http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
황정준,신영현,심효섭,김도현,김동근 한국품질경영학회 2023 품질경영학회지 Vol.51 No.4
Purpose: This study aims to estimate the demand for various public parking lots in Seoul by clustering similar demand types of parking lots and predicting the demand for new public parking lots. Methods: We examined real-time parking information data and used time series clustering analysis to cluster public parking lots with similar demand patterns. We also performed various regression analyses of parking demand based on diverse heterogeneous data that affect parking demand and proposed a parking demand prediction model. Results: As a result of cluster analysis, 68 public parking lots in Seoul were clustered into four types with similar demand patterns. We also identified key variables impacting parking demand and obtained a precise model for predicting parking demands. Conclusion: The proposed prediction model can be used to improve the efficiency and publicity of public parking lots in Seoul, and can be used as a basis for constructing new public parking lots that meet the actual demand. Future research could include studies on demand estimation models for each type of parking lot, and studies on the impact of parking lot usage patterns on demand.
FEC기능을 추가한 AMR-WB 음성 부호화기를 이용한 음성 패킷 전송
황정준,이인성 대한전자공학회 2003 電子工學會論文誌-TC (Telecommunications) Vol.40 No.11
본 논문에서는 인터넷 환경에서 실시간 음성 통신을 가능하게 하기 위해 부가 정보를 이용한 손실 패킷 복구 방법이 첨가된 전송 방법을 제시한다. 3GPP에서 기본적으로 이동 통신 환경에서의 사용을 위해 표준화 되었고, 인터넷 환경에서의 사용을 위해 최근에 ITU-T에서 개선된 AMR-WB 음성 부호화기를 사용하였다. 인터넷과 같은 패킷 교환망 서비스에서의 패킷손실은 음질 저하를 유발하고 실시간 통신이 불가능하도록 한다. 따라서 본 논문에서는 단일 손실 발생시에 FEC(Foward Error Correction) 방법을 적용하였고 연속 손실의 경우에는 오류 은닉을 하였다. 또한 손실율에 따라 AMR-WB(Adaptive Multi-Rate Wideband) 부호화기의 특성을 이용하여 여러 모드로 동작 하는 방법을 제시한다. 인터넷 환경의 실험을 위해 길버트 모델을 이용하였다. 손실율을 변화시키며 AMR-WB 23.05 kbit/s 모드로 전송하는 방법과 SNR(Signal to Noise Rate)과 MOS(Mean Opinion Score) 측정을 통해 비교하였다. 실험한 결과 손실율이 30% 에서도 SNR은 9.8dB MOS 값은 3.0정도의 통신 가능한 높은 음질을 보였다. This paper suggests the packet loss recovery method to communicate in real time in the Internet. To reduce the effects of packet loss, Forward Error Correction (FEC) that adds redundant information to voice packets can be used. Adaptive Multi Rate Wideband(AMR-WB) codec which is recently selected by the Third Generation Partnership Project(3GPP) for GSM and the third generation mobile communication WCDMA system and has also been standardized in ITU-T for providing wideband speech services is used. The major cause for speech qualitly degradation in IP-networks is packet loss. So, We recovered single lossy packet by using FEC method and concealed continued errors. The proposed scheme is evaluated in the Gilbert Internet channel model. The high quality of audio maintained up to 30% packet loss.
850℃에서의 Alloy 617 용접재의 저사이클 피로 특성
황정준(Jeong Jun Hwang),김선진(Seon Jin Kim),김우곤(Woo Gon Kim),김응선(Eung-Seon Kim) 대한기계학회 2017 大韓機械學會論文集A Vol.41 No.3
Alloy 617은 초고온가스로(VHTR)의 중간열교환기(IHX)의 유력한 후보 재료 중의 하나이다. 850℃의 고온에서 Alloy 617 용접재의 저사이클 피로 거동을 고찰하기 위하여, 완전 양진 변형률제어 피로시험이 0.6에서 1.5%의 전변형률범위에서 수행되었다. 용접재 시험편은 V-그루브 형상의 가스텅그스텐아크 용접한 용접 패드로부터 가공되었다. 피로수명은 전변형률범위가 증가할수록 감소하였다. 모든 실험조건에서 Alloy 617 용접재 시험편의 반복 응력 반응 거동은 초기 수 사이클에서 반복 변형률 경화현상을 나타내었다. 또한 모든 피로 균열의 발생과 전파는 입내파괴의 파손 모드를 보였다. Alloy 617 is one of the primary candidate materials to be used in a very high temperature reactor (VHTR) system as an intermediate heat exchanger (IHX). To investigate the low cycle fatigue behavior of Alloy 617 weldments at a high temperature of 850℃, fully reversed strain-controlled fatigue tests were conducted with the total strain values ranging from 0.6~1.5%. The weldment specimens were machined using the weld pads fabricated with a single V-grove configuration by gas tungsten arc welding (GTAW) process. The fatigue life is reduced as the total strain range increases. For all testing conditions, the cyclic stress response behavior of the Alloy 617 weldments exhibited the initial cyclic strain hardening phenomenon during the initial small number of cycles. Furthermore, the overall fatigue cracking and the propagation or cracks showed a transgranular failure mode.