http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
대역 저지 특성을 갖는 정합 회로를 이용한 USB Dongle용 이중 대역 MIMO 안테나
한민석(Minseok Han),최재훈(Jaehoon Choi) 한국전자파학회 2009 한국전자파학회논문지 Vol.20 No.9
본 논문에서는 차세대 USB dongle 적용을 위한 대역 저지 특성 정합 회로를 갖는 이중 대역 MIMO 안테나를 제안한다. 제안된 이중 대역 MIMO 안테나는 광 대역 특성을 갖는 두 개의 이중 대역 PIFA로 구성된다. LTE 대역의 격리도 특성을 개선하기 위해서, 대역 저지 특성을 갖는 정합 회로가 각각의 안테나 끝부분에 삽입되었다. 삽입된 대역 저지 특성을 갖는 정합 회로는 특정 주파수에서 표면 전류를 억압할 수 있고, LTE 대역의 770 ㎒와 DCN 대역의 830 ㎒에서 추가적인 공진을 발생시킨다. 제안된 MIMO 안테나는 LTE 대역과 DCN 대역을 동시에 만족시킨다. In this paper, a dual-band MIMO antenna with a band stop matching circuit for next generation USB dongle application is proposed. The proposed multiband MIMO antenna consists of two dual-band PIFAs which provide wideband characteristics. In order to improve the isolation characteristic at the LTE(Long Term Evolution) band, a band stop matching circuit was inserted at the corner of each antenna element. The inserted band stop matching circuit is to suppress the surface current at the specific frequency band and to generate two additional resonances around 770 ㎒ for LTE band and near 830 ㎒ for digital communications network(DCN) service. The proposed MIMO antenna can cover LTE and DCN services, simultaneously.
한민석(Minseok Han),최재훈(Jaehoon Choi) 한국전자파학회 2010 한국전자파학회논문지 Vol.21 No.6
본 논문에서는 차세대 휴대 단말기용 다중 안테나 시스템을 제안하였다. 제안된 MIMO 안테나는 상호 이격 거리가 6 ㎜이고, 100 ㎜ 길이를 갖는 두 개의 평행한 폴디드 모노폴 안테나와 decoupling 네트워크로 구성되고, 휴대 단말기 상단에 위치한다. LTE 대역 13의 격리도 특성을 개선하기 위해서, 서로 가깝게 위치한 두 안테나 사이에 decoupling 네트워크가 삽입되었다. 제안된 decoupling 네트워크는 구조가 간단하고 위상 지연을 갖는 두 개의 전송 선로와 병렬 리액티브 성분, 공통 접지 라인으로 구성된다. 휴대 단말기 하단에는 광대역 특성을 얻기 위해 슬릿을 사용해서 급전 라인과 접지 라인 사이에 강한 전자기 결합을 갖는 넓은 폴디드 패치가 사용되었다. 또한, 이렇게 구성된 3개의 다중 안테나 시스템의 성능이 분석되었다. In this paper, a multiple antenna system for next generation mobile applications is proposed. The proposed MIMO antenna consists of two parallel folded monopole antennas with the length of 100 ㎜ and spacing of 6 ㎜ and a decoupling network which locates at the top side of a mobile handset. In order to improve the isolation characteristic at the LTE band 13, a decoupling network was added between the two antenna elements placed close to each other. The decoupling network, consisting of two transmission lines, a shunt reactive component and common ground line, is simple and compact. To obtain the wide bandwidth characteristic, an wide folded patch structure generating the strong coupling between feeding and shorting lines through the slit is used at the bottom side of a mobile handset. Also, the performance of a multiple antenna system composed of three antenna elements is analyzed.
한민석(Minseok Han) 한국정보전자통신기술학회 2016 한국정보전자통신기술학회논문지 Vol.9 No.6
본 논문에서는 이중루프 구조를 갖는 다중모드 무선전력전송 시스템을 제안하였다. 본 논문에서 제안한 다중 모드 무선전력전송 시스템은 두 개의 서로 다른 주파수 6.78 MHz 자기공진 무선전력전송 모드와 13.56 MHz NFC 모드로 동작하는 외부 루프 모듈과 두 개의 서로 다른 주파수에서 동작하는 자기유도 표준인 WPC 모드와 PMA 모드로 동작하는 외부 루프와 연결된 내부 루프 모듈로 구성된다. 실제 상용 스마트폰 배터리 커버에 장착하기 위해 페라이트 시트를 포함한 45 × 90 × 0.35 mm3 크기에 맞춰 설계 및 최적화 되었다. 제안된 다중모드 무선전력전송 시스템은 기존의 자기유도방식 표준에 해당하는 WPC와 PMA를 지원할 뿐만 아니라 6.78 MHz 및 13.56 MHz에서 20 dB 이상의 반사손실 특성을 나타내었고 6.78 MHz 자기공진 무선충전 환경에서는 공진코일 간 70% 이상의 효율 특성을 갖는다. In this paper, we propose a multi-mode wireless power transfer (WPT) system with a dual loop structure. The proposed multi-mode WPT system consist of outer loop module which can operate at two different frequency bands including 6.78 MHz magnetic resonance WPT mode and 13.56 MHz near field communication (NFC) mode and inner loop module connected with outer loop which can operate at two different frequency bands including WPC mode and PMA mode based on inductive coupling standards. In order to be able to embed this system into smartphone battery back cover, the electrical designs are optimized and then the size was fixed 45 × 90 × 0.35 mm3 (including ferrite sheet) which is the same commercial smartphone. The proposed multi-mode WPT module can cover WPC and PMA mode based on inductive coupling. Moreover, it has more than 20 dB return loss characteristics at two different frequency bands including 6.78 MHz and 13.56 MHz, and shows more than 70 % transfer efficiency between resonant coils at 6.78 MHz in magnetic resonant charging environment.
저선회 연소기에서 난류생성기 판 형상에 의한 연소특성 : Part I 비반응장 유동
한민석(Minseok Han),이기만(Keeman Lee) 한국연소학회 2020 한국연소학회지 Vol.25 No.1
This paper investigates the concept of fractal grid as turbulence generator which has constant reduce rate of grid thickness in low swirl combustor. Turbulence performance comparison of with and without swirler in a non-reactive isothermal flow of model nozzle was investigated using a fractal grid with various RRBT ratios and a general grid with conventional perforated hole configuration. As comparison barometers of turbulence performance, turbulence mean velocity(Ū), turbulence fluctuation(u′) and turbulence intensity (u′/Ū) were investigated. For all the case, the turbulence intensity of fractal grid was higher than the general grid based on perforated holes. A maximum u′ showed to locate at a minimum position of Ū, which is consistent with wake interaction theory. Also, the turbulence intensity increased with smaller value of RRBT in fractal grid. With a constant bulk velocity of 6 ㎧, the inner recirculation zone was not detected by using a PIV system and a hot-wire anemometry analysis with radial direction, which is a very important phenomenon to meet the low swirl combustion.