http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
최상길(Sang-gil Choi),황성우(Seong-woo Hwang),전호진(Ho-jin Jeon),김우혁(Woo-hyeok Kim),정도현(Do-hyeon Jeong),이다연(Da-yeon Lee),이상운(Sang-un Lee) 한국방송·미디어공학회 2021 한국방송공학회 학술발표대회 논문집 Vol.2021 No.11
방송장비가 네트워크 기술을 만나 진화하고 있다. 네트워크 케이블로 초고해상도 영상과 다채널 음향 데이터를 송·수신하고, 다수의 방송장비 제어를 가능케 하는 NDI(Network Device Interface)의 등장으로 방송장비와 네트워크 기술이 융합되고 있다. 최근 국내외 여러 기업이 네트워크 기반의 방송 솔루션을 출시하고 있어, 관련 산업계는 향후 방송장비 시장이 네트워크 기반으로 개편될 것으로 전망하고 있다. NDI는 뉴텍(NewTek)에서 개발한 IP 전송 프로토콜의 일종으로 무(無)손실, 압축, 제로(Zero) 딜레이, 멀티캐스트 등의 특징을 갖고 있다. 기존 비디오 전송 프로토콜이었던 SDI(Serial Device Interface)와는 다르게 네트워크에서 방송장비를 운용할 수 있도록 만들어진 프로토콜이다. 본 논문에서는 NDI를 기반으로 앞으로 다가올 포스트 코로나 시대에 대응할 효율적인 방송 환경을 제안하고자 한다.
제조라인 통합 설계 및 분석(II) – 디지털 가상생산 기술 적용을 통한 지속적인 라인 설계, 분석 및 최적화 프로세스
최상수(SangSu Choi),성낙윤(Nakyun Sung),신연식(Yeonsik Shin),노상도(Sang Do Noh) (사)한국CDE학회 2014 한국CDE학회 논문집 Vol.19 No.2
Generally, over 95% of manufacturing cost is determined in the design and manufacturing preparation step, especially a great part of productivity is determined in the manufacturing preparation step. In order to improve the manufacturing competitiveness, we have to verify the problems that can be occurred in the production step and remove the unnecessary factors in the manufacturing preparation step. Thus, manufacturing industries are adopting digital manufacturing system based on modeling & simulation. In this paper, we introduce e-FEED system (electronic based Front End Engineering and Design) that is the integrated design and analysis system for optimized manufacturing line development based on simulation automation and explain the work process (Design, Analysis and Optimization) about manufacturing line development using e-FEED system. Also, the effect is described through the real implementation cases.
제조라인 통합 설계 및 분석(I) - 디지털 가상생산 기술 적용을 위한 모델링 & 시뮬레이션 자동화 시스템
최상수(SangSu Choi),현정호(Jeongho Hyeon),장용(Yong Jang),이범기(Bumgee Lee),박양호(Yangho Park),강형석(HyoungSeok Kang),전찬모(Chanmo Jun),정진우(Jinwoo Jung),노상도(Sang Do Noh) (사)한국CDE학회 2014 한국CDE학회 논문집 Vol.19 No.2
In manufacturing companies, different types of production have been developed based on diverse production strategies and differentiated technologies. The production systems have become smart, factories are filled with unmanned manufacturing lines, and sustainable manufacturing technologies are under development. Nowadays, the digital manufacturing technology is being adopted and used in manufacturing industries. When this technology is applied, a lot of efforts, time and cost are required and training professionals in-house is limited. In this paper, we introduce e-FEED system (electronic based Front End Engineering and Design) that is the integrated design and analysis system for optimized manufacturing line development on virtual environment. This system provides the functions that can be designed easily using library and template based on standardized modules and analyzed automatically the logistic and capacity simulation by one-click and verified the result using visual reports. Also, we can review the factory layout using automatically created 3D virtual factory and increase the knowledge reuse by e-FEED system.
협대역 소나시스템에서 도플러 천이에 강인한 고속 LFM 표적 검출기법
최상문(Sang-Moon Choi),도대원(Dae-Won Do),김우식(Woo-Sik Kim),이동훈(Dong-Hun Lee),김형문(Hyung-Moon Kim) 대한전자공학회 2014 전자공학회논문지 Vol.51 No.8
LFM 신호를 이용하여 속도가 변화하는 표적의 존재 유무를 검출하는 기존의 소나시스템에서는 다수의 LFM 도플러 상관기를 통해 얻은 결과들을 시간상에서 정렬시킨 후 최대값을 테스트 셀로 선택하여 사용한다. 이때 정밀한 표적 검출을 하기 위해서는 많은 수의 LFM 도플러 상관기들이 필요하며, 이로 인해 요구되는 연산량과 메모리도 역시 증가하게 되어 정밀한 LFM 표적 검출기를 실제 구현하는 것을 어렵게 한다. 본 논문에서는 LFM 신호를 사용하는 소나시스템에서 표적 속도 변화에 강인하면서도 고속으로 표적 존재 유무를 검출하기 위한 새로운 기법을 제안하였다. 제안하는 기법에서는 많은 수의 LFM도플러 상관기들의 정렬된 결과를 합하여 테스트 셀을 만들었으며, 이를 통해 SNR을 향상시킬 뿐만 아니라 표적 속도 변화에 강인한 SNR 값을 제공하여 검출기의 성능을 향상시킨다. 또한 제안하는 기법은 많은 수의 LFM 도플러 상관기들의 정렬된 결과를 합하는 과정을 하나의 합필터로 구현하여 연산량을 획기적으로 줄임으로써 표적을 고속으로 검출할 수 있게 하였다. In a conventional sonar system, which uses LFM signal for detecting targets with varying speed, the results of multiple LFM Doppler correlators are aligned and the maximum alined result are selected as a test cell for detecting targets. As the number of the LFM Doppler correlators are increased for accurate target detection, as the required computational complexity and the memory are also increased. This fact makes it difficult to implement the accurate LFM target detector. In this paper, we propose a new fast target detection which is robust for the variation of target speed. Because the proposed method uses the summation of alined results of large numbers of LFM Doppler correlators, the proposed method increase SNR and provide robust SNR for the variation of target speed. And the proposed method can provide very fast target detection by implementing the process, the summation of alined results of large numbers of LFM Doppler correlators, as one summation filter.
유비쿼터스 기술을 이용한 프레스 금형의 트라이아웃 관리시스템
최상수(SangSu Choi),양태호(TaeHo Yang),노상도(Sang Do Noh),진희주(HeeJu Jin),이용한(Yong-Han Lee),이인석(Inseok Lee),권성오(Sungoh Kwon) (사)한국CDE학회 2009 한국CDE학회 논문집 Vol.14 No.5
In these days, automotive companies are trying to develop new manufacturing technologies and paradigms for rapid product development and production. The press die development process account for 40% of entire vehicle development process, and tryout process usually takes 3 to 4 months, and it is the biggest time portion out of dies manufacturing. Therefore, the effective tryout management system is essential to reduce time and cost of automotive press die production. This paper suggests improved process and practical application of tryout management using ubiquitous technology, and shows the results such as shorten time, improved quality and supporting of lifecycle engineering of press die.
최상도(Sang Do Choi),양민석(Min Suk Yang),조무제(Moo Je Cho) 한국응용생명화학회 1984 Applied Biological Chemistry (Appl Biol Chem) Vol.27 No.3
The change in fatty acid compositions of the glycolipid and phospholipid of sesame seed was analyzed during the storage for 4, 9, and 15 months at four different storage conditions, that is, storage under light with linen bag(LA), storage under light with polyethylene bag(LS), storage in dark with linen bag(DA), and storage in dark with polyethylene bag(DS). In the fatty acid composition of glycolipid, palmitic and stearic acid decreased during the storage but the linoleic acid increased significantly, particularly, between 4 to 9 months of storage. The content of palmitic and stearic acid in phospholipid decreased until 9 months, then increased until 15 months of storage, but reverse tendency was, observed in the content of oleic and linoleic acid. The ratio of unsaturated to saturated fatty acids in glycolipid increased during the storage of 15 months in all the storage conditions. The ratio of unsaturated to saturated fatty acids of phospholipid in DA and LA was slightly higher than that in DS and LS conditions during the storage for 15 months.