http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
金漢星,高在雄,李相鎔,玄義泰,柳興根 건국대학교 1974 學術誌 Vol.17 No.1
The effect of reducing flood magnitudes, flood stages, and flood damage by upstream reservoir regulation are investigated in this study. The analytical procedures which has been established newly, are treated through this study for 7 index stations and same numbr of reaches. The method of this study could be expressed briefly as following procedures. Using stage-frequency relations and the potential damage survey data, damage-frequency relations are established, and from this, average annual flood damages computed. By holding out portions of the floods with various amounts of flood control storage in 6 reservoirs in the basin, routing were made to establish modified stage-frequency relations. From damage frequency relation, average annual damages are computed with and without condition of each control volume. The study result are concluded as follows; (1) The relationtship of corresponding water level between nearby stations are useful tools to adjust error of the data due to observation error and change of the gaging location. (2) The number of records about 10 years could not be applied for the statistical methods of flood frequency analysis. (3) The regional skew factors are recommended to apply flood frequency study by the log-Pearson Type III method. (4) The effect of damage reductions are greatly affectedin accordance with the routed flood. Therefore application of the Typical Tributary Contribution Flood are reasonable for this type of study. (5) In the North Han, effect of damage reduction due to the lacation of control point are gradually increased from upstream to downward until the confluence of North and South Han. (6) In the South Han, control effect are increased from Chungju to Yeoju where the maximum effect are analyzed and then decrease gradually until the confluence. (7) Better hydrologic and topographic combinations for the flood control are existed in South Han to compare with North Han in this study results.
Hyun Park,Woo‑Jin Lee,Jae‑Han Son,Han‑Kyun Shin,Sung‑Kyu Hong,Hyo‑Jong Lee 대한금속·재료학회 2022 METALS AND MATERIALS International Vol.28 No.8
We introduce a cost-effective method that combines electroplating with metal cold working processes to manufacture compositetubes with robust corrosion resistance. First, a 3-step electroplating process was developed to form an adhesive anduniform Ag coating on the outer wall of a 304 stainless steel tube. The process consisted of a Ni-strike step for removing thepassivation layer of the initial 304 tube, Cu deposition for smoothing the surface by adding a buffer layer, and Ag deposition. To reinforce the interfacial adhesion between the electroplated layers and the 304 tube and increase the area of the Ag coating,a pilger rolling or pilger rolling + heat-treatment process was performed after the Ag electroplating process. Scanningelectron microscopy of the composite tubes after each process indicated that the as-deposited Ag coating changed fromhaving a rough to smooth surface after only pilger rolling and with additional heat treatment. Electron backscatter diffractionanalysis of the microstructures and textures of the tubes revealed that dynamic recrystallization occurred extensively duringpilger rolling, resulting in the formation of a relatively defect-free grain structure without heat treatment. Furthermore,electrochemical polarization curves determined that the Ag-coated composite tubes are superior to the uncoated 304 tubein terms of corrosion resistance under Cl−atmosphere, owing to the formation of a AgCl passivation layer during testing. Surface analysis of the composite tubes suggests that the properties of the AgCl passivation layer are related to the grainsize of the Ag coating and the density of plastic-deformation-induced defects.
경북지역 주부들의 전통 부엌 세간의 보유 현황 및 이용실태 조사 연구
한재숙,최영희,조연숙,변재옥,한경필,김현옥,정종기,최석현 동아시아식생활학회 2002 동아시아식생활학회지 Vol.12 No.4
Housewives residing in the Kyongsang-Buk-do area were surveyed to determine their ownership of Korean traditional kitchen appliances and their usages. A breakdown of the appliances for the survey was as follows: 16 tableware, 17 household utensils, 15 heating utensils, 14 ceramic and earthen pottery, 6 stone utensils, 9 cooking utensils, 9 utensils made of the dried bamboo and bush clover, and 13 dining tables ("sang"). The types of the appliances with the largest ownerships and most frequently used were as follows: The jeopsi was most frequently owned, followed by the daejeop and the jaengban. The most frequently used item was the jubal,, followed by the daejeop and the jeopsi. Among the wooden utensils, bangmangi was most frequently owned, followed by the chanjang, the che, the doe, mal and hop. The most frequently used household utensil was the chanjang, followed by the takjasang and the doe, mal and hop. The utensil the most people owned for heating was the jujeonja, followed by the seoksoe, the musoesot and the siru. The most frequently used utensil for heating was the jujeonja, the musoesot and the seoksoe, in the order. As for the ceramic and earthen pottery, hangari and dok were owned and used most frequently. The maetdol and the jeolgu, though very low in their ownership rate, were most frequently owned items among the stoned utensils. The kal and the doma were the most frequently owned and used cooking utensils. The sokuri, and the chaeban and the baguni were the most frequently owned among the utensils made of the dried bamboo, bush clover and straw, while the sokuri was used the most frequently, followed by the chaeban and the jori. Among the dining tables, the kyojasang was the item most frequently owned, followed by the seonban and the chaeksangban, while the wonban was the most frequently used, followed by the kyojasang and the chaeksangban.
Jae-Min Park,Na-Ri Kim,Kyeong-Ho Han3,Ji-Hyeong Han,Maeng-Hyun Son,Jae-Kwon Cho 한국발생생물학회 2014 발생과 생식 Vol.18 No.4
Hyphessobrycon eques is a famous fish for ornamental fish market and aquarium. They are inhabit in regions of Amazon and Paraguay River basin. Serpae fishs were investigated 2–3 males are chased to female, and then males attempted to simulate the females abdomen. After fertilization, eggs were kept in incubators at 28oC. The fertilized eggs had adhesive and demesal characteristics and had a mean diameter of 0.92 ± 0.01 mm. Larvae hatched at 16 hrs post fertilization. The hatched larvae averaged 2.90 ± 0.16 mm in total length (LT). Complete yolk sac resorption and mouth opening occurred on the third day post hatching. At 45 days post hatching, the larvae were 12.5 ± 1.60 mm LT and had reached the juvenile stage.
서울의 Penicillinase Producing Neisseria gonorrhoeae 발생빈도(1998)
김재홍,김준호,반재용,이정우,황성주,정준규,정성태,강진문,조흔정,홍창의,정혜신,이한승,김이선,이봉길,이종호,선영우,한기덕,윤성필,이성훈,안종성,박석범,문승현,조항래,김형섭,류지호,황재영,박준홍,손상욱 한양대학교 의과대학 2001 한양의대 학술지 Vol.21 No.1
In recent years, gonorrhea has been pandemic and remains one of the most common STDs in the world, especially in developing countries. For the detection of a more effective therapeutic regimen and assessing the prevalence of Penicillinase Producing Neisseria gonorrhoeae(PPNG), we have been trying to study the patients who have visited the Venereal Disease Clinic of Choong-Ku Public Health Center in Seoul since 1980 by menas of the chromogenic cephalosporin method. In 1998, 93 strians of N. genorrhoeae were isolated, among which 60(64.5%) were PPNG. The prevalence of PPNG in Seoul, which had been decreased to 39% in 1996 after a peak of 74.3% in 1993, is increased to 64.5% in 1998.
C - Scan을 이용한 시편 내부의 결함 측정 및 탐상 (Ⅱ)
玄淸男,韓材國 弘益大學校 産業技術硏究所 2004 産業技術 Vol.14 No.-
In this study, the flaws in the several test specimens are detected by using a C-Scan system. The following results are obtained through this research; 1. How to detect the flaws in the specimens 2. How to determine the depth of the flaws in the specimens 3. How to determine the size of the flaws in the specimens 4. How to determine if the specimen is in one piece or not and how to detect defects at the joining part 5. Analysis by using Linear Profile and 3D View In order to determine the depth and size of the flaws in the specimens precisely, it is very important to operate the C-Scan system properly
한성현,서승희,박재성 순천향대학교 기초과학연구소 2004 순천향자연과학연구 논문집 Vol.10 No.2
The objectives of this study is to explain the perceived respiratory disease of female workers and to identify the affecting factors on their perceived respiratory disease. By the results of this study will be provided for basic data to develop health promotion program and to prevent the respiratory disease among female workers. The size of samples was 1875 female workers under forty years old. The data were collected method to identify the affecting factors on their perceived respiratory disease was used multiple linear regression analysis. The results were as follows; The average score of perceived respiratory disease by Cornell medical Index(CMI) is 1.92±2.16 and prevalence rate of respiratory disease is 3.6%. The results by multiple regression analysis were as follows: The affecting factors on CMI of respiratory disease were smoking, stress, workplace accident, status of indoor air pollution, respiratory disease in family, age, working period of current job(R^(2)=0.111). Respiratory health problem of female workers related to personal health behavior, job stress, indoor air-pollution of working place. Therefore the most effective health education for charge of health behavior(smoking) should be considered and must be provided the opportunity for health promotion program in workplace. Also the affecting factors on health status were working environments(indoor air pollution). Therefore, the most safety for working environments should be considered for the female workers in workplace.
산업장 근로자를 대상으로 실시한 한방 건강검진의 만족도
한현정,정재열,권소희,손용선,장두섭,이기남 한국산업위생학회 2003 한국산업보건학회지 Vol.13 No.2
The examinees who received oriental and western health examination both and submitted questionnaire were 257 workers in workplace for 1 month during health examination for industrial workers. The research was to compare the satisfaction of oriental and western health examination by the questionnaire. The data that were collected by health examination were analyzed into frequencies, ANOVA, T-test with use of SPSS 10.0 program by the research purposes. The results were as follows: 1. Health examination in satisfaction comparison by the general characteristics of subject was significant in oriental health examination for the subjects who had 9-10 working hours(P〈0.05). 2. The workers who had high confidence in result of health examination, affirmative thinking for requirement of health examination, arbitrary decision for receiving the health examination, had high satisfaction in oriental and western health examination both, It was statistically significant difference. 3. For the difference in subjective health condition's recognition, the subject who answered " Healthy" had high satisfaction in western health examination, and it was statistically in western health examination, and it was statistically significant The subject who answered "Healthy" for the early detection of disease had high satisfaction in western health examination, The subject who answered skeptical for the early detection of disease had high satisfaction. in oriental health examination and it was statistically significant. 4. The respondent who said "Yes" for the question, whether you know about oriental health examination or not before receiving oriental health examinatgion had relatively high satisfaction For the question about including of oriental health examination continuously in the coming future, the subject who replied affirmative answer had high satisfaction in average, and it was significant difference(P〈0.05). 5. For the question that will be needed in the item of oriental health examination, the highest item was the requirement of specific oriental health examination for various diseases, followed by the requirement of medical specialist for individual need of medical examination by the item, and the prescription of herbal medicine, the medical examination of cancer, the interview for folk remedies, the parallel treatment for acupuncture cupping, etc, the medical examination for adult disease, the requirement of room for medical examination etc.
한상현,양재승,정석진 경희대학교 산학협력기술연구원 1999 산학협력기술연구논문집 Vol.5 No.-
In this study, in order to make up its drawbacks in the MCM-41 catalytic system, platinum metals was doped in MCM-41. To confirmed MCM-41 structure investigations of XRD,N2 Adsorption-Desorption Isotherm, and B.E.T.surface areas were examined. Additionally NO-TPD and Simulated Flue Gases Mixing & Acitivity Test were peformed.According to Specific character of platinum metal, NO reduction activity was favored in low temperature range less than 300℃ and More Activity was obtained when platinum was doped over aluminum substituted MCM-41 than silica type MCM-41. Injected of 10 vol% water vapor on Pt/Al-MCM-41catalyst, negligible effect of NO reduction was found. when compared with the activity performance of Pt-ZSM-5, still Pt/Al-MCM-41 has relatively higher resistant to water vapor and sulfut contents in flue-gases.
有機製品의 物性改質에 必要한 Silicone 架橋劑開發에 관한 硏究
韓貞璉,梁在乾,鄭一鉉,裵長淳 단국대학교 1985 論文集 Vol.19 No.-
Alkoxysilanes were synthesized by me alcoholysis of trichbromethyhilanc having trifunctional group with corresponding alcohols under sodium alkoxide or HCl acceptor. The yields of the products were more than 80%. It was found that the rate of the hydrolysis of ethoxysilane was faster than methoxysilane. Hexamethyldisilazanes were synthesized by the reaction of chlorotrimethylsilane with ammonia gas or ammonium liquid solution. The yields of the products were 86% and 26% respectively. As the results of hydrolysis of disilazanes prepared under acidic, neutral, and alkali solutions, the rate of the hydrolysis was increased with the order of alkali, neutral, and acidic solution. After synthesizing α,ω-dichloromethylsiloxane by the reaction of diethoxydimethylsilane with dimethyldichlorosilane, α,ω-dichloromethylsiloxanol with terminal hydroxyl group was prepared by the hydrolysis of the product. p-Phenylene-bis-dimethylchlorosilane was prepared through Grignard reaction of p-dibromobenzene with dimethyldichlorosilane, and then p-phenylene-bis-dimethyltydroxysilane was synthesized by the hydrolysis of p-phenylene-bis-dimethylchlorosilane. α,ω-dichloromethylsiloxane