http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Jae‑Gil Jung,Young‑Hee Cho,Tae‑Young Ahn,Jae‑Hee Yoon,Sang‑Hwa Lee,Jung‑Moo Lee 대한금속·재료학회 2019 METALS AND MATERIALS International Vol.25 No.5
The correlation between primary Si and silicide refinement induced by ultrasonic treatment (UST) of multicomponent Al–Sialloy containing Ti, Zr, V, and P was investigated. UST significantly refined the primary Si phase owing to cavitation-inducedwetting and deagglomeration of MgAl2O4particles. Lowering the UST finish temperature caused deterioration of the degreeof primary Si refinement, instead leading to silicide refinement. Cavitation-induced silicide nucleation on wetted MgAl2O4consumed the MgAl2O4particles, particularly in the case of primary Si nucleation. Similarly, the formation of an AlP phaseon the silicide phase reduced the nucleation efficiency of the AlP phase. Poisoning of the MgAl2O4and AlP phases by thesilicide phase was responsible for the deterioration in primary Si refinement. Room-temperature tensile strength and hightemperatureelongation were increased by UST and were dependent on the size of primary Si.
일차배양된 설치류 호흡기 상피세포로부터의 점액소 분비에 대한 수종 약물의 영향
이충재,석정호,이재흔,허강민,박지선,배소현,노삼길,박상철 충남대학교 의학연구소 2003 충남의대잡지 Vol.30 No.2
1. PKC activator인 PMA는 일차배양 HTSE세포로부터의 뮤신분비를 0.1μM 농도에서 30%, 1μM 농도에서 80% 가량 증가시켰다. 2. 식물 유래 성분으로, flavonoid의 일종인 TFR은 일치배양 HTSE 세포로부터의 뮤신분비를 10μM 농도에서 50%, 100μM 농도에서 80% 가량 증가시켰다. 3. 양이온성 폴리펩티드인 PLL 및 PLA는 일차 배양 HTSE 세포로부터의 뮤신분비를 0.01 - 10μM 농도에서 용량의존적으로 감소시켰다. 4. 결론적으로, 본 연구에서 얻어진 결과들은 새로운 거담제 및 점액용해제나 단백분해 효소제가 아닌 호흡기 류신의 생성/분비를 조절해 줄 수 있는 신개념의 약물을 개발함에 있어 극히 일부분이나마 단서를 제공하고 있다고 하루 수 있을 것이다. In the present study, we tried to investigate whether phorbol myristate acetate(PMA), trihydroxymethoxy-flavanone rutinoside(TFR) and cationic polypeptides significantly affect mucin release(secretion) from cultured hamster tracheal surface epithelial cells. Confluent primary hamster tracheal surface epithelial (HTSE) cells were metabolically radiolabeled with 3H-glucosamine for 24 hr and chased for 30 min in the presence of each agent to assess the effect on 3H-mucin release. The results were as follows : (1) Both PMA and TFR significantly increased mucin release from cultured HTSE cells ; (2) Cationic polypeptides including po1y-L-lysine(PLL, mw 7,500) and poly-L-arginine(PLA, mw 10,800) significantly inhibited mucin release from cultured HTSE cells, in a dose-dependent manner. This finding suggests us that PMA and TFR be further studied for the possible use as mild expectorants and cationic polypeptides might function as a regulator for hyper-secretion of mucus, both by direct acting on airway mucin-secreting cells, during the treatment of chronic airway diseases.
이경재,김주자,최현림,양길승,김호,임상혁,이윤근 大韓産業醫學會 2003 대한직업환경의학회지 Vol.15 No.2
목적: 이 연구는 이황화탄소 취급 사업장에서 근무한 경력이 있는 퇴직 근로자들을 대상으로 이황화탄소에 의한 건강영향을 조사함으로써, 이황화탄소 노출 후의 건강영향 파악 및 이황화탄소 노출 근로자에 대한 건강관리 기준 마련 등에 중요한 기초자료를 제공하고자 하였다. 방법: 이 연구는 우리나라 모 레이온회사에 근무한 경력이 있는 퇴직 근로자 중에서 1998년 12월까지 직업병 여부를 확인하기 위해 건강진단을 신청한 1,702명 중에서 이미 사망한 40명을 제외한 1,662명을 대상으로 하여 이 연구 목적에 대한 설명문을 우편으로 발송하여 참여 의사를 밝힌 258명을 면접대상으로 하여 최종적으로 177명을 분석 대상으로 하였다. 결과: 연구대상자는 남자가 147명, 여자가 30명이었고, 평균 연령은 55.4세이고 입사시 연령은 29.1세였다. 근무부서별로는 고폭로부서에 근무한 군이 156명으로 88%를 차지하였으며, 인정받은 군이 103명(58.2%), 받지 못한 군이 74명(41.2%)이었다. 평균 총폭로지수는 38.96(±31.18)이었고, 인정받은 군에서 받지 못한 군 보다 유의하게 높았고 (p=0.000). 고폭로부서군에서 저폭로부서군보다 높게 나타났다(p=0.000). 퇴사전후 시간에 따른 호소 증상들을 분석한 결과, 퇴사전후 시간 흐름에 따라 호소하는 증상들이 차이는 있지만 호소하는 증상들이 퇴사전과 퇴사후 5년 이내에 비해 퇴사후 5~10년인 경우에는 인정받은 군과 받지 못한 군 간에 유의한 차이를 보이는 호소 증상들이 적어지는 경향을 보였다. 그러나 퇴사 10년 이상인 경우에는 퇴사후 5~10년 이내에 비해 오히려 호소하는 증상들은 많아진 반면, 인정받은 군보다 받지 못한 군에서 유의하게 높았다. 따라서 이는 퇴사후 10년 이상이 되면 그 이전 기간에 비해서 호소하는 증상들은 직업병 인정에 올바른 영향을 미치지 않을 수도 있다고 생각되고 이러한 결과에 영향을 미칠 수 있는 여러 가지 요인들을 생각해 볼 필요가 있다고 생각된다. 인정받은 군에 대해서 직업병 인정시점을 기준으로 인정전후에 호소 증상의 변화를 비교한 결과, 대부분 직업병 인정전에 비해 인정후에 호소하는 증상이 감소하는 경향을 보이고 있어 직업병 인정후에 의료기관으로부터 증상관리가 이루어지는 것이 증상호소를 줄이는 데 기여한 것으로 생각되며 이밖에도 직업병 인정으로 인한 심리적인 보상도 영향을 미칠 수 있을 것으로 생각된다. 직업병 인정여부에 영향을 주는 요인에 관하여 분석한 결과, 총폭로지수와 퇴사후 최종 건강진단을 받을 때까지의 시기가 유의한 요인으로 나타났으며, 퇴사후 직업병 인정을 받을 때까지의 시간에 대한 Cox의 비례위험 회귀분석을 한 결과, 총폭로지수와 입사연령, 고폭로부서의 근무여부가 의미있는 요인으로 나타났다. 결론: 이 연구를 통하여 이황화탄소 취급 사업장에서 근무한 퇴직 근로자들을 대상으로 직업병 인정에 따른 호소 증상을 분석하고 직업병 인정에 영향을 주는 요인을 분석해 봄으로써 이황화탄소 노출에 의한 건강영향을 파악하고 폭로 이후의 증상변화를 예측 관리할 수 있는 자료를 마련하고자 하였으며 이는 이황화탄소 노출 근로자들에 대한 건강관리에 기초자료로 의미를 가질 것으로 생각된다. Objectives: To investigate the chronological subjective symptoms and related factors in exworkers who were occupationally exposed to Carbon disulfide. Methods: One hundred and seventy-seven subjects(147 males and 30 females) were randomly selected among ex-workers and interviewed by well trained doctors, who filled out a structured questionnaire developed by authors on the subjective symptoms. The questionnaire was composed of symptoms in the head and neck, and those of the neuro-psychological, respiratory, endocrine, musculoskeletal, and reproductive systems. Other factors such as general and occupational characteristics including work department, work duration, duration since cessation of exposure, and compensation for occupational disease were also investigated. Results: The mean subject age was 55.4 years. The mean cumulative exposure index (CEI) was 38.96±31.18. CEI was significantly higher in the compensated group(47.61±32.51) than in the non-compensated group(26.81±24.75)(p=0.000). Symptom complaints were significantly higher in the compensated group in all organ systems, and their incidence increased gradually until 10 years after cessation of work, and then decreased. The mean duration for cessation of exposure at the time of compensation was 10.97 years. The significantly different factors between the compensated group and the non-compensated group were total cumulative exposure index and the time interval between the cessation of work and the time of compensation. Conclusion: Our findings suggest that total cumulative exposure index and the time interval between the cessation of work and the time of compensation may be important factors affecting the compensation for occupational disease. Therefore, further studies will be necessary.
이혜승,이재원,한길로,황적준 大韓法醫學會 1998 대한법의학회지 Vol.22 No.2
When we intend to do the personal identification using DNA profiles, it will obviously be better to use as much information as possible. The power of identification is increased by using the genetic marker system such as VNTRs or STRs. Although STRs do not have many alleles per locus as VNTRs, these can be compensated by a large number of loci that are potentially usable. However, it will be more efficient to use a morphic loci. Therefore, prior to choose the genetic marker system of STRs for identification, it is essential to consider the statistical parameters of each STR locus, such as obs-H(observed heterozygosity), exp-H(expected heterozygosity), pM(probability of match), DI(discrimination index), PD(power of discrimination), MEC(mean exclusion chance), MEP(mean exclusion paternity), PIC(polymorphic information content) et al. In this article, we described the exact meaning of statistical parameters for the purpose of identification.
이기동,권승혁,이명희,김숙경,주길재,권중호 한국식품저장유통학회 ( 구 한국농산물저장유통학회 ) 2004 한국식품저장유통학회지 Vol.11 No.1
고품질 참외 농축액을 제조하기 위해 농축공정에서 중요한 변수로 작용하는 가열시간을 달리하면서 제조한 농축물에 대한 관능적 평가를 실시한 결과, 가열 후 맛이 최대평점을 나타낸 조건은 가열온도가 96.63 ℃ 및 가열시간이 14.31 min일 때 였으며, 전반적인 기호도가 가장 높은 조건은 가열온도가 97.18℃ 및 가열시간이 14.55 min 일 때 였다. 가열온도 및 가열시간을 달리하면서 실험한 결과 참외 농축액 제조를 위해서는 가열온도 98℃로, 가열시간 13 min으로 처리하는 것이 적당하였다. This study was carried out to observe the change of organoleptic properties of the juice prepared with various heating temperature and heating time. Organoleptic color showed maximum value at 94.95℃ and 21.63 min and organoleptic aroma showed maximum value at 63.14℃ and 20.38 min. Organoleptic taste showed maximum value at 96.63℃ and 14.31 min and overall palatability showed maximum value at 97.18℃ and 14.55 min The best condition was 98℃(heating temperature) and 13 min(heating time) at oragnoleptic evaluation of oriental melon juice.
이재길 群山大學校 1996 論文集 Vol.23 No.-
Although man’s life in modern industrialised society has become richer and more convenient owing to rapid development of the mechanical civilization, various automations in man’s life such as cars, home automation have decreased the opportunities of the physical training that has weakened the people’s health and physical capabilities. So, this has researched the lack of athlectic facilities, the organizational activation, the development of social athlectic teacher program, and the problems of school athlectics.
작업의 특성에 종속되는 병렬기계의 일정계획을 위한 발견적 기법
이동현,이경근,김재균,박창권,장길상 한국경영과학회 2000 經營 科學 Vol.17 No.1
In the real world, situations that some jobs need be processed only on certain limited machines frequently occur due to the capacity restrictions of machines such as tools, fixtures, or material handing equipment in this paper, we consider n-job, non-preemptive and m parallel machines scheduling problem having two machines group The objective function is to minimize the sum of earliness and tardiness with different release times and due dates The problems is formulated as a mixed integer programming problem The problem is proved to be NP-complete Thus, a heuristic is developed to solve this problem To illustrate its suitability and efficiency, a proposed heuristic is compared with a genetic algorithm and tabu search for a large number of randomly generated test problems in ship engine assembly shop Through the experimental results, it is showed that the proposed algorithm yields good solutions efficiently
李栽吉 군산대학교 1993 群山水産專門大學 硏究報告 Vol.27 No.1
The health care consists fo the health exemination, preventive medicine, therapeutics epidemic prevention, first-aid treatment, etc. This thesis studies the first-aid treatment for the bone-inframmation in the joints of the body. Also, this thesis, being on the basis of the acupuncture and moxacatery, studies the treatment effects of the finger-pressure therapy for the bone-inflammation in the shoulder, finger, ankle, and the disjoint of the shoulder as a first- aid treatment.
미소원공결함을 갖는 자동차 전륜구동 축재의 피로수명 예측
이동길,오환교,정재강 朝鮮大學校 機械技術硏究所 1998 機械技術硏究 Vol.1 No.1
본 연구에서는 현재 생산되고 있는 자동차의 전륜 구동축재료 S43C와 S50C를 대상으로 회전굽힘피로시험을 통해 고주파열처리와 온도조건에 따른 피로크랙 전파거동을 고찰하고, Nisitani가 제안한 역학적 변수에 의해 재료상수를 구한 후 그 적용성을 검토해 보았다. 비열처리재 S43C 및 S50C의 피로한도는 각각 98.1MPa, 107.9MPa이었으며, 열처리재는 각각 147.1MPa, 156.9MPa로서 열처리 후 두 재료 모두 피로한도가 약 49MPa씩 증가하였으며, 저온(-30℃)에서의 피로수명은 상온(25℃)에서보다 두 재료 모두 비열처리재는 약 110%, 열처리재는 약 120% 증가하였다. 또한 본 재료에 실험으로부터 얻어진 재료상수를 Nisitani의 피로크랙전파속도 예측식에 적용하여 피로수명을 예측한 결과 고주파 열처리 여부와 실험온도 조건에 관계없이 약 5% 내외의 낮은 오차를 보이며 잘 일치함을 알았다. In this study, the rotary bending fatigue test was carried out with two kinds of materials, S43C and S50C, using in the front engine and front drive shaft of vehicle. The specimens were heat-treated by high frequency induction method and tested at +25℃ and -30℃ in order to look over the influence of the heat treatment and the temperatures. The mechanical factor, C(2a)p, proposed by Nisitani was employed in the present study to compare the results of fatigue life obtained from experiment and prediction. The fatigue limit of the as-received specimens S43C and S50C were 98.1MPa and 107.7MPa, and that of the heat-treated S43C and S50C were shown 147.1MPa and 156.9MPa respectably. It means that the fatigue limit was increased about 49MPa by high frequency heat treatment. Fatigue lifes of the specimens tested at low temperature(-30℃) showed about 110% for as-received, 120% for heat-treated higher than at room temperature(25℃). It was found the crack length at onset or final fracture tested at low temperature was shorter than the crack length at room temperature(+25℃). The fatigue lifes were predicted with an equation of the fatigue crack propagation proposed by Nisitani, d(da/dN)=C(2a)p, the results were found to be within 5.0% error by comparison with experimented results.