온도자극이 충전된 치질에 미치는 영향

김재곤,노용관,이영수,양정숙,백병주 大韓小兒齒科學會 1999 大韓小兒齒科學會誌 Vol.26 No.2

본 연구에서는 수복에 따른 치질 내부 구조물의 열적변화를 평가하기 위하여 와동이 형성된 인공 치아모형에 아말감 충전, 아말감과 스테인레스 스틸관 수복, 금인레이와 금관수복, ZOE 이장 및 아말감 충전등으로 수복한 후 온도변화를 관찰하였다. 각 실험군에 4℃와 60℃로 2초와 4초 동안 자극을 가한 후 치아내부의 온도분포를 2차원적으로 분석하였고, 치수 중앙부에서 외측으로 층을 형성하여 3차원적인 해석을 시행한 결과, 다음과 같은 결론을 얻었다. 1. 4℃의 자극이 2초간 가해진 아말감 충전 경우, 아말감 충전과 스테인레스 스틸관을 장착한 경우에서는 1℃ 내외의 차이를 보였으며, 치수와 상아질 경계면에서 3초 경과시에 29℃까지 급격한 온도 하강을 보였으며 9초 후에 25℃에 도달하였다. 또한 금으로 수복한 경우에서는 3초 후 25℃까지 하강하여 그 온도를 유지하였으며, ZOE 이장 경우에서는 최저온도가 4℃ 이상 높게 나타났다. 2. 4℃ 자극을 4초간 가한 경우에서는 9초 후에서 2초 자극시보다 2-3℃ 낮았으며, 금 수복 경우에는 5초 후에 21℃의 최저온도를 보인 후 점차 회복되었다. 3. 아말감 충전 및 스테인레스 스틸관을 같이 장착한 경우에 60℃, 2초간 자극에는 3초 후 40℃의 온도로서 상승하였으나 9초 후에 30℃로 하강 하였으며, 금 수복에서는 2초 후 41℃까지 온도가 상승하였고, 9초 후 28℃를 보여 13℃의 차이가 있었다. ZOE 이장 경우에는 온도차이가 5℃로서 안정된 양상을 보였다. 4. 60℃, 4초 자극에 대한 아말감 충전 및 스테인레스 스틸관을 같이 장착한 경우에서 5초 후 42℃, 9초후 35℃를 보였으나 금 수복 경우에서는 3초 후 49℃, 9초 후 31℃의 온도변화를 나타내었다. 5. 3차원 분석에서 치수 중앙부에서 멀어질수록 온도변화가 심하였다. The dental structure substituted by restorative materials may produce discomfort resulting from hot or cold stimuli. To investigate the effects of this stimuli on the human teeth, thermal analysis was carried out by calculation of general heat conduction equation in a modeled tooth using numerical method. The method has been applied to axisymmetric and two-dimensional model, analyzing the effects of constant temperature 4℃ and 60℃. That thermal shock was provided for 2 seconds and 4 seconds, respectively and recovered to normal condition of 20℃ until 10 seconds. The thermal behavior of tooth covered with a crown of gold or stainless steel was compared with that of tooth without crown. At the same time, the effects of restorative materials(amalgam, gold and zinc oxide-eugenol(ZOE)) on the temperature of PDJ(pulpo-dentinal junction) has been studied. The geometry used for thermal analysis so far has been limited to two-dimensional as well as axisymmetric tooth models. But the general restorative tooth forms a cross shaped cavity which is no longer two-dimensional and axisymmetric. Therefore, in this study, the three-dimensional model was developed to investigate the effect of shape and size of cavity. This three-dimensional model might be used for further research to investigate the effects of restorative materials and cavity design on the thermal behavior of the real shaped tooth. The results were as follows: 1. When cold temperature of 4℃ was applied to the surface of the restored teeth with amalgam for 2 seconds and recovered to ambient temperature of 20℃, the PDJ temperature decreased rapidly to 29℃ until 3 seconds and reached to 25℃ after 9 seconds. This temperature decreased rather slowly with stainless steel crown, but kept similar temperature within 1℃ differences. Using the gold as a restorative material, the PDJ temperature decreased very fast due to the high thermal conductivity and reached near to 25℃ but the temperature after 9 seconds was similar to that in the teeth without crown. The effects of coldness could be attenuated with the ZOE situated under the cavity. The low thermal conductivity caused a delay in temperature decrease and keeps 4℃ higher than the temperature of other conditions after 9 seconds. 2. The elapse time of cold stimuli was increased also until 4 seconds and recovered to 20℃ after 4 seconds to 9 seconds. The temperature after 9 seconds was about 2-3℃ lower than the temperature of 2 seconds stimuli, but in case of gold restoration, the high thermal conductivity of gold caused the minimum temperature of 21℃ after 5 seconds and got warm to 23℃ after 9 seconds. 3. The effects of hot stimuli was also investigated with the temperature of 60℃. For 2 seconds stimuli, the temperature increased to 40℃ from the initial temperature of 35℃ after 3 seconds of stimuli and decreased to 30℃ after 9 seconds in the teeth without crown. This temperature was sensitive to surface temperature in the teeth with gold restoration. It increased rapidly to 41℃ from the initial temperature of 35℃ after 2 seconds and decreased to 28℃ after 9 seconds, which showed 13℃ temperature variations for 9 seconds upon the surface temperature. This temperature variations were only in the range of 5℃ by using ZOE in the bottom of cavity and showed maximum temperature of 37℃ after 3 seconds of stimuli. 4. In case of 4 seconds hot stimuli, the temperature increased 42℃ after 5 seconds and decreased 35℃ after 9 seconds in the teeth without crown. But in gold restoration, showed 49℃ after 3 seconds and 31℃ after 9 seconds, temperature variation was up to 18℃. Temperature variation of ZOE base case was only 5℃. 5. In three-dimensional analysis, we could find higher and lower thermal distribution pattern at the outer layer.

敎育大學 科學敎育의 內容構成에 관한 硏究

金炳業,金在慶,孫錫洛 大邱敎育大學校 科學敎育硏究所 1984 과학·수학교육연구 Vol.9 No.-

<Summary> The paper attempts to construct the contents of science subject of teacher's college in order to train students as competent elementary science teachers. Within the current curiiculum, we gave proceeded this study. The conclusions we have come to are as follows. 1) The objective of the scieuce education in teacher's college shoule have students acquire high level scientific literacy and competent teaching method through the conclusive understanding of science. 2) The competence and ability science teacher must acquire are the undertanding about the nature of science, having the inquiry attitude and the method of teaching elementary science. 3) In the construction of the contents avout the science subject in teacher's college the following considerations should be needed. ① "The natural science" subject in the liveral arts course. The contents of this subject should include the fundamental concepts and the inquiry method of science centered on the nature subject in the elementry school. At the same time the learning should be proceeded along with the way these concepts are formed by human thought. ② "The nature subject education" in the major course. This subject is divided into two sub-subjects which call for "the teaching method" and " the sutdy of teaching materials". In the current curriculum, the nature and contents of these two sub-subjects are not prescrived clearly. This paper attempts to prescribe these nature and contents. The teaching method should be the general rules and theories concerning all the elementary science including the nature subject. The study of teaching material should be done according to the curriculum and textbook of the individual elemenary science, the nature subject.

여러가지 수복물의 polishing조건에 따른 치수 온도변화

김재곤,이승영,박종하,백병주,양종숙 大韓小兒齒科學會 1999 大韓小兒齒科學會誌 Vol.26 No.2

수복물의 연마의 중요성에 대하여 많은 연구들이 이루어져 왔으며, 이는 수복물의 금속성질의 개선, 변연적합성의 증가 그리고 치태축적의 감소 등을 이유로 시행된다. 그러나 불행하게도 수복물에 대한 연마시 열의 발생으로 인하여 치수부위에 손상을 초래하므로 열의 발생을 최소화하려는 노력이 뒤따라야 할 것이다. 이에 본 연구에서는 수복물의 연마시 회전속도의 차이, 냉각제의 적용 유무, 여러 종류의 수복물의 차이, 간헐적인 연마와 연속적인 연마의 차이 그리고 잔존 상아질의 두께의 정도에 따른 치수내부에서의 열의 변화를 알아보기 위하여 발거된 구치에 5급 와동을 형성한 후 복합레진(Z100, 3M co), resin-mod-ified GLC(Dyract, Fuji II LC), 그리고 아말감(Degussa)등으로 충전하였으며, 다양한 조건에서의 연마를 시행, 치수내부에서의 열의 변화를 측정하여 다음과 같은 결과를 얻었다. 1. Amalgam을 건조한 상태에서 연마시 다른 재료에 비해 큰 치수내 온도 상승을 보였다.(P<0.05). 그러나 Z100, Dyract, Fuji II LC간에는 간헐적 수복물 연마와 연속적인 수복물 연마 모두 어떤 경우든 유의차가 없었다.(P>0.05). 2. 같은 조건으로 연마를 시행했을 때, 간헐적인 연마보다 연속적인 연마를 한 경우가 치수내 온도가 더 크게 상승하였다.(p<0.01). 3. 아말감과 Dyract에 있어서는 잔존 상아질의 차이에 따른 치수내 온도변화에 유의한 차이를 보였으나(P<0.01), Fuji II LC에 있어서는 유의성이 없었다(P>0.01). 4. 냉각제의 유무에는 관계없이 어떤 경우든 시간에 따른 온도 상승을 보였다. 그러나, 냉각제를 사용한 경우가 냉각제를 사용하지 않은 경우에 비해 온도 상승값이 훨씬 작았다.(P<0.01) The importance of finishing and polishing the restoration has been described by several authors. The final step provides for improved metallurgical properties, better marginal adaptation, reduced plaque accumulation. Unfortunately, finishing of the restorations can produce damage from temperature rises at the pulpal wall. The aim of this study was to determine the changes in temperature can be occurred during the use of finishing and polishing instruments under a variety of conditions. ; with or without a water coolant, intermittent or continuous operation, high or low rotation speed, remaining dentin thickness, and various restorative materials. Class V preparations were cut on extracted molars and restored with composite resin(Z 100), resin-modified glass ionomer cements(Dyract, Fuji II LC), and amalgam. Finishing was done with aluminum oxide coated disc(Sof-lex polishing disc, 3M, USA). The following results were obtained. 1. The rise of temperature during polishing of amalgam restorations was the highest among the all experimental groups except polishing with water coolant(P<0.05). However, there were no statictical differences in temperature rises between Z 100, Dyract and Fuji II LC(P>0.05). 2. The intrapulpal temperature was greatly influenced by the applied time, and intermittent polishing was showed significantly lower temperature rises than continuous polishing(p<0.01). 3. The intrapulpal temperature was increased according to the application of polishing regardless of using water coolant. However, polishing with water coolant showed significantly lower temperature in the pulp than not used water coolant(P<0.01).

탄화수소를 환원제로 하는 배연 탈질공정에서 금속이온교환된 ZSM-5 촉매들의 촉매활성 비교연구

김재천,한상현,신병선,정석진 경희대학교 산학협력기술연구원 1998 산학협력기술연구논문집 Vol.4 No.-

In this study, in order to make up its drawbacks in the Cu-ZSM-5 catalytic system, some of transition metals or alkaline earth metals were cocation-exchanged in Cu-ZSM-5. Among various cocation-ion-exchanged XSM-5 catalysts, Mg/Cu-ZSM-5 was found to be the most active and durable in NOx reduction even with high oxygen content as well as in the presence of water vapor. The role of Mg in ZSM-5 is supposed to prevent the dealumination of aluminium ions the in supercage even at harsh hydro-thermal conditions, and also it seems to stabilize the Cu ions in the structure. In order to prepare commercially available catalysts, Mg/Cu-ZSM-5 catalysts were wash-coated on the surface of honeycomb type monolith, and tested in terms of catalytic activities. As a results, it was found that the catalyst prepared by the wash-coating showed satisfactorily high NOx conversion for the practical in the SCR process.

교육사회학의 연구 동향 분석

김경식,권민석,김병규,박형진,송승면,황정희 경북대학교 사범대학부속 중등교육연구소 2005 중등교육연구 Vol.53 No.3

한국, 일본, 미국, 영국의 교육사회학 학술지 논문을 주제별 내용분석을 통해 각각의 하위개념을 도출하고 개념의 유사성의 정도에 따라 다시 상위개념으로 분류하여 교육사회학의 주요 연구영역을 탐색하였다. 학술지에서 가장 많이 다루어진 영역은 교육과 평등/지위획득, 교육정책과 제도, 교육사회학의 성격/이론, 학교사회와 학업성취, 페미니스트(여성), 청소년 문제와 문화, 교사교육/교직사회, 공교육의 문제/교육개혁 등의 순으로 나타났다. 특히 교육정책과 제도 문제는 한국과 일본에서, 교육사회학의 발달과 정체성 문제는 영국에서, 학업성취 관련 내용은 미국에서 가장 많이 다루어졌다. The purpose of this study was to explore the research trend in sociology of education. To conduct the purpose of this study, the Korean Journal of Sociology of Education(KJSE), the Journal of Educational Sociology(JES), Sociology of Education(SOE), and Bitish Journal of Sociology of Education(BJSE)'s articles were analyzed. The findings of this study were as follows: First, though the major categories(major domains) of research areas were a few differences among nations, they were education & equality, educational policy, sociology of education theory, school society & academic achievement, feminism, adolescent problem & culture, teacher education, school crisis & education reform, course education, sociology of curriculum, and etc. Second, the most frequent research area was the educational policy & system problems in Korea and Japan; the development and identity of sociology of education in Britain; The school society & academic achievement in U.S.A.

大學生들의 國外留學에 關한 意識 調査硏究

金鍾石,李秉承 충남대학교 학생생활연구소 1985 學生生活硏究 Vol.13 No.-

Cariostat를 이용한 아동의 우식활성에 관한 임상적 연구

김재곤,이영수,양정숙,양연미,백병주 大韓小兒齒科學會 1998 大韓小兒齒科學會誌 Vol.25 No.3

The purpose of the study was to determine the ability of the caries activity test, 'Car-iostat'to identify preschool children with dental caries, The subjects of this study were 76 children of 3 to 5 years of age. Oral examination was carried out to out to assess the caries experience using a mirror and explorer. In all subjects buccal plaque samples were obtained, incubated. and scored as the manufacturer's instructions for the cariostat test. statistical analyses were used with the Crosstabulation. The test group exhibited mean dft index 5.21, while 27.63% of subjects were caries free and had no restorations. The sensitivity of the Cariostat test was found to be 98.8% while the specifioity was found to be 19.05% The results showed that caries activity measured by visual reading was highly significant to the Cariostat score and dft index(P<0.001). the Cariostat method has indicated the future possible occurrence of caries. The use of this method is meant to require in the caries prevention program.

공학도의 의사소통과 리더십, 팀웍을 배양하기 위한 공학 소양교육 방법

김병재,김석우,최재선 明知大學校 産業技術硏究所 2004 産業技術硏究所論文集 Vol.23 No.-

Engineering performance skills such as communication, leadership, and teamwork are essential for undergraduate students. This thesis proposes and integrated curriculum for engineering students to teach communication, leadership, and teamwork skill for one semester(16 weeks). When an engineering college is to develop such an integrated curriculum based on educational objectives, the college should emphasize performance skills. That would bring some synergy effect in education.

치아종에 대한 증례보고

백병주,김재곤,주훈,양정숙 大韓小兒齒科學會 1995 大韓小兒齒科學會誌 Vol.22 No.2

Odontomas are most common benign odontogenic tumors, and have been defined as "mixed odontogenic tumor composed of epithelial and mesenchymal cells". Many authors are considered to be malformations rather than neoplasm. The etiology of odontoma is uncertain but hypothesized to involve local trauma, infection, inheritance or mutant gene interference with genetic control of tooth development. The recent classification by WHO divides odontoma into 2 groups such as complex odontoma and compound odontoma. Odontomas are usually asymptomatic and are usually discovered on routin dental radiographs. The most frequently encountered symptoms are impacted tooth and swelling. Radiographically, it appears as an irregular mass of calcified material surrounded by a radiolucent band. The possibility of an ameloblastic odontoma must be kept in mind during the differential diagnosis. Surgical excision and histopathological examination of the lesions is recommended. Following removal of the odontoma closing the incision and allowing the tooth to erupt spontaneously was considered. Hitchin suggested that spontaneous eruption may not occur if the root of the impacted tooth is completed. Failure to erupt would require a 2nd surgical exposure to place an orthodontic attachment. This report presents the result in treating patients, whose chief complaint was delayed eruption of teeth due to odontoma.

일측 하퇴 의족 착용자의 절단단 길이에 따른 보행특성

조병모,변주남,김기순,김석산,박종 조선대학교 부설 의학연구소 1999 The Medical Journal of Chosun University Vol.24 No.1

This report studied 31 male patients who were in one hospital in Kwangju or came to a prosthesis clinic and are 15 normal control group to analyze the gait characteristics according to the stump length in the prosthesis users with the unilateral below-knee amputations. The patient group was divided into a short stump subgroup of 13 patients and a long stump subgroup of 18 patients according to the stump length, the control group was randomly sampled from 15 males who have similar age, height and weight to the experimental group. The results of analysis are summarized as follows. 1. There were no significant statistical differences of the general characteristics between patient and control groups and there was no difference of characteristics by patient groups except the mean gait distance a day. 2. Of 33 patients with amputation, 18 patients (57.8%) had phantom pain and 25 cases (80.6%) had neuroma. 3. Gait velocity, stride length of the affected side, step length of the sound side and base support among gait characteristics show a significant difference according to the stump length in the state excluding the effects of other factors (p<05) and the group with long stump showed closer gait characteristics to normal persons than those with short stumps. In conclusion, among the patients of unilateral below-knee amputations, the stump length affects the gait characteristics such as gait velocity, stride length, step and base of support and it is found that as the stump length gets longer, it shows the similar characteristics to gait characteristics of normal persons and long unilateral below-knee amputation can secure better gait characteristics.