SrWO$_4$가 첨가된 (Sr$_{1-x}$Bax)(Mg$_{1/3}$Nb$_{2/3}$)O$_3$의 마이크로파 유전특성

허훈,박찬식,김경용,변재동,Heo, Hoon,Park, Chan-Sik,Kim, Kyoung-Young,Byun, Jae-Dong 한국세라믹학회 1999 한국세라믹학회지 Vol.36 No.3

SrWO4가 첨가된 (Sr1-xBax)(Mg1/3Nb2/3)O3의 마이크로파 유전특성에 관하여 조사하였다. 관찰된 조성영역에서 Sr(Mg1/3Nb2/3)O3과 Ba(Mg1/3Nb2/3)O3은 (Sr1-xBax)(Mg1/3Nb2/3)O3고용체를 형성하고 SrWO4의 첨가는 고용체의 소결성을 향상시켜 소결온도 155$0^{\circ}C$에서 상대밀도 97% 이상을 얻었다. 소결한 시편의 EDS분석결과, SrWO4의 첨가량이 많은 시편에서 2차상이 존재하는 것을 알수 있었다. 순수한 Sr(Mg1/3Nb2/3)O3에 SrWO4를 0.01 mole첨가하여 1550~1$600^{\circ}C$에서 소결한 시편의 유전특성은 $\varepsilon$r 30, Q$\times$fo$\geq$55000,$ au$f -23 ppm/$^{\circ}C$이었다. 0.01 mole SrWO4가 첨가된 (Sr1-xBax)(Mg1/3Nb2/3)O3 고용체의 유전율과 온도계숙가 x에 따라 점차적으로 계속 증가하였고 Q$\times$fo는 x$\leq$0.25에서 x에 따라 감소하고 x$\geq$0.3에서 다시 증가하였다. (Sr0.65Ba0.35)(Mg1/3Nb2/3)O3+0.01SrWO4의 조성을 갖는 시편에서 $\varepsilon$r 34.4, Q$\times$fo$\geq$55000,$\tau$f 0 ppm/$^{\circ}C$이었다.

치과 진료 시뮬레이션을 위한 3차원 치아의 재구성 시스템

허훈,최원준,채옥삼,Heo, Hoon,Choi, Won-Jun,Chae, Ok-Sam 한국정보처리학회 2004 정보처리학회논문지B Vol.11 No.2

Recently, the dental information systems were rapidly developed in order to store and process the data of patients. But, these systems should serve a doctor a good quality information against disease for diagnostic and surgery purpose so as to success in this field. This function of the system it important to persuade patients to undergo proper surgical operation they needed. Hence, 3D teeth model capable of simulating the dental surgery and treatment is necessary Teeth manipulation of dentistry is performed on individual tooth in dental clinic. io, 3D teeth reconstruction system should have the techniques of segmentation and 3D reconstruction adequate for individual tooth. In this paper, we propose the techniques of adaptive optimal segmentation to segment the individual area of tooth, and reconstruction method of tooth based on contour-based method. Each tooth can be segmented from neighboring teeth and alveolar bone in CT images using adaptive optimal threshold computed differently on tooth. Reconstruction of individual tooth using results of segmentation can be manipulated according to user's input and make the simulation of dental surgery and treatment possible. 최근 치과 분야의 정보화는 환자자료와 진단영상의 취득과 관리 등을 포함하는 통합 정보화시스템으로써 급속히 발전되었다. 이러한 시스템이 성공하기 위해선 의사가 정확하게 질환을 진단하고 치료하도록 양질의 정보를 제공하며 환자들에게 필요한 고가의 치료를 효과적으로 설득할 수 있는 기능이 확보되어야 한다. 이러한 측면에서 치과분야 시뮬레이션이 가능한 3차원 재구성된 치아모델이 필요하다 치과분야의 치아조작은 대부분 개별 치아 단위로 이루어진다. 따라서 3차원 치아 재구성 시스템은 개변치아의 영역분할과 치아에 맞는 재구성기술이 요구된다. 본 논문에서 적응 최적 임계화를 사용한 치아단위 영역분할 방안과 분할된 경계를 사용한 윤곽선 기반방식의 치아 재구성방안을 제안한다. 즉, 연속된 CT영상에서 개별치아 영역을 정확히 분할하기 위해 슬라이스마다 적응적으로 결정된 최적의 임계치를 사용하여 각 치아를 인접한 이웃 치아와 치조골로부터 분리한다. 분할결과는 3차원 재구성되어 개별 치아를 조작하는 사용자의 입력에 따라 3차원 공간상에서 치아의 이동, 발거 동작을 바탕으로 치과 진료의 시뮬레이션을 가능하게 한다.

양측성 및 편측성 이악물기시 상하악골 응력변화 및 변위에 관한 3차원 유한요소법적 연구

허훈,강동완,Heo, Hoon,Kang, Dong-Wan 대한치과보철학회 1999 대한치과보철학회지 Vol.37 No.1

This study is to analyze the stress and displacement on the jaws during the bilateral and unilateral clenching task on three dimensional finite element model of the dentated skull. For this study, the computed tomography(G.E.8800 Quick, USA) was used to scan the total length of human skull in the frontal plane at 1.9mm intervals. The CAD data were extracted from the tomograms through digitizer(Summa Sketch III, USA) and then reconstructed by means of the spline method in the CAD program. In this project, a commercial software I-DEAS(Master Series ver-sion 3.0, SDRC Inc, USA) was used for three-dimensional stress analysis on the finite element model. which consists of articular disc, maxilla, mandible, teeth, periodontal ligament and cranium. The results are as follows. ; 1. During the bilateral clenching, each major muscle forces caused high stresses on various areas of skull: masseter muscle on articular disc and teeth ; temporal muscle on mandible and periodontal ligament ; medial pterygoid muscle on the temporomandibular joint. During the unilateral clenching, masseter muscle induced the maximum stress ; medial pterygoid muscle the minimum stress. 2. During the bilateral clenching, higher compressive stresses on articular disc were generated by the masseter muscle and higher deformation occurred on the most front outer sites. And during the unilateral clenching, temporal muscle and medial pterygoid muscle exerted their forces to twist temporomandibular joint area of the balancing side and induced a higher compressive stresses on the front outer sites of articular disc. 3. During the bilateral clenching, the masseter muscle bended the mandible outwardly, and then caused tensile stresses on the lingual surface of mandibular symphysis. And the medial pterygoid muscle caused tensile stresses on the labial surface of mandibular symphysis. 4. When each muscles were simultaneously applied on jaws, a high stress and displacement took place on mandible rather than on the maxilla. Also, a high stress and displacement took place during the unilateral clenching rather than during the bilateral clenching.

위암에서 조직학적 특징에 따른 혈청 E-cadherin의 농도

허훈,송교영,김진조,진형민,김욱,박조현,박승만,임근우,박우배,김승남,전해명,Hur, Hoon,Song-Gyo-Young,Kim, Jin-Jo,Chin-Hyung-Min,Kim, Wook,Park, Cho-Hyun,Park, Seung-Man,Lim-Keun-Woo,Park, Woo-Bae,Kim, Seung-Nam,Jeon, Hae-Myoung 대한위암학회 2004 대한위암학회지 Vol.4 No.3

Purpose: While E-cadherin in normal cells induces calciumdependent cell-cell adhesion, in malignant cell, it plays a role in invasion and metastasis with a reduction of adhesion. Serum soluble E-cadherin is a result of the reduction of the cellular E-cadherin molecule and is found in the circulation of normal individuals, but it is particularly known to be increased in patients with malignancies. Accordingly, through checking the level of serum soluble E-cadherin in patients with gastric cancer and analyzing it in the view of clinicopathology, we investigated whether serum soluble E-cadherin could be translated into a clinicopathologic esult and used as a tumor marker. Materials and Methods: The investigation targeted 88 patients who had been diagnosed as having gastric cancer by the Department of Surgery, St. Mary's Hospital, from October 1, 2002, to July 30, 2003, and who had under gone performed surgery. We measured the level of preoperative serum E-cadherin in the 88 patients by unsing ELISA. Among them, we collected gastric cancer tissues from 54 patients and executed immunohistochemistry for E-cadherin. The samples were compared with normal tissues in terms of both serum E-cadherin level and immunohistochemistry level, as well as with other clinicopathologic factors. Result: The mean serum E-cadherin level of the 88 patients was 4368.7 ng/ml and was significantly higher than the level in 12 normal control patients, 3335.5 ng/ml (P=0.016). In terms of clinicopathology, the serum level of E-cadherin was significantly correlated with increasing age (P=0.0006) and was higher in positive venous invasion patients (P=0.0005). When the E-cadherin immunohistochemical stain was compared with the serum E-cadherin level in 54 patients, no significant statistically meaningful result was obtained (P=0.2881). However, 4 patients with serum E-cadherin levels about 6000 ng/ml were classified into the lower expression group ($<80\%$ of E-cadherin immunohistochemicals stain. In the analysis for 36 patients who were early gastric cancer patients, the serum E-cadherin level in lymph-node-metastatic patients was higher than it was in the other patients (P=0.0442). Conclusion: The serum E-cadherin level in gastric cancer patients was higher than the level in normal control patients. In advanced gastric cancer patients, that the difference was increased. Also, since the E-cadherin level correlated with the serum E-cadherin level with venous invasion, it can be used as an effective tumor marker for gastric cancer. Particularly, in that the serum E-cadherin level correlated with lymph node metastasis in early gastic cancer, it can be used when a therapeutic method for early gastric cancer is selected.

CT영상에서 개별 치아 분리를 위한 적응 최적 임계화 방안

허훈,채옥삼,Heo, Hoon,Chae, Ok-Sam 대한전자공학회 2004 電子工學會論文誌-SP (Signal processing) Vol.41 No.3

치과 분야에서는 치아교정이나 수술 시뮬레이션을 위해서 각 치아를 개별적으로 조작할 수 있는 3차원 치아모델이 필요하다. 치아 CT 영상으로부터 이러한 치아모델의 재구성을 위해서는 각 치아를 이웃한 치아나 치조골로부터 정확하게 분리할 수 있어야 한다. 본 연구에서는 치아 영역을 효과적으로 분리하기 위한 영상정규화 방안과 최적임계화방안을 제안한다. 제안된 방법은 연속적인 CT 영상 슬라이스들에서 치아영역의 형태와 밝기는 점진적으로 변한다는 사실을 근거로 이전 슬라이스에서 추정된 임계치를 이용하여 현 슬라이스의 임시치아경계를 결정하고 이것을 바탕으로 보다 정확한 임계치를 계산한다. The 3D tooth model in which each tooth can be manipulated individualy is essential component for the orthodontic simulation and implant simulation in dental field. For the reconstruction of such a tooth model, we need an image segmentation algorithm capable of separating individual tooth from neighboring teeth and alveolar bone. In this paper we propose a CT image normalization method and adaptive optimal thresholding algorithm for the segmenation of tooth region in CT image slices. The proposed segmentation algorithm is based on the fact that the shape and intensity of tooth change gradually among CT image slices. It generates temporary boundary of a tooth by using the threshold value estimated in the previous imge slice, and compute histograms for the inner region and the outer region seperated by the temporary boundary. The optimal threshold value generating the finnal tooth region is computed based on these two histogram.

개량박막 유한요소법에 의한 두가지 블랭크로부터의 사각컵 딥드로잉 성형해석

허훈,한수식,Huh, Hoon,Han, Soo-Sik 대한기계학회 1994 대한기계학회논문집 Vol.18 No.10

The design of sheet metal working processes is based on the knowledge about the deformation mechanism and the influence of the process parameters. The typical geometric process parameters are the die geometry, the initial sheet thickness, the initial blank shape, and so on. The initial blank shape is of vital importance in the most sheet metal forming operations, especially in the deep drawing process, since the forming load and the strain distribution are significantly affected by the shape of an initial blank. The influence of the initial blank shape on a square cup deep drawing process is investigated by the numerical simulation and the experiment. The numerical simulation is carried out by a modified membrane finite element method which takes bending deformation into account. The numerical and experi-mental results show that the initial blank shape have strong influence on the forming load and the strain distribution. The numerical results are compared with the experimental results and other numerical results which are calculated with the membrane theory.

객체인식을 위한 FAST와 BRIEF 알고리즘 기반 FPGA 설계

허훈,이광엽,Heo, Hoon,Lee, Kwang-Yeob 한국전기전자학회 2013 전기전자학회논문지 Vol.17 No.2

본 논문은 기존의 FAST와 BRIEF 알고리즘을 Zynq-7000 Soc Platform에서 하드웨어로 구현했다. 대표적으로 SIFT 나 SURF 알고리즘을 사용하여 특징점 기반 하드웨어 가속기로 구현 하지만, 하드웨어 비용과 내부 메모리가 많이 필요하다. 제안하는 FAST & BRIEF 가속기는 기존의 SIFT 나 SURF 가속기 보다 내부 메모리 사용량을 약 57%, 하드웨어 비용을 약 70% 정도 감소하고, 수행 시간은 Clock 당 0.17 Pixel를 처리한다. This paper implemented the conventional FAST and BRIEF algorithm as hardware on Zynq-7000 SoC Platform. Previous feature-based hardware accelerator is mostly implemented using the SIFT or SURF algorithm, but it requires excessive internal memory and hardware cost. The proposed FAST & BRIEF accelerator reduces approximately 57% of internal memory usage and 70% of hardware cost compared to the conventional SIFT or SURF accelerator, and it processes 0.17 pixel per Clock.

초소형재료의 펀치성형에 관한 유한요소해석

허훈,이기석,최영준,Huh, Hoon,Lee, Ki-Seok,Choi, Yeong-Jun 대한기계학회 1996 大韓機械學會論文集A Vol.20 No.2

Superplastic punch forming of sheets is simulated by a finite element method to obtain the optimal punch speed and the related deformed shapes. The punch forming has an advantage of guaranteeing the desired accuracy inside a product and controlling the thichness of a deformed sheet more accurately than blow forming. The finit element code developed is associated with the contact algorithm and the control algorithm of punch speed for the optimum forming. The simulation demonstrates that the variation of the thichness in a blank sheet affects the punch speed and the final distribution of the thichness in a product. The analysis proposes that a ring-typed thichness controller is very effective in controlling the thichness of a deformed sheet appropriately.

다단 회로에서 테스트 불가능한 경로 검출을 위한 효율적인 알고리듬의 설계

허훈,황선영,Heo, Hoon,Hwang, Sun-Young 대한전자공학회 1997 電子工學會論文誌, C Vol.c34 No.3

This paper presents the design and implementation of an efficient algorithm for detecting untestable paths in multi-level circuits. Transforming multi-level circuit into a multiplexor-based one through BDD(binary decision diagram)construction, the proposed algorithm detects untestable paths in the transformed circuits. By constructing ENF (equivalent normal form) only for reconvergent paths, the proposed system detects and removes untestable paths efficiently in terms of the run-time and memory usage. Experimental results for MCNC/ISCAS benchmark circuits show that the system efficiently detects and removes untestable paths. The run-time and memory usage have been reduced by 37.7% and 60/9%, respectively, comapred to the previous methods.

원형평판의 붕괴문제에 관한 유한차분 완전 하계해

허훈,Huh, Hoon 대한기계학회 1990 대한기계학회논문집 Vol.14 No.6

본 연구에서는 Yang의 이론을 바탕으로 여러가지 원형집중하중을 받는 원형평 판에 관한 최대하계해를 구하고자 한다.앞서 열거한 문헌에서는 여러가지 해석법이 제시되었으나, 문제의 성격에 비하여 그 해법이 매우 복잡하였다. 본 논문에서는 원 형평판에 관한 해법으로서 전산기를 응용하여 가능한 한 단순한 해법으로 최대화기법 에 의한 완전한 해를 얻기 위한 시도를 제시하고자 한다. Accurate load-carrying capacities and moment distributions of thin circular plates are obtained for clamped or simply-supported boundary condition under various concentrated circular loadings. The material is regarded as perfectly-plastic based on an arbitrary yield function such as the Tresca yield function, the Johansen yield function, and the farmily of .betha.-norms which possesses the von Mises yield function and the Frobenius norm. To obtain the lower bound solutions, a maximization formulation is derived and implemented for efficient numerical calculation with a finite difference method and the modified Newton's method. The numerical results demonstrate plastic collapse behavior of circular plates and provide their design criteria.