천문과학관 프로그램에 반영된 과학교육과정의 분석

윤광아,최상인,정구송,이호 경북대학교 과학교육연구소 2009 科學敎育硏究誌 Vol.33 No.1

이 연구는 과학 교육과정 중 천문관련 단원의 내용과 천문과학관의 전시내용을 비교 분석하여 천문과학관이 교육과정의 내용과 목표를 얼마나 잘 반영하고 있는지 알아보는데 목적이 있다. 연구 대상은 국내 천문과학관 5곳으로 천문과학관 프로그램 평가도구를 사용하여 프로그램 내용을 평가하고 프로그램 형태를 조사하여 분석하였다. 이 때 사용된 평가도구는 교육부(1997)에서 고시한 과학교육과정 내용과 교육과정 평가원(2000)에서 제시한 성취기준 및 평가기준을 근거로 고안하였다. 이 연구의 결과를 요약하면 다음과 같다. 천문과학관에서는 과학 교육과정 내용 중 천문관련 학습요소를 대부분 반영하고 있었다. 이는 천문과학관이 비형식 교육 기관으로서 학교 과학 교육과 비교적 잘 연계되고 있음을 보여준다. 교육과정 반영비율은 5학년이 가장 높으며, 전시 형태는 패널 형태가 가장 많았다. 평가점수는 반영비율에 비하여 낮았는데 이는 향후 천문과학관의 프로그램을 선정함에 있어 과학 교육과정을 더 충실히 반영하여야 함을 알 수 있다. The purpose of this study is to investigate how much the programs of astronomy museums reflect the contents and objectives of current science curriculums. To attain the aim, comparison and analysis on the museum programs and science curriculum have been made. Five domestic astronomy museums have been selected. The contents and forms of their programs have been studied and appreciated by assessment instruments for astronomy museum programs. The assessment instruments were devised in consideration of both the science curriculums of the Ministry of Education(1997) and the achievement and evaluation criteria of the Korea Institute of Curriculum and Evaluation. The findings of this study are summarized as follows: The astronomy museums reflect most of the learning elements of science curricula concerning astronomy. These results indicate that the astronomy museum as an informal education institute is comparatively well connected to science education. The 5th grade science curriculum reflected mostly on the museum programs, and too many of the astronomy museum programs were in forms of panel exhibition. Science curricula fared well but they failed to reflect the curricular objectives, which resulted m relatively low assessment scores. It is suggested that the findings of this study can be a foundation and act as guidance for selecting and developing astronomy museum programs which include the contents of the science curriculums more substantially.

원형 플레이트 형태에 따른 초음파 부상 장치의 진동특성에 관한 연구

정상화,최석봉,차경래,김현욱,김광호,박준호 한국공작기계학회 2005 한국공작기계학회 춘계학술대회논문집 Vol.2005 No.-

In the semiconductor and optical industry the non-contact transportation is required for reducing the damages. The ultrasonic levitation is the solution of the problem. In this paper, the ultrasonic levitation system and 3 disk-type stator for levitation various object are proposed. The vibration modes of disks are analyzed with FEM and designed with the analysis results. The 3D vibration profiles of the disks are measured by Laser scanning vibrometer for verifying the vibration characteristics of the system. The amplitudes of the disks and the levitation heights of object are measured for evaluating the performance.

직장에 발생한 원발성 악성 흑색종 1예

이석주,김광일,김동호,김홍성,우상민,최덕례,정현용 충남대학교 의과대학 지역사회의학연구소 1997 충남의대잡지 Vol.24 No.1

An extremely rare case of primary melanoma involving only rectum is reported. This 59 year-old male patient was admitted to the hospital because of hematochezia, difficulty of defection. Endoscopic examination and radical excision showed polypoid lesion with ulceration which measured 6x6x3cm in 2cm from the anal verge. Histopathologic, H&E stain and electron microscopic examination(EM) were performed from endoscopic biopsies and excisional mass. We are reporting a case primary rectal melanoma with brief review of literature.

유용성 도료와 수용성 도료의 유해성 비교에 관한 연구 : 자동차 보수용 도료를 중심으로

권은혜,김광식,오정룡,최정근,정윤석,이유진,김은아,송세욱,정호근 한국산업위생학회 2001 한국산업보건학회지 Vol.11 No.1

The purpose of this study is to substitute water-based painting materials for the current solvent-based ones used in motor-repairing process to minimize the exposure of organic solvents to the painters. This study assessed the exposure of organic solvents to the painters using water-based and solvent-based painting materials and compared compositions, painting processes and the health hazards of the application of these alternative painting materials. The results of this study are as follows. 1. solvent-based painting materials used in motor-repairing process consist of various organic solvents, which consist primarily of toluene, xylene, ethyl benzene, ethyl methyl bezene, trimethyl bezene, ethyl acetate, butyl acetate, methyl isobutyl ketone, 2-ethoxy ethanol, 2-ethoxy ethyl acetate and toluene-2.4-diisocianate and the others. These organic solvents are know as health-hazardous substances. But water-based painting materials are high-solid, low-solvent ones and consist of such two organic solvents as 2-butoxy ethanol and 2-heptanone and the others. 2. The painters using solvent-based painting materials in motor-repairing process are exposed to various organic acetate, methyl isobutyl ketone, trimethyl benzene, 2-ethoxy ethanol, and 2-ethoxy ethyl acetate. But the painters using solvent-based ones are only exposed to 2-butoxy ethanol and 2-heptanone. 3. By using water-based painting materials in stead of solvent-based painting materials containing health-hazardous organic solvents, the exposure of such organic solvents in the painter's breathing zone can be largely prevented. 4. This study recommends water-based painting materials as substitutes for the current solvent-based ones used in motor-repairing process to minimize the exposure of organic solvents to the painters.

극초정밀 다축 스테이지의 광소자 정렬에 관한 연구

정상화,차경래,김현욱,최석봉,김광호,박준호 한국공작기계학회 2005 한국공작기계학회 춘계학술대회논문집 Vol.2005 No.-

In recent years, as the demands of VBNS and VDSL increase, the development of kernel parts of optical communication such as PLC(Planar Light Circuit), Coupler, and WDM elements increases. The alignment and the attachment technology are very important in the fabrication of optical elements. In this paper, the optical alignment characteristics of multi-axis ultra precision stage were studied. The alignment algorithms were studied for applying to the ultra precision multi-axis stage. The alignment algorithm is comprised of field search and peak search algorithms. The contour of optical power signals can be obtained by field search and the precise coordinate can be found out by peak search. Two kinds of alignments, such as 1ch. input vs. 1ch. output optical stack, and 1ch. input vs. 8ch. output PLC stacks were performed for investigating the alignment characteristics.

구순구개열 환아에서의 치조골이식

조해성,박재홍,김광철,최성철,이긍호,최영철 대한소아치과학회 2007 大韓小兒齒科學會誌 Vol.34 No.1

치조파열 및 구개열과 같은 선천성 기형은 이환된 환자에게 기능적, 심미적으로 많은 문제점을 야기하므로 정상으로 회복시켜 주는 것은 중요한 문제이다. 장기간 방치될 경우 영양장애, 구강위생 불량, 호흡기 간염, 언어 장애, 악안면 변형, 그리고 정신적인 문제 등이 복합적으로 발생할 수 있다. 따라서 구순구개열 환자의 치료는 여러 전문 치료 분야의 복합적인 접근이 필요하다. 골이식은 구순구개열 환자에 있어 중요한 치과치료 단계이다. 치아의 맹출과 치열의 안정화를 위해 치열궁은 골격손이 없이 완전해져야 한다. 또한 치열궁의 파열이 있는 부위로는 정상적인 교정적 치아이동이 곤란하다. 따라서 구순구개열 환자에 있어 골이식은 광범위하게 적용되고 있는 외과적 술식이다. 치조골을 이식함으로써 치조열은 안정화되고, 견치 또는 절치가 이식부위로 이동할 수 있게 된다. 그리고 골 이식 후, 교정을 통해 치조열 부위의 공간을 폐쇄함으로써 보철 치료 없이 치열을 재형성할 수 있다. 골이식술에는 다양한 이식재료가 사용되었다. 자가골을 이식할 경우 장골이 가장 선호되며, 그 밖에 경골, 늑골, 두개골, 하악골을 이용하기도 한다. 그리고 골이식은 골이식 시기에 따라 일차골이식, 조기 이차골이식, 이차골이식, 만기 이차골이식으로 구분할 수 있다. 이차골이식은 혼합치열기 말경에 시행되는 것을 말하며 가장 좋은 것으로 받아들여지고 있다. 영구 견치가 맹출되기 전에 이차골이식을 시행하면 인접치아의 맹출과 보존에 도움이 된다. 본 증례에서는 치조구개파열 환자의 장골에서 골을 채취하여 골 이식을 시행한 후, 골이 채워진 이식 부위에 인접 치아가 성공적으로 이동하거나 치축이 개선되고 교정치료를 통해 치열궁 배열의 만족스러운 결과를 얻었기에 이를 보고하는 바이다 Cleft lip and palate are congenital craniofacial malformation. Reconstruction of dental arch in patient with alveolo-palatal clefts is very important, because they have many problems in functions and esthetics. Malnutrition, poor oral hygiene, respiratory infections, speech malfunctions, maxillofacial deformity, and psychological problems may be occured without proper treatment during the long period of management of the cleft lip and palate. So the treatment should be managed with a multidisciplinary approach. Bone grafting is a consequential step in the dental rehabilitation of the cleft lip and palate patient. A complete alveolar arch should be achieved of the teeth to erupt in and to form a stable dentition. And the presence of the cleft complicate the orthodontic treatment. Therefore bone grafting in patients with cleft lip and palate is a widely adopted surgical procedure. Grafted bone stabilizes the alveolar process and allows the canine or incisor to move into the graft site. After the bone grafting, orthodontic closure of the maxillary arch has become a common practice for achieving dental reconstruction without any prosthodontic treatment. Various grafting materials have been used in alveolar clefts. Iliac bone is most widely fovoured, but tibia, rib, cranial bone, mandible have also been used. And according to its time of occurrence, the bone graft may be divided into primary, early secondary, secondary, late secondary. Bone grafting is called secondary when performed later, at the end of the mixed dentition. It is the most accepted procedure and has become part of treatment of protocol. A secondary bone graft is performed preferably before the eruption of the permanent canine in order to provide adequate periodontal support for the eruption and preservation of the teeth adjacent to the cleft. In this report, we report here on a patient with unilateral cleft lip and palate, who underwent iliac bone graft. The cleft was fully obliterated by grafted bone in the region of the alveolar process. The presence of bone permitted physiologic tooth movement and the orthodontic movement of adjacent tooth into the former cleft area. Satisfactory arch alignment could be achieved in by subsequent orthodontic treatment.

구간분할 바이너리 제어를 이용한 로봇핸드의 동특성에 관한 연구

정상화,차경래,김현욱,최석봉,김광호,박준호 한국공작기계학회 2005 한국공작기계학회 춘계학술대회논문집 Vol.2005 No.-

In recent years, as the robot technology is developed the researches on the artificial muscle actuator that enable robot to move dextrously like biological organ become active. The widely used materials for artificial muscle are the shape memory alloy and the electro active polymer. These actuators have the higher energy density than the electromechanical actuator such as motor. However, there are some drawbacks for actuator. SMA has the hysterical dynamic characteristics. In this paper the segmented binary control for reducing the hysteresis of SMA is proposed and the simulation of anthropomorphic robotic hand is performed using ADAMS.

초정밀 광소자 정렬 스테이지의 구동 특성에 관한 연구

정상화,차경래,김현욱,최석봉,김광호,박준호 한국공작기계학회 2005 한국공작기계학회 춘계학술대회논문집 Vol.2005 No.-

As the optical communication is introduced to the backbone network at first and becomes a general communication method of network, the demand of kernel parts of optical communication such as PLC(Planar Light Circuit), Coupler, and WDM(Wavelength Division Multiplexing) element increases. The alignment and the attachment technology are very important in the fabrication of optical elements. In this paper, the driving mechanism of ultra precision stage is studied with the aim of optimal design of stage. The travel and the resolution of stage are investigated. The hysteresis of the stage is generated because of PZT actuator. The hysteresis and the inverse hysteresis are modeled in X, Y, and Z-axis motion. The input data of desired displacement to the stage according to input voltage is obtained from the inverse hysteresis equation. In the result of experiments with the input data, the errors due to hysteresis are well compensated.

뇌수막종의 조직학적 Grading과 ^(201)TI SPECT 및 ^(99m)Tc-MIBI SPECT와의 관계에 관한 연구 : A Comparative Study with Pathologic Grading of Meningioma

최광식,김오룡,배장호,김성호,최병연,조수호 대한신경외과학회 1999 Journal of Korean neurosurgical society Vol.28 No.5

The AGN-Bar Connection

Gwang-Ho Lee,Jong-Hak Woo,Myung Gyoon Lee,Changbom Park,Yun-Young Choi,Ho Seong Hwang,Jong-Hwan Lee,Jubee Sohn 한국천문학회 2010 天文學會報 Vol.35 No.2