http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
가스 터빈 블레이드의 립 냉각과 딤플-립 복합 냉각 기법 비교연구
최용덕(Yong Duck Choi),이용진(Yong Jin Lee),홍정기(Jung Gi Hong),김진곤(Jin Kon Kim),곽재수(Jae Su Kwak) 한국유체기계학회 2009 유체기계 연구개발 발표회 논문집 Vol.2009 No.-
Detailed distributions of the heat transfer coefficients in a channel with angled rib or both rib and dimple were measured by the transient liquid crystal technique. The channel aspect ratio, rib height, rip pitch, rib angle were 2, 6 ㎜, 60 ㎜, and 60 degree, respectively. The diameters and center-to-center distance of the dimple were 6 ㎜ and 7.2 ㎜, respectively. Results show that the distribution of heat transfer coefficient was asymmetric due to the secondary flow induced by the angled rib. Also, dimples fabricated between the ribs increased the heat coefficient. Thus, the compound cooling technique with angled rib arid dimple can be improve the heat transfer performance of a gas turbine blade.
4:1 종횡비를 갖는 가스터빈 블레이드 냉각 유로에서의 립-딤플 복합 냉각 특성 연구
최용덕(Yong Duck Choi),김석범(Seok Beom Kim),이용진(Yong Jin Lee),김진곤(Jin Kon Kim),곽재수(Jae Su Kwak) 한국추진공학회 2010 한국추진공학회 학술대회논문집 Vol.2010 No.5
본 연구에서는 딤플이 설치된 유로, 립이 설치된 유로, 립과 딤플이 함께 설치된 유로에서의 열전달 성능을 천이액정법을 이용하여 측정하였다.. 실험에 사용된 유로의 종횡비(W/H)는 4이고, 립의 높이는 6 mm, 립 간 거리(P/e)는 10, 립이 설치된 각도는 60°이며, 딤플의 직경은 6 mm, 딤플 중심간 거리(s/D)는 1.2로 하였다. 레이놀즈 수는 30000-50000에 대해 실험을 수행하였다. 립이 설치된 유로에서는 경사 립에 의해 발생된 이차유동이 열전달 계수를 증가시켰고, 립과 딤플이 함께 설치된 유로에서는 립 사이에 설치된 딤플이 열전달 계수를 더욱 증가시켰다. 열전달계수는 립과 딤플이 복합 적용된 유로, 립이 적용된 유로, 딤플이 적용된 순으로 나타났고, 열성능계수도 립과 딤플이 복합 적용된 유로에서 크게 나타났다. Heat transfer coefficients in a dimpled channel, a ribbed channel, and a rip-dimple compound channel were measured by the transient liquid crystal technique. The channel aspect ratio, the rib height, the rip pitch, and the rib angle were 4:1, 6 mm, 60 mm and 60°, respectively. The dimple diameter and the center-to-center distance were 6mm and 7.2 mm, respectively, and the Reynolds number range was 30,000-50,000. Results showed that the heat transfer coefficients were increased by the angled rib. For the dimple-rib compound cooling cases, the heat transfer coefficients were further augmented and the thermal performance factor for the case was the highest.