable conditions for marigold. Consequently, the feasibility of deposits as a substitutional plant soil was evaluated to be high.

Effects of Extrusion Conditions on Pasting Properties of Potato and Potato : Wheat Flour Mixture

Cha, Jae Yoon,Cho, Yong-Jin,Kim, Chong-Tai,Kim, Chul-Jin,Ng, P. K. W. 한국산업식품공학회 2003 산업 식품공학 Vol.7 No.2

The purpose of this study was to develop extrusion process of fresh potato and to study the effects of extrusion condition on the pasting properties of extruded potato products. The blend of pressed potato and wheat flour and pressed potatoes were extruded at different die exit temperatures (110-160℃) and screw speed of 100 rpm using a twin-screw extruder with conveying, high and low shear screw configuration. The viscosity-related parameters, such as peak viscosity, through, final viscosity, peak time, and pasting temperature of the feed materials and extruded products, were studied using a rapid visco analyzer (RVA). Their water solubility index (WSI) and water absorption index (WAI) were also studied. The peak viscosity, through, final viscosity, and peak time of pressed potato extrudates and potato-wheat flour mixture extrudates decreased as die exit temperature increased. The WSI and WAI of potato products increased as die exit temperature increased. When high shear screw configuration was used, the values of viscosity-related parameters were lower than those when low shear screw configuration was used. The potato-wheat flour mixture products obtained different degrees of depolymerization from fresh potatoes and wheat flour depending on die exit temperature and screw configuration.

서울의 Penicillinase Producing Neisseria gonorrhoeae 발생빈도(1998)

김재홍,김준호,반재용,이정우,황성주,정준규,정성태,강진문,조흔정,홍창의,정혜신,이한승,김이선,이봉길,이종호,선영우,한기덕,윤성필,이성훈,안종성,박석범,문승현,조항래,김형섭,류지호,황재영,박준홍,손상욱 한양대학교 의과대학 2001 한양의대 학술지 Vol.21 No.1

In recent years, gonorrhea has been pandemic and remains one of the most common STDs in the world, especially in developing countries. For the detection of a more effective therapeutic regimen and assessing the prevalence of Penicillinase Producing Neisseria gonorrhoeae(PPNG), we have been trying to study the patients who have visited the Venereal Disease Clinic of Choong-Ku Public Health Center in Seoul since 1980 by menas of the chromogenic cephalosporin method. In 1998, 93 strians of N. genorrhoeae were isolated, among which 60(64.5%) were PPNG. The prevalence of PPNG in Seoul, which had been decreased to 39% in 1996 after a peak of 74.3% in 1993, is increased to 64.5% in 1998.

Isolation and Characterization of Antimicrobial Substance Macrolactin A Produced from Bacillus amyloliquefaciens CHO104 Isolated from Soil

( Seung Je Lee ),( Jeong Yong Cho ),( Jung Il Cho ),( Jae Hak Moon ),( Ki Deok Park ),( Young Ju Lee ),( Keun Hyung Park ) 한국미생물생명공학회 2004 Journal of microbiology and biotechnology Vol.14 No.3

EGDA 기능성 모노마로 희석된 Epoxy Acrylate의 전자빔 경화 및 코팅

조병기,윤경용,Petrov, S.E.,이재민,이정희,한도흥 영남대학교 공업기술연구소 2000 工業技術硏究所論文集 Vol.28 No.1

Electron beam curing of acrylated epoxy resin diluted with mono-functional monomer EGDA has been investigated under circumstances contacted with air and without air. The formulated resin in contact with N2 or covered with film could be cured up to 95% even with low dose of 5kGy and the surface of cured resin became very hard, but cured resin in existence of oxygen and without any additive had a low degree of curing and the surface became sticky due to insufficient curing. Additives such as curing agent P-115 or initiator BPO could increase the degree of curing to more or less one, but these additives could not remove completely surface stickiness. While, at high dose(more than 100kGy), addition of BPO were possible to make the irradiated surface of the resin be non-sticky even in existence of air. Degree of curing of the resin which contained pigment was very high at dose of around 20kGy. Elongation and stress at break on the cured resin with ferric oxide pigment were be higher than with non-ferric oxide pigment. Adhesion and anti-firing of the resin coated on cement block could be excellent.

벡터제어 기법을 이용한 유도전동기 해석 및 속도제어

조용성,박재형,최부귀 동아대학교 정보기술연구소 2000 情報通信硏究所論文誌 Vol.8 No.1

Recently the development of motor speed control systems with both good dynamic performance and simple implementation has been required. The vector control scheme considering flux harmonics for the permanent-magnet Induction Motor having low inertia, low weight, and high efficiency is proposed. To reduce the torque harmonics, current harmonics is employed. The vector control strategy is verified through digital simulation. In this paper, we analyst Induction Motor using Vector control method and the simulation is velocity control of Induction Motor using PI Controller.

정량적관상동맥조영술의 정확도 및 재현도

조용근,황진용,박헌식,채성철,전재은,박의현 慶北大學校 醫科大學 1996 慶北醫大誌 Vol.37 No.4

목적 : 정량적관상동맥조영술이 최근 널리 보급되고 있지만 국내외를 막론하고 이의 정확도 및 재현도에 관한 연구가 불충분하여 본 연구를 하였다. 대상 및 방법 : 110명의 환자에서 미국 General Electric사의 Advantx L/C/LP 디지탈혈관찰영기와 미국 USCI사의 좌관상동맥용 Judkins형의 Pro-Flo XT^(TM) 6F 도자를 이용하여 좌관상동맥조영술을 같은 각도에서 3회 실시하고 도자의 외경을 일본 Mitutoyo사의 정밀도 0.01㎜의 micrometer로 측정한 후 측정된 도자의 실제 직경과 정량적관상동맥조영술로 측정된 관상동맥의 직경을 비교하였다. 결 과 : USCI® Pro-Flo XT^(TM) 6F 좌관상동맥용 도자의 실제 외경은 1.91±0.03㎜이었고 정량적관상동맥조영술로 측정 한 도자의 외경은 1.94±0.11㎜이었다. 도자를 5.7F로 calibration했을 매 도자의 외경은 1.87±0.12㎜이었다. 세번 다 다른 화상에서 측정한 경우 근위부관상동맥 직경의 차이는 0.02±0.12㎜이었고 같은 화상에서 3회 측정하였던 경우에는 0.11±0.01㎜이었다. 결론 : 정량적관상동맥조영술의 정확도 및 재현도는 사용에 적합한 정도이나 적지 않은 문제점에 대한 보완이 필요하다고 생각된다. During quantitaive coronary angiography(QCA), contrast filled catheter is usually used as a scaling device. However the real diamerer of catheter is almost always smaller than the listed diameter. We measured the real diameter of catheters with precision micrometer(Mitutoyo® Japan). After caliberating the catheter as listed French size and diameter, we did QCA at the same tube position of the diameters of catheter and proximal left coronary artery. All measurements were done 3 times consecutively. The mean real diameter of USCI® Pro-Flo XT^(TM) 6 F left Judkin catheter was 1.91±0.03 ㎜. The mean QCA diamter of the same catheter was 1.94±0.11 ㎜. When we calibrated catheter as 1.91 ㎜. the mean QCA diameter was 1.87±0.12 ㎜. The mean differences of the diameters of the proximal left coronary artery were 0.20±0.12 ㎜ when the measurements were done in three different frames. When the measurements were done in the same frmae, the mean difference decreased to 0.11±0.01 ㎜. We conclude that the precision and reproducibility of QCA are within reasonable range, but more refimement is needed.

한국 정신장애의 역학 조사 연구[I] : 각 정신장애의 유병률

조맹제,함봉진,김장규,박강규,정은기,서동우,김선욱,조성진,이준영,홍진표,최용성,박종익,이동우,이기철,배재남,신정호,정인원,박종한,배안,이충경 大韓神經精神醫學會 2004 신경정신의학 Vol.43 No.4

Objectives : This study aims to estimate the prevalence of the DSM-IV psychiatric disorders in Korean population using the Korean version of Composite International Diagnostic Interview (K-CIDI). Methods : Subjects were selected by taking multi-stage, cluster samples of 7,867 adult household residents, 18 to 64 years of age, in ten catchment areas. Total 78 trained interviewers administered the K-CIDI to the selected respondents, from June 1 to November30,2001. Results : Total 6,275 respondents completed the interview. Some 33.5% of respondents reported at least one lifetime disorder, 20.6% reported at least one-year disorder, and 16.7% reported at least one-month disorder. The most common lifetime disorders were alcohol abuse/dependence (17.24%), nicotine dependence/withdrawal (11.19%), specific phobia (5.16%), and major de-pressive disorder (4.25%). The lifetime prevalence of substance abuse/dependence (0.25%) and schizophrenia (0.16%) was very low. Nicotine and alcohol use disorder showed very high male/female ratio. Mood disorder and anxiety disorder were more prevalent among female than male. Conclusion : The prevalence of psychiatric disorders was high. In comparison with other studies, remarkable differences in distributions of psychiatric disorders across the areas and times were observed.

비선형 시스템에 강인한 퍼지-PID 조합 제어기 설계에 관한 연구

조용성,이인용,한창훈,박재형,최부귀 東亞大學校 附設 情報通信硏究所 1999 情報通信硏究所論文誌 Vol.7 No.1

몬 논문에서는 통합형 퍼지-PID 제어기를 이요하여 비선형 시스템에 강한 제어기를 설계한다. 선형시스템에는 간단하고, 싸고, 좋은 성능 때문에 PID 제어기를 많이 사용한다. PID 제어기의 계수는 Ziegler-Nichols의 이론으로 결정하고, 비선형 요소의 제어를 위한 퍼지 제어기는 9게의 규칙만을 사용하였다. 이런 방법으로, 비선형 시스템에 대하여 보다 강인한 퍼지-PID 조합 제어기를 설계하여, 시뮬레이션 한 결과, 단순 PID 제어기보다 비선형 시스템에 대한 제어 성능이 좋음을 알 수 있었다.