Ho-166 부착풍선도자를 이용한 방사선 조사의 돼지 관상동맥 스텐트 재협착 예방 효과

김원 ( Kim Won ),정명호 ( Jeong Myeong Ho ),박옥영 ( Park Og Yeong ),정우곤 ( Jeong U Gon ),박우석 ( Park U Seog ),김주한 ( Kim Ju Han ),안영근 ( An Yeong Geun ),조정관 ( Jo Jeong Gwan ),박종춘 ( Park Jong Chun ),강정채 ( Kang Je 한국지질동맥경화학회 ( 구 한국지질학회 ) 2002 韓國脂質學會誌 Vol.12 No.1

배경 : 국내에서 개발된 방사선 동위원소 Holmium-166 (166Ho)은 주로 베타선을 방출하며, 166Ho을 부착한 풍선도자를 이용하여 돼지 관상동맥 재협착 모형에서 풍선확장술 후 신생내막 증식을 전신적 부작용 없이 안전하고 효과적으로 억제하였음을 보고한 바 있다. 본 연구에서는 돼지 관상동맥 스텐트 재협착 모형에서 스텐트 시술 후 신생내막 증식에 의한 재협착 병변을 166Ho 부착 풍선도자를 이용하여 치료하여 그 효과를 관찰하고자 하였다. 방법

원위 대퇴골의 고립성 골연골종에서 발생한 속발성 연골 육종 1례 보고

정필현,황장수,강석,김용민,오형호,채동주,김종필 동국대학교 경주대학 1996 東國論集 Vol.15 No.-

연골육종은 비교적 서서히 자라며 늦게 전이하는 악성 연골 종양으로 알려져 있다. 골 연골종에서 발생한 속발성 연골육종은 발생빈도는 드물며 타부위로의 전이가 적고 악성도가 낮은 경우가 많아 적합한 수술적 치료로서 좋은 예후를 보이는 것으로 보고되고 있다. 본 동국대학교 정형외과학 교실에서는 우측 대퇴골 원위부 골간단부에 생긴 고립성 골 연골종에서 이차적으로 발생한 연골육종을 치험한 바 문헌고찰과 함께 보고하는 바이다. A case of Secondary Chondrosarcoma Arising from Solitary Osteochondroma of the Distal Femur Department of Orthopaedic Surgery, College of Medicine, DongGuk University Phil Hyun Chung M.D., Jung Su Hwang M.D., Suk Kang M.D., Yang Mln Kim M.D., Hyung Ho Oh M.D., Dong Ju Chae M.D., Jong Pil Kim M.D. Chondrpsarcoma is a malignant cartilage-forming tumor that grows slowly and metastasis of this tumor occurs in late stage. Secondary chondrosarcomas arising from a solitary osteocartilaginous exostosis are rare and those have a better prognosis than other chondrosarcomas, and they rarely metastasize. We present our experience with a case of secondary chondrpsarcoma arising in solitary osteochondroma of distal metaphysis of right femur with clinical details.

과학 학습 부진아 지도로서의 중재반응모형(RTI)의 적용 효과

주혜련,박종호 이화여자대학교 사범대학 교과교육연구소 2013 교과교육학연구 Vol.17 No.4

This study attempted to demonstrate the effect of Response to Intervention(RTI) as a teaching methodology for underachievers in science. The participants were fifth-grade students, and the intervention program involved the science textbook section 'The speed of an object'. In the first stage of the intervention, the subject matter was taught generally over a period of three weeks. The researcher conducted subgroup teaching using the direct method of teaching in the second stage of the intervention for eight weeks. This study consisted of three stages: the first stage of the intervention involved selecting underachievers in science and determining their baseline(the bottom 15%), the second provided sixteen thirty-minute sessions, twice a week over eight weeks. In the first stage of the RTI program, the researcher selected eleven underachievers in a fifth-grade science class for an experimental group. In the second stage, interventions were provided to them based on the Direct Instruction(DI) method. During the interventions, three achievement tests and ten curriculum-based assessments were conducted. The major research findings were as follows: first, the interventions based on the DI approach had positive effects on the underachievers. The science underachievers showed a higher achievement level than the general students when a sincere attitude was indicated. Second, the RTI program had positive effects on some of the science underachievers; although three of the eleven participants in the second stage showed no significant change. Third, this study suggests that underachieving in mathematics and science is closely related; science underachievers in the second stage were all underachievers in mathematics, too. RTI has not been applied to mathematics classes; but, based on the results of this study. RTI in science classes should be actively carried out in the future; it could contribute to the relief and determination of science underachievers. 현대 과학교육은 ‘모든 이를 위한 과학’을 지향하고 있다. 과학적 인재를 양성하는데 주력하는 것이 아니라 모든 이에게 과학적 소양을 함양시킬 수 있는 과학교육에 집중하는 것이다. 초등교육은 더욱 그러하다. 이에 본 연구는 중재 반응(Response to Intervention, RTI)을 적용하여 과학 학습부진 아동을지도하여 구제하는 데 효과가 있는지 입증하기 위해 실시되었다. 초등학교 5학년 아동을 대상으로 하였으며 5학년 2학기 3단원 ‘물체의 속력’단원으로 중재 프로그램을 구성하였다. 중재 1단계에서는 3주에 걸쳐 과학 전담 교사가 일반 교수를 실시하였고, 중재 2단계는 8주간연구자가 직접 교수법을 활용한 소집단 교수를 실시하였다. 1단계에서 학업성취도 검사 2회, 교육과정 중심 평가는 4회를 실시하여 두 검사 점수의 합이 하위 15%를 나타내는 15명을 과학 학습부진 아동으로 선별하여 그중 본인의 동의를 얻은 11명을 2단계 연구를 실시하였고, 2단계에서는 총3회의 학업성취도 검사와 총 10회의 교육과정 중심 평가를 실시하여 중재 반응의 효과를 분석하였다. 그 결과 2단계 중재로 과학 학습부진 아동으로 선별된 11명의 아동 중 8명이 일반 아동을 뛰어넘은 점수를 획득하였다. 따라서 과학 학습부진 아동이라 할지라도 중재 반응의 2단계소집단 교수에 성실히 임한 부진 아동은 일반 아동과 같은 학업성취도를 보일 수 있음을 확인하였고, 구제되지 못한 나머지 3명의 아동은 동일한 시간 동안 동일한 중재를 적용했음에도 불구하고 반응하지 않았으므로 과학 학습부진 아동이라고 판별할 수 있었다. 또한 2단계에서 반응을 보이지 않아 과학 학습부진 아동으로 판별된 아동이 모두 수학기초 학습 부진이었던 것으로 나타나 수학기초 학습 부진과 과학 학습 부진은 관련성을 가지고 있음을 볼 수 있었다. 이러한 연구결과를 바탕으로 이제껏 수학에서만 다루어지던 틀을 깨고 앞으로는 과학에서도 중재 반응을 적용한 중재 프로그램을 통하여 과학 학습부진 아동의 구제와 판별에 기여할 것으로 보인다.

데이터 웨어하우징의 구축과 발전동향

주상호,이종호 公州大學校工科大學生産技術硏究所 1998 論文集 Vol.6 No.-

Data Warehousing is a data set of subject-orientation, integration, time variancy, nonvolatility to support decision making. Nowadays, information technology is changing past OLTP environment into OLAP environment. And DW is most suitable environment support decision-making for competitive advantages in management activities. So, to have a higher competitiveness advantages, in case of building DW, it is very important to look for the proper system building technique after the integrated review and analysis considering the purpose and the amount of data, etc.

발포폴리스티렌비드를 사용한 경량콘크리트의 역학적 특성에 관한 실험적 연구

주재금,이종찬,오세출,유택동,정광량,서치호 대한건축학회 2003 대한건축학회 학술발표대회 논문집 - 계획계/구조계 Vol.23 No.1(구조계)

The purpose of this study is to obtain basic data on the properties of the lightweight concrete within expanded polystyrene beads for various applications in the field. Inquiring into the change of the properties as altering cement matrix mixture and the capacity mixture ratio of expanded polystyrene beads, the mixture plane of this study is set up as W/C is fixed 50%, expanded polystyrene beads is increased 10% from 0% to 80% per 1m³ and the ratio of cement:sand in the cement matrix is 1:0, 1:0.5, 1:1. The results of this study are as follow. The slump as changing the mixture ratio of expanded polystyrene beads decrease smoothly until mixture ratio 50% but decrease rapidly being in excess of 50%. The density decrease regularly as the mixture ratio of expanded polystyrene beads increase but the ratio of strength decrease. The difference of cement matrix. The strength of cement matrix having more sand mixture ratio relatively decrease rapidly as increasing the mixture ratio of expanded polystyrene beads. It is judged decreased strength phenomenon as the quantity of coherent material created in the mixture decrease rapidly.

VDT작업별 정신사회적 스트레스와 근골격계 장애에 관한 연구

백남종,강종두,주영수,배인근,권호장,박종만,조수헌,김돈규,김재용,최홍렬 大韓産業醫學會 1998 대한직업환경의학회지 Vol.10 No.4

It has been hypothesized that jobs that have both high psychological demands and low decision latitude("job strain") can lead to musculoskeletal disorder. The objective of this study was to test whether job strain was correlated with the presence of work-related musculoskeletal disorder, especially myofascial pain syndrome(MPS). Information on demographic factors, confounders such as household load and taking care of children or not, and scores for decision latitude, job demand, and social support was obtained by self-administered questionnaire, which had been developed in Korean language, by adopting NIOSH instrument and Extended Karasek Model(16 items). All subjects were also examined by rehabilitation medicine specialists for musculoskeletal disorders. Subjects(n=370) could be categorized into 4 groups, these were, housewives(n=89), shipyard CAD workers(n=89), general female workers(n=79; nurses, insurance counselors, public officials, clerks, etc), and telephone directory assistance operators(n=113). Results from univariate analyses indicated that all demographic factors, all confounders, scores for decision latitude and social support were not associated with the risk of musculoskeletal disorder. However, score for job demand was higher in musculoskeletal disorder cases than others. In subgroup analysis, this association was convinced again, in telephone directory assistance operators. Job strain model showed that the group of telephone directory assistance operators was high-stain group, and OR of musculo skeletal disorder was 2.446(95% C. I. : 1.174, 5.096), when comparing this with the low strain group. In conclusion, job strain is a risk factor for work-related musculoskeletal disorder.

유리혈관화비골 미세이전과 골유착성 임프란트를 이용한 심미 기능적 편측하악골 결손 재건

이종호,배정식,정현주 大韓顎顔面成形再建外科學會 1995 Maxillofacial Plastic Reconstructive Surgery Vol.17 No.3

In this report, a case is presented in which resected mandible was reconstructed immediately with vascularized bone graft and adjunctive implantation of osseointegrated dental implants. The primary was central odontogenic myxoma of mandible extending from symphysis to the left condylar neck. The hemimandibulectomy defect was restored with free fibular flap. Three months after 1st surgery, the transplant received five IMZ implants. The masticatory function was restored with the implant borne denture. The result including facial appearance was very satisfactory.

VDT작업자에서 업무로 인한 정신사회적 스트레스에 대한 인지가 근골격계장애에 미치는 영향

백남종,하미나,조수헌,강대희,백도명,주영수,윤덕로,권호장 大韓産業醫學會 1996 대한직업환경의학회지 Vol.8 No.3

업무에 의한 정신사회적 스트레스가 근골격계 질환의 유병에 미치는 영향을 파악하기 위하여 전화안내원을 대상으로 단면적 조사연구를 수행하였다. 연구 결과 나이, 교육정도, 근무연한, 가사부담 등의 인구학적 변수는 근골격계질환의 유병에 영향을 미치지 않는 것으로 분석되었다. 정신사회적 스트레스 중 업무요구도가 높다고 느끼는 집단에서 그렇지 않은 집단에 비해 근골격계 질환의 유병률이 통계적으로 유의하게 높게 나타났으나 업무재량도나 사회적지지도는 근골격계질환과 유의한 상관관계를 발견할 수 없었다. 그러나 업무요구도는 높고 업무재량도는 낮다고 느끼는 '근무긴장도가 가장 높은 군'은 업무요구도는 낮고 업무재량도는 높다고 느끼는 '근무긴장도가 낮은 군'에 비해 근골격계 질환의 발생위험이 통계적으로 유의하게 높은 것으로 나타났다. 본 연구의 결과는 업무로 인한 정신사회적 스트레스에 대한 인지 정도에 따라 근골격계질환의 유병률이 달라짐을 시사하고 있다. 따라서 작업관련성 근골격계질환의 예방을 위해서는 기존의 인간공학적 접근 이외에 스트레스를 감소시키려는 노력이 동시에 진행되어야 할 것으로 생각한다. A cross-sectional study was conducted to assess the association between perceived occupational psychosocial stress at work and the work-related musculoskeletal disorder(WRMSD) among employees using video display terminals. The study included 111 female telecommunication employees from three companies at ChungBuk province. Cases of WRMSD were defined using symptom questionnaire and physical examination conducted by rehabilitation specialist. Information on demographics, individual factors, and perceived psychosocial stress, were obtained by self-administered questionnaire. For assessing perceived psychosocial stress, we used variables from 'job strain model' proposed by Karasek. Associations between perceived psychosocial stress and WRMSD were assessed by multiple logistic regression models. Forty nine(44% to the total) subjects met our operational definition for WRMSD. Age, seniority, housing load were not associated with WRMSD. Perceived psychosocial stress was associated with WRMSD[odds ratio=3.28, 95% confidence interval: 1.05-10.19]. This study suggests that perceived occupational psychosocial stress is related to the prevalence of WRMSD.

광조사 방식이 복합레진의 중합과 누출에 미치는 영향

박종진,박정원,박성호,박주명,권태경,김성교 大韓齒科保存學會 2002 Restorative Dentistry & Endodontics Vol.27 No.2

The aim of this study was to investigate the effect of light irradiation modes on polymerization shrinkage, degree of cure and microleakage of a composite resin. VIP^™ (Bisco Dental Products, Schaumburg, IL, USA) and Optilux 501^™(demetron/ Kerr, Danbury, CT, USA) were used for curing Filtek^™ Z-250(3M Dental Products, St. Paul., MN, USA) composite resin using following irradiation modes: VIP^™ (Bisco) 200mW/cm^2 (V2), 400mW/cm^2 (V4), 600mW/cm^2 (V6), Pulse-delay (200 mW/cm^2 3 seconds, 5 minutes wait, 600mW/cm^2 30seconds, VPD) and Optilux 501^™ (Demetron/Kerr) C-mode (OC), R-mode (OR). Linear polymerization shrinkage of the composite specimens were measured using Linometer (R&B, Daejeon, Korea) for 90 seconds for V2, V4, V6, OC, OR groups and for up to 363 seconds for VPD group (n=10, each). Degree of conversion was measured using FTIR spectrometer (IFS 120 HR, Bruker Karlsruhe, Germany) at the bottom surface of 2 mm thick composite specimens. V2, V4, V6, OC groups were measured separately at five irradiation times (5, 10, 20, 40, 60 seconds) and Or, VPD groups were measured in the above mentioned irradiation modes (n=5, each). Microhardness was measured using Digital microhardness tester (FM7, Future-Tech Co., Tokyo, Japan) at the top and bottom surfaces of 2mm thick composite specimens after exposure to the same irradiation modes as the test of degree of conversion(n=3, each). For the microleakage test, class V cavities were prepared on the distal surface of the ninety extracted human third molars. The cavities were restored with one of the following irradiation modes: V2/60 seconds. V4/40 seconds, V6/30 seconds, VPD, OC and OR. Microleakage was asessed by dye penetration along enamel and dentin marigns of cavities. Mean polymerization shrinkage, mean degree of conversion and mean microhardness values for all groups at each time were analyzed using one-way ANOVA and Duncan's multiple range test, and using chisquare test for microleakage values. The results were as follows: ·Polymerization shrinkage was increased with higher light intensity in groups using VIP^™(Bisco) : the highset with 600mW/cm^2, followed by Pulse-delay, 400mW/cm^2 and 200mW/cm^2 groups. The degree of polymerization shrinkage was higher with Continuous mode than with Ramp mode in groups using Optilux 501^™ (Demetron/Kerr). ·Degree of conversion and microhardness values were higher with higher light intensity. The final degree of conversion was in the range of 44.7 to 54.98% and the final microhardness value in the range of 34.10 to 56.340. ·Microleakage was greater in dentin margin than in enamel margin. Higher light intensity showed more microleakage in dentin margin in groups using VIP^™ (Bisco). The microleakage was the lowest with Continuous mode in enamel margin and with Ramp mode in dentin margin when Optilux 501^™ (Demetron/Kerr) was used.

중첩 방전을 이용한 CO₂레이저의 동작 특성 : 다중펄스 중첩을 이용한 long 펄스형 CO₂레이저의 펄스 형상 제어 Pulse shape control of pulse CO₂laser using multiple-pulse superposition

정현주,김근용,정용호,정종한,송건주,김희제 부산대학교 생산기술연구소 2001 生産技術硏究所論文集 Vol.60 No.-

본 연구에서는 PIC 원 칩 마이크로 프로세서 기술을 접목시켜, 저전압 측에서 2단 또는 3단의 회로를 능동적으로 중첩시킴으로써, 다양한 펄스폭을 가지는 고전압의 펄스형상을 만들었다. 이렇게 만들어진 다양한 중첩펄스를 현재 산업용 및 의료용으로 많이 사용되고 있는 CO2 레이저에 적용하여 각 단의 스위치의 트리거 지연시간에 따른 레이저 빔의 출력 특성을 고찰하였다. 그 결과 다양한 펄스폭을 가지는 레이저 빔을 얻을수가 있었고 특히, 3단 중첩회로에서 스위칭 지연 시간을 변화시킴에 따라 얻어진 레이저 펄스폭은 최소 약 4ms였고 최대 약 10ms였다. In this study, a variable pulse length, high duty cycle Pulse Forming Network(PFN) is constructed by time sequence. The power supply for this experiment consists of three switching circuits. Each switching circuit uses 2 mesh PFN, a charging circuit, a HV leakage transformer, and bridge rectifier on each transformer secondary. The PFN elements operate at low voltage and drive the primary of HV leakage transformer. The secondary of the transformer has a full-wave rectifier, which passes the pulse energy to the load in a continuous sequence. We investigated laser pulse width of pulsed CO2 laser as various delay time among three switching circuits. As a result, we can obtain various laser pulse width from about 4 to 10ms.