http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
알루미나 세라믹스의 기계적 특성에 미치는 MgO출발물질의 영향
조용익,정상귀,조성용,김승재 한국세라믹학회 2002 한국세라믹학회지 Vol.39 No.1
고순도 알루미나 분말에 소결조제로서 초산 마그네슘과 질산 마그네슘을 1000ppm첨가하여 제작한 소결체에 대해서 소결조제로 사용한 MgO의 출발물질의 종류가 소결체 특성에 미치는 영향을 고찰하였다. 초산 마그네슘과 질산 마그네슘을 사용해서 제작한 소결체에 대해서 소결온도 1$600^{\circ}C$에서 상대밀도의 급격한 감소가 확인되었고 SEM관찰결과 소결조제로 사용한 두 종류의 출발물질을 첨가한 경우에 동일하게 소결체의 outer layer에서는 입성장 및 기공이 형성되어있고 inner layer에서는 알루미나 입계에 제2상의 존재가 관찰되었다. 이 시편의 EPMA을 이용한 원소분석결과로부터 소결온도 1$600^{\circ}C$에서 알루미나 입계에 존재하는 제2상은 Mg를 함유한 혼합물이라는 것을 알 수 있었다. The effect of kind of starting materials used for a sintering additive. magnesium acetate and magnesium nitrate, on the mechanical properties of alumina sintered body made by adding 1000 ppm of the additives, respectively, was investigated. As for the alumina sintered bodies prepared from magnesium acetate and magnesium nitrate, we observed that their relative densities decreased rapidly with increasing sintering temperature 1$600^{\circ}C$. Outer layer of alumina bodies had a duplex microstructure consisting of pores and grain growth. Also the inner layer had a second phase between alumina grain boundaries. By EPMA analysis, we confirmed that the grain boundary phase was a compound containing Mg.
마그네시아 첨가 $Al_2$$O_3$세라믹스의 내부구조 및 Weibull Modulus
조용익,유선균,정상귀,조성용,김승재,오꾸미야마사타로 한국세라믹학회 2001 한국세라믹학회지 Vol.38 No.5
고순도 알루미나 분말에 소결조제로서 MgO를 0ppm 및 500ppm 첨가하여 열분무건조기를 사용하여 준비한 과립을 80$0^{\circ}C$에서 하소를 함으로써 얻어진 과립으로 제작한 소결체의 MgO 첨가량에 따른 미세구조와 꺾임강도에 미치는 영향을 고찰하였다. 또한 시편두께를 50$mu extrm{m}$의 박편으로 가공하여 투광법으로 내부구조도 관찰하였다. MgO를 500ppm 첨가하여 제작한 과립을 180 MPa의 냉간정수압성형성 후 1$600^{\circ}C$에서 소결한 소결체는 상대밀도가 100%에 도달하였고 균일한 결정립성장의 치밀한 미세구조를 나타내었다. MgO를 500ppm 첨가한 시편의 4점 꺾임강도 또한 각 소결온도에서 MgO를 9ppm 첨가한 시편보다 23%-32%정도 높은 강도를 나타내었으며, 특히 소결온도 1$600^{\circ}C$에서는 꺾임강도가 501MPa 그리고 weibull 계수가 20의 고강도이면서 신뢰성이 높은 알루미나 소결체가 얻어졌다. 본 연구에서는 weibull 계수의 값이 높은 시편일수록 내부구조의 결함크기가 작고 이 작은 결함이 시편내부에 균일하게 분포되어 있음을 확인할 수 있었다.
습식 체분리법을 이용한 알루미나분말 중의 조대입자 함량평가
정상진,임형미,이승인,김영희,김수룡,조용익,Jung, Sang-Jin,Lim, Hyung-Mi,Lee, Seung-In,Kim, Young-Hee,Kim, Soo-Ryong,Cho, Yong-Ick 한국세라믹학회 2002 한국세라믹학회지 Vol.39 No.8
세라믹 분말을 이용하여 슬러리와 분산제의 농도에 따른 조대입자 함량평가에 대한 연구를 수행하였다. 시판용의 알루미나 분말을 조대입자 분리용 시료로 사용하였으며, 분산제로는 sodium hexametaphosphate와 sodium polyacrylate를 사용하였다. 알루미나 농도의 증가 및 분산제 농도의 감소에 따라 조대입자의 함량이 증가하였다. 슬러리 내의 시료농도가 1.0wt%이고, 시료에 대해 1.0wt%의 분산제를 첨가하였을 때 조대입자의 함량이 가장 작게 측정됨을 알 수 있었다. 고분자 분산제인 sodium polyacrylate를 사용하여 sodium hexametaphosphate보다 조대입자의 함량이 크게 측정되었다. 실험횟수가 증가함에 따라, 체의 질량이 일정한 비율로 감소하는 경향을 나타냈다. 조대입자의 함량을 알고 있는 임의의 슬러리를 제조하여 실험을 실시한 결과, 본 연구에서 사용한 습식 체분리 방법은 조대입자 함량평가에 적합한 것으로 사료된다. The effects of solid and dispersant concentration was investigated by wet-sieving method for knowing the amount of coarse particle in fine powders. In the work alumina powders, sodium hexametaphosphate and sodium polyacrylate were used for preparing slurry. It was confirmed that the coarse particle mass increased by increasing alumina concentration and decreasing dispersant concentration. With systematic measurements we know that the alumina powder and dispersant of one weight percent(1.0wt%) were proper quantity for coarse particle mass measuring, respectively. Sodium polyacrylate as dispersant showed higher coarse particle mass than sodium hexametaphosphate. The sieve mass was decreased according to increase of experiment number. Based on experiments it was considered that wet-sieving method is good tool for measuring a coarse particle mass in fine powders.
Dimming 기능을 이용한 LED 평판 조명의 광학 특성 평가 및 시뮬레이션 분석
채성기(Sung Gi Chae),이윤철(Yoon Chul Lee),정동환(Dong Hwan Jung),김강호(Kang Ho Kim),조용익(Yong Ick Cho) 한국조명·전기설비학회 2011 한국조명·전기설비학회 학술대회논문집 Vol.2011 No.5월
기존 일반 조명을 대체 할 광원으로 LED 조명이 최근 이슈가 되고 있다. 더욱이 LED 조명의 가장 큰 장점인 에너지 절감 효과를 극대화 시키는 방법으로 실내·외 조명에서 Dimming Control에 대한 관심이 높아지고 있다. 이에 본 논문에서는 DIALUX 조명 분석 소프트웨어를 이용해 실내 환경에서 전류 값을 조정해 LED 평판 조명을 Dimming한 조도 Simulation값과 조명 분석 소프트웨어의 Dimming Function을 활용한 조도 Simulation 값의 상관관계를 살펴본다. 또한 Dimming에 따른 색 특성이 변화하는 문제를 파악하기 위해 Dimming에 따른 Spectrum 변화를 측정하여 조명의 전류별 색 특성을 분석하였다. Recently Issue came to the LED luminaires replaced by Conventional Lighting. Furthermore, There is a rising interest on LED Dimming Control for Indoor and Outdoor Lighting because of High Energy Saving effect. In this paper, we are finding out the Research of Dimming illuminance Simulation Value by adjusting the LED Flat Luminiaires Current in the Indoor Environment and illuminance Simulation Value by adjusting Illumination Analysis Software’s Dimming Function. In order to finding the problem of Color Shift by Dimming control, we measure the spectrum of LED Flat Luminaires and analysis Color Characteristic of Illumination Current grade.