http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Application of Artificial Insemination Technology for Dairy Breeding in Mongolia
Hyun‐Tae Jo,Jong‐In Jin,Seong‐Su Kim,Byung‐Hyun Choi,Tumor Baldan,Jung‐Gyu Lee,Yun‐Shik Kim,Sam‐Churl Kim,Il‐Keun Kong 한국동물생명공학회(구 한국동물번식학회) 2011 발생공학 국제심포지엄 및 학술대회 Vol.2011 No.1
This study was focused on improvement of milk production in Mongolia dairy industry by artificial insemination (AI) technology, of which was supported from ODA project of KOICA in Republic of Korea. The study was started from January 2009 to present and 3rd years in this year. So, all data, especially synchronization and pregnancy of dairy cows (Holstein) will be summarized in final result in this year. For synchronization, total 81 dairy cows selected from 4 private farms that were 38, 30, 8 and 5 in Undarmal milk, Onjin (Enkhbayer), Jargalant, and BRM School, respectively. All the dairy cows were injected intramuscular (IM) of 5 ml PGF2α in the vulva and detected estrus 2 to 3 days after PGF2α injection. Total 78 out of 81 dairy cows (96.3%) were detected estrus by only 1 time injection of PGF2α. The dairy cows that were induced estrus, inseminated with 0.5 ml dairy frozen semen by conventional AI techniques. The pregnancy diagnosis of the AI dairy cows was detected by uterus palpation after 60 days of insemination. Total 75 from 78 inseminated dairy cows (90.1%) were diagnosis pregnant. The estrus induction and pregnant rate were very effective using PGF2α injection and conventional AI techniques in Mongolia dairy cow. The results indicated that AI after estrus induction in Mongolia dairy cows could be applied to dairy breeding technology to improve the breeding efficiency and milk production.
퍼지 전문가 시스템을 이용한 BLDC 전동기의 자동조정 PID 속도제어에 관한 연구
진광식,윤태성,권세현 國立 昌原大學校 産業技術硏究所 1998 産技硏論文集 Vol.12 No.-
This paper proposes the rule-based expert system with auto-turning of PID controller gain and shows the efficiency of fuzzy expert system for the speed control of BLDC motor. The PID controller gain tuned using RZN(refined ZN) formula to initial tuning and fuzzy expert system to subsequent tuning. The fuzzy expert PID control method proposed in this paper results in the reduction of overshoot, the rapid response and the robustness for disturbances and noise.
陳致燮,張熙碩,崔顯泰,嚴長燮 부산대학교 공과대학 1989 硏究報告 Vol.38 No.-
This paper attempts to extract the crack tip stress intensity factors and to make a crack propagation model under mixed mode, from the finite element analysis of the concrete structures. In finite element analysis, all elements are initially assumed to be conventional quadratic isoparametric elements and are replaced by 6 node triangular singularity elements in the crack tip zone only. The stress intensity factors and the angle of propagation are carried out by displacement correlation technique and maximum circumferential tensile stress theory respectively. At the first part in a series of two papers, some numerical examples about the concrete SENB and DISK are presented to illustrate the practical effectiveness of the technique.
홍주현,진계환,박경순,조명찬,박길선,차은종,이태수 충북대학교 의과대학 충북대학교 의학연구소 2003 忠北醫大學術誌 Vol.13 No.2
연구목적: 초소형 정밀 기계 기술로 제작된 2차원 가속도 센서와 916 MH2 단거리 고주파 데이터 통신 기술을 응용하여 인체의 운동상태를 자동으로 감지하고 분류하는 기법을 제안 하고자 하였다. 재료 및 방법: 인체의 신호를 획득하기 위하여 미국 버클리대에서 제작한 무선 센서를 등 산용 조끼의 전면상단에 부착해서, 대상자의 흉골 부위에 위치하도록 하고, 앉은 상태에서 일어서거나 눕거나 하는 동작 및 그 역동작이 일어날 때, 가속도 센서에서 감지되는 4가지 종류의 파형 현화에 해당되는 데이터를 무선센서 네트웍을 통해 획득하였다. 결과: 획득한 신호를 주성분분석(Principal Component Analysis)과 지원벡터머신(Support Vector Machine)을 사용하여, 2차주성분까지를 도표화하고 클러스터링 함으로써, 4개의 영역으로 분할하는 것이 가능함을 말 수 있었다 결론: 소형 센서들이 작동되는 임베디드 컴퓨팅 환경에서 일상생활 중에 발생하는 인체의 4가지 동작을 자동으로 감지하고 분류하는 것이 가능함을 보였다. Purpose: New monitoring and classifying method of human motion contort was pro- posed by using 2-axial MEMS accelerometer and 916 MHz short-range data communica-tion technology. Materials and Methods: The wireless sensor of MICA mote was attached to a woman mountain vest and located close to the subject's sternum. During four types of sub-ject's motion, that is, sit-to-stand, stand-to-sit, sit-to-tying, and tying-to-sit, waveform changes of the accelerometer data were acquired by wireless sensor network. Results: The acquired signal was analyzed by Principal Component Analysis(PCA) and Support Vector Machine(SVM) technique. By clustering the first and second principal components, four regions corresponding to the four types of motion, were clearly segment-ed. Conclusion: Human motion context during daily life could be monitored and classified automatically by using small sensors in embedded computing environment
건강질단 질병 유소견자들의 순천향구미병원 외래이용에 영향을 미치는 요인
김진석,우극현,함정오,유재영,최태성,하봉구,윤성용 순천향의학연구소 2002 Journal of Soonchunhyang Medical Science Vol.8 No.1
Background ; The purpose of routine health screening of employee is not only to detect worker's disease at early stage but also to provide early appropriate health service. But, majority of patients who diagnosed by routine health screening haven't underwent health service utilization. Soonchunhyang Kumi Hospital had been provide total occupational health service in kumi industrial estate including health screening, worker interview at workplace by occupational nurses and doctors. Object ; We want to know how much proportion of patient who are diagnosed by routine health screening had visited Soonchunhyang Kumi hospital out-patient clinic and factors influencing such health care service utilization. Method ; Initial study subject were 189 workers who had proved to have hypertension, diabetes mellitus, hyperlipidemia in routine health screening which performed during year of 2000. Among those, 160 workers who had finished questionnaire were selected for final study subject. We investigate whether they had visited health services or not, if they had, what kind of health care facility they visited, and other factors which influencing their health service utilization. Result ; Among 160 workers, 59(36.9%) had visited Soonchunhyang Kumi hospital, 47(29.4%) had visited other health care facility, and 54(33.8%) had not went to any health care facility. Factors which influencing Soonchunhyang Kumi hospital utilization is sex, job, staff's support to hospital visit during worktime, history of medical consultation about health screening result.
강봉의 냉간 인발시 발생하는 잔류응력 성분에 관한 유한요소 해석
백태현,최희진 국립7개대학공동논문집간행위원회 2005 공업기술연구 Vol.5 No.-
Prediction the behaviour of steel during a deformation process under service conditions is one of the main challenges in cold forming, The design of optimized forging schedules, by means of conventional trial and error methods, has become increasingly heavy in terms of time and cost in a competitive environment. During the last few years, numerical simulations have become a very efficient tool to arrive these goals. In this paper, finite element analysis was used to analyze the distribution of residual stress components in a rod with respect die angle and/or area reduction in cold drawing process. Cold drawing brought sunken-in deformation at the bottom land of the rod that was in accord with the result obtained from the analysis using ABAQUS. The results obtained from finite element analysis were in close agreement with the determined high-accuracy measurements.