황순원 소설의 상징에 나타난 생태학적 관점

최선영(Choi, Sun-young) 문학과환경학회 2015 문학과 환경 Vol.14 No.3

Novel named “Trees standing on the slope” was written by novelist Hwang Sun-won after the 1960s that belonged to latter half period of Hwang"s novel works. Before the 1960s, Hwang"s novel works described fragments of human world that expressed not only conciliation but also warm humanity, while after the 1960s, his works reflected realities of the society to investigate the society deeply. However, evaluation and rhetoric of his works came from his works at initial times. However, the novel works made change at quality level to a certain degree considering geopolitical factors more than Hwang Sun-won"s works in previous times did. Novel of “Trees standing on the slope” that belonged to novel of latter half period of Hwang Sun-won had different characters and symbols than those of other novels of Hwang had. This study criticized analysis upon characters focused on humanism to find out values from various kinds of points and to interpret Hwang"s point of view of the world at “Trees standing on the slope”. Sukee"s path could be interpreted to be motherhood of reconciliation and embracement from point of view of humanism that Hwang Sun-won adhered to. Such a thought could be criticism in the 1950s that was abstract and absolute humanism. And, mythified violence of motherhood was thought to be reinforced. In this study, ‘pruning’ of Chapter II interpreted value of dualism to investigate Sukee and her pregnancy from point of view of not common value but multiple values. Men could get new fruit after pruning of trees or could not. Suggestion of possibility of fruit was not thought to give optimistic prospect. On the contrary, focus on pruning was likely to finish end. Of course, the novelist gave an alternative for not only destruction but also construction in his novel work that could not be practical way of before and after realities. Value of individuals could not be judged from point of view of humanism behavior to overcome cruelty of war experience and to recover humanism. The ideology of humanism for affirmative and optimistic future of pains of post-war generation in the history was rather abstract and ideological. Hwang Sun-won deeply investigated by symbols and characters. For instance, an woman named Sukee was thought to be new character who overcame the limitation to be made by the novelist. The study investigated the work carefully to have viewpoint of current times. Study on Hwang Sun-won"s novel was not rescue of completed world but cognition on new realities with possibility of incompleteness to create characters and to interpret in various ways.

Modeling of CO₂ Emission from Soil in Greenhouse

Lee, Dong-Hoon,Lee, Kyou-Seung,Choi, Chang-Hyun,Cho, Yong-Jin,Choi, Jong-Myoung,Chung, Sun-Ok Korean Society of Horticultural Science 2012 원예과학기술지 Vol.30 No.3

Greenhouse industry has been growing in many countries due to both the advantage of stable year-round crop production and increased demand for fresh vegetables. In greenhouse cultivation, $CO_2$ concentration plays an essential role in the photosynthesis process of crops. Continuous and accurate monitoring of $CO_2$ level in the greenhouse would improve profitability and reduce environmental impact, through optimum control of greenhouse $CO_2$ enrichment and efficient crop production, as compared with the conventional management practices without monitoring and control of $CO_2$ level. In this study, a mathematical model was developed to estimate the $CO_2$ emission from soil as affected by environmental factors in greenhouses. Among various model types evaluated, a linear regression model provided the best coefficient of determination. Selected predictor variables were solar radiation and relative humidity and exponential transformation of both. As a response variable in the model, the difference between $CO_2$ concentrations at the soil surface and 5-cm depth showed are latively strong relationship with the predictor variables. Segmented regression analysis showed that better models were obtained when the entire daily dataset was divided into segments of shorter time ranges, and best models were obtained for segmented data where more variability in solar radiation and humidity were present (i.e., after sun-rise, before sun-set) than other segments. To consider time delay in the response of $CO_2$ concentration, concept of time lag was implemented in the regression analysis. As a result, there was an improvement in the performance of the models as the coefficients of determination were 0.93 and 0.87 with segmented time frames for sun-rise and sun-set periods, respectively. Validation tests of the models to predict $CO_2$ emission from soil showed that the developed empirical model would be applicable to real-time monitoring and diagnosis of significant factors for $CO_2$ enrichment in a soil-based greenhouse.

Modeling of CO₂ Emission from Soil in Greenhouse

Dong Hoon Lee,Kyou Seung Lee,Chang Hyun Choi,Yong Jin Cho,Jong-Myoung Choi,Sun-Ok Chung 한국원예학회 2012 원예과학기술지 Vol.30 No.3

Greenhouse industry has been growing in many countries due to both the advantage of stable year-round crop production and increased demand for fresh vegetables. In greenhouse cultivation, CO₂ concentration plays an essential role in the photosynthesis process of crops. Continuous and accurate monitoring of CO₂ level in the greenhouse would improve profitability and reduce environmental impact, through optimum control of greenhouse CO₂ enrichment and efficient crop production, as compared with the conventional management practices without monitoring and control of CO₂ level. In this study, a mathematical model was developed to estimate the CO₂ emission from soil as affected by environmental factors in greenhouses. Among various model types evaluated, a linear regression model provided the best coefficient of determination. Selected predictor variables were solar radiation and relative humidity and exponential transformation of both. As a response variable in the model, the difference between CO₂ concentrations at the soil surface and 5-㎝ depth showed are latively strong relationship with the predictor variables. Segmented regression analysis showed that better models were obtained when the entire daily dataset was divided into segments of shorter time ranges, and best models were obtained for segmented data where more variability in solar radiation and humidity were present (i.e., after sun-rise, before sun-set) than other segments. To consider time delay in the response of CO₂ concentration, concept of time lag was implemented in the regression analysis. As a result, there was an improvement in the performance of the models as the coefficients of determination were 0.93 and 0.87 with segmented time frames for sun-rise and sun-set periods, respectively. Validation tests of the models to predict CO₂ emission from soil showed that the developed empirical model would be applicable to real-time monitoring and diagnosis of significant factors for CO₂ enrichment in a soil-based greenhouse.

Development of a Reduction Algorithm of GEO Satellite Optical Observation Data for Optical Wide Field Patrol (OWL)

Sun-youp Park,Jin Choi1,Jung Hyun Jo,Ju Young Son,Yung-Sik Park,Hong-Suh Yim,Hong-Suh Yim,Hong-Kyu Moon,Young-Ho Bae,Jang-Hyun Park 한국우주과학회 2015 Journal of Astronomy and Space Sciences Vol.32 No.3

An algorithm to automatically extract coordinate and time information from optical observation data of geostationary orbit satellites (GEO satellites) or geosynchronous orbit satellites (GOS satellites) is developed. The optical wide-field patrol system is capable of automatic observation using a pre-arranged schedule. Therefore, if this type of automatic analysis algorithm is available, daily unmanned monitoring of GEO satellites can be possible. For data acquisition for development, the COMS1 satellite was observed with 1-s exposure time and 1-m interval. The images were grouped and processed in terms of “action”, and each action was composed of six or nine successive images. First, a reference image with the best quality in one action was selected. Next, the rest of the images in the action were geometrically transformed to fit in the horizontal coordinate system (expressed in azimuthal angle and elevation) of the reference image. Then, these images were median-combined to retain only the possible non-moving GEO candidates. By reverting the coordinate transformation of the positions of these GEO satellite candidates, the final coordinates could be calculated.

노인의 영적 간호요구

최미혜,김경희,김귀옥,김기숙,김수강,김정신,김춘숙,노흥진,박지연,성혜연,오명선,이선희,이원옥,이윤영,이현수,장명재,차혜경,채정선,홍상희 중앙대학교 의과대학 간호학과 간호과학연구소 2001 중앙간호논문집 Vol.5 No.1

This study was designed to exam the aged's needs for spiritual nursing care. The purpose was to serve as a basis for the development of spiritual nursing practice. The major findings are as follows : 1. The degree of needs for spiritual nursing care as area was that needs of love and relationship mean 22.0, needs of meaning and object mean 28.2, needs of forgiving mean 13.5. Total needs for spiritual nursing care mean 63.7, which was on the upper middle level. The needs of meaning and object was rated highest. 2. Among the general characteristics of the subjects, needs of love and relatiohship wasn't significanlty different. 3. Among the general characteristics of the subjects, needs of meaning and object was significantly different according to two factors : age(F=7.260, p=0.001), religion(F=5.275, p=0.001). Higher needs of meaning and object was possessed by the older than the younger, by the one who have religion than the other. 4. Among the general characteristics of the subjects, four factors made a significantly difference to needs of forgiving : sex(t=-2.851, p=0.006), age(F=8.201, p=0.001), religion(F=6.928, p=0.000), disease(t=2.327, p=0.024). Higher needs of forgiving was possessed by man than woman, by the older than the younger, by the one who have religion than the other, by the one who have disease than the other.

한의진단명과 진단요건의 표준화 연구 III : 3차년도 연구결과 보고

최선미,양기상,최승훈,박경모,박종현,심범상,김성우,노석선,이인선,정진홍,이진용,김달래,임형호,김윤범,박성식,송태원,김종우,이승기,최윤정,신순식 한국한의학연구원 1997 한국한의학연구원논문집 Vol.3 No.1

The diagnostic requirements were suggested and explained regarding the systems of differentiation of symptoms and signs in the third year study of standardization and unification of the terms and conditions used for diagnosis in oriental medicine. The systems were as follows : - analyzing and differentiating of epidemic febrile disease - analyzing and differentiating in accordance with the Sasang constitution medicine based on four-type recognition - differentiation of disease according to pathological changes of Chong and Ren channels - standards for diagnosis of women's disease - standards for diagnosis of children's disease - standards for diagnosis of motor and sensor disturbance (-muscle. born, joint, etc.) - standards for diagnosis of neuropsychiatric disease - standards for diagnosis of five sense organ disease - standards for diagnosis of external disease The indivisual diagnosis pattern was arranged by the diagnostic requirements in the following order : another name, notion of diagnosis pattern, index of differentiation of symptoms and signs, the main point of diagnosis, analysis of diagnosis pattern, discrimination of diagnosis pattern, prognosis, a way of curing a disease, prescription, herbs in common use, disease appearing the diagnosis pattern, documents. The standards for diagnosis of each disease was arranged by the diagnostic requirements in the following order : another name, notion of disease, the main point of diagnosis, analyzing and differentiating of disease, analysis of disease, discrimination of disease, prognosis, a way of curing and prescription of disease, disease in western medicine appearing the disease in oriental medicine, documents.

Study on Leaf Production of Angelica acutiloba by Mulching with Polyethylene Film

Choi,Seong-Kyu,Yun,Kyeong-Won,Chon,Sang-Uk,Seo,Young-Nam,Seo,Kyoung-sun,Kwon,Byung-Sun 한국자원식물학회 2003 Plant Resources Vol.6 No.3

This study was conducted to produce effectively more leaves of Angelica acutiloba through year-round production system by using various mulching materials and polyethylene(PE) tunnel. Soil temperature by covering treatment was higher in PE mulching and PE tunnel than in rice straw mulching, especially showing the highest temperature in PE tunnel from April through May. Water content of soil was higher in PE mulching than in non-mulching. Leaf production of Angelica acutiloba through year-round production showed the highest in PE tunnel and root production in PE mulching. These results suggest that leaf production of Angelica acutiloba can be maximized through PE tunnel cultivation system.

Flexural Responses of Prestressed Hybrid Wide Flange Composite Girders

Sun?Jin Han,Deuck Hang Lee,Jae?Yuel Oh,Seung?Ho Choi,Kang Su Kim 한국콘크리트학회 2018 International Journal of Concrete Structures and M Vol.12 No.5

In this study, prestressed hybrid wide flange (PHWF) composite girders were proposed, and full-scale flexural tests were conducted to evaluate their structural performances. This new proposed girder system was developed and designed to effectively resist external loads considering the actual construction sequences. Two specimens with and without shear connectors were fabricated and tested to examine the effect of the shear connectors for achieving the fully-composite behaviors between a cast-in-place (CIP) concrete and the prefabricated prestressed steel–concrete composite girder. The test results showed that sufficient flexural strengths and deformation capacities can be obtained in both types of PHWF composite girders with and without shear connectors. To reflect the actual construction stages of the proposed PHWF composite girder, nonlinear flexural analyses were proposed considering the prestress effect and segmental effect before and after composite with the CIP concrete, respectively. The observed and analysis results of strain behaviors of the PHWF girder specimens were also compared and discussed in detail.

하악골 성장 지표로서 경추골 성숙도의 유용성

최봉선,최남기,김선미,양규호,정성수 大韓小兒齒科學會 2007 大韓小兒齒科學會誌 Vol.34 No.4

This study was to investigate if cervical vertebrae maturation stages are as useful as hand-wrist maturation stages in evaluating the mandibular growth. The subject consisted of 292 girls aged from 8 to 16 years with normal occlusion. They were classified according to diagnosis by using studycast. lateral cephalogram, and handwrist X-ray film. The results were as follow: 1. Cervical vertebrae and hand-wrist maturation stages increased with age. 2. All mandibular measurements (Ar-Go, Go-Me, N-Go, S-Gn, N-Me) increased linearly with cervical vertebrae maturation stages. 3. Ar-Go, Go-Me, N-Go, S-Gn increased linearly with hand-wrist maturation stages. 4. Ar-Go, Go-Me, N-Go, S-Gn increased relatively rapidly between cervical vertebrae maturation stages 3 and 4. Go-Me and S-Gn increased relatively rapidly between hand-wrist maturation stages 6 and 7. 5. Ar-Go, Go-Me, N-Go, S-Gn, N-Me had high correlations with cervical vertebrae maturation stages as well as hand-wrist maturation stages. These results suggest that cervical vertebrae maturation stages are reliable on evaluating the mandibular growth. 하악골 성장을 평가하는 데 경추골 성숙도가 수완부골 성숙도만큼 유용한가 규명하고자 본 연구를 시행하였다. 정상교합을 가진 만 8세∼만 16세 여성 292명을 연구대상으로 하여 진단석고모형,측모두부규격방사선사진,그리고 수완부방사선사진을 이용하여 경추 및 수완부의 골성숙도를 비교하여 다음과 같은 결과를 얻었다. 1. 연령 증가에 따라 경추 및 수완부의 골성숙도가 일정하게 증가하였다. 2. 경추골 성숙도가 증가할수록 Ar-Go,Go-Me,N-Go,S-Gn,N-Me이 일정하게 증가하였다. 3. 수완부골 성숙도가 증가할수록 Ar-Go,Go-Me,N-Go,S-Gn이 일정하게 증가 하였다. 4. 경추골 성숙도 3단계와 4단계 사이에서 Ar-Go,Go-Me,N-Go,S-Gn이 크게 증가하였고,수완부골 성숙도 6단계와 7단계 사이에서 Go-Me,S-Gn이 크게 증가 하였다. 5. Ar-Go,Go-Me,N→Go,S一Gn,N-Me은 경추 및 수완부 골성숙도와 각각 유의 한 상관성을 보였다. 이상의 결과는 하악골 성장을 평가하는 데에 경추골 성숙도가 수완부골 성숙도처럼 유용하게 사용될 수 있음을 시사한다.

적외선열화상장치를 이용한 Buchanan plugger 표면의 온도상승 분석

최성아,김선호,황윤찬,윤창,오병주,최보영,정우남,정선와,황인남,오원만 大韓齒科保存學會 2002 Restorative Dentistry & Endodontics Vol.27 No.4

This study was performed to evaluate the temperature rise on various position of the Buchanan plugger, the peak temperature of plugger's type and the temperature change by its touching time of heat control spring. The heat carrier system 'System B' (Model 1005. Analytic Technologies, USA) and the Buchanan's pluggers of F, FM, M and ML sizes are used for this study. The temperature was set to 200℃ which Dr. Buchanan's "continuous wave of condensation" technique recommended on digital display and the power level on it was set to 10. In order to apply heat on the Buchanan's pluggers, the heat control spring was touched for 1, 2, 3, 4 and 5 seconds respectively. The temperature rise on the surface of the pluggers were measured at 0.5 mm intervals from tip to 20 mm length of shank using the infraed thermography (Radiation Thermometer-IR temper, NEC San-ei Instruments, Ltd, Japan) and TH31-702 Data capture software program (NEC San-ei Instruments, Ltd, Japan). Data were analyzed using a one way ANOVA followed by Duncan's multiple range test and linear regression test. The results as follows. 1. The position at which temperature peaked was approximately at 0.5 mm to 1.5 mm far from the tip of Buchanan's pluggers (p<0.001). The temperature was constantly decreased toward the shank from the tip of it(p<0.001). 2. When the pluggers were heated over 5 seconds, the peak temperature by time of measurement revealed from 253.3±10.5℃ to 192.1±3.3℃ in a touch for 1 sec, from 218.6±5.0℃ to 179.5±4.2℃ in a touch for 2 sec, from 197.5±3.0℃ to 167.6±3.7℃ in a touch for 3 sec, from 183.7±2.5℃ to 159.8±3.6℃ in a touch for 4 sec and from 164.9±2.0℃ to 158.4±1.8℃ in a touch for 5 sec. A touch for 1 sec showed the highest peak temperature, followed by, in descending order, 2 sec, 3 sec, 4 sec. A touch for 5 sec showed the lowest peak temperature (p<0.001). 3. A each type of pluggers showed different peak temperatures. The peak temperature was the highest in F type and followed by, in descending order, M type, ML type. FM type revealed the lowest peak temerature (p<0.001). The results of this study indicated that pluggers are designed to concentrate heat at around its tip, its actual temperature dose not correlate well with the temperature which Buchanan's "continuous wave of condensation" technique recommended, and finally a quick touch of heat control spring for 1 sec reveals the highest temperature rise.