http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
레이다용 C-대역 GaN 기반 고출력전력증폭장치 설계 및 제작
정형진(Hyoung Jin Jung),박지웅(Ji Woong Park),진형석(Hyoung SeokJin),임재환(Jae Hwan Lim),박세준(Se Jun Park),강민우(Min Woo Kang),강현철(Hyun Chul Kang) 한국전자파학회 2017 한국전자파학회논문지 Vol.28 No.9
본 논문에서는 탐색 레이다에서 사용되는 C-대역의 고출력전력증폭장치 및 구성품의 설계, 제작과 측정에 대하여 기술하였다. 반도체 소자인 GaN(질화갈륨)을 적용하여 반도체전력증폭조립체를 설계 및 제작하였고, 설계 제작된 도파관형태의 송신신호결합조립체를 통해 병렬로 구성된 반도체전력증폭조립체의 송신신호 출력을 결합하여 고출력 송신신호출력을 발생한다. 제작된 고출력전력증폭장치는 C-대역 500 ㎒ 대역폭, 최대 10.5 % 듀티, 송신펄스폭 O.O~OOO㎲에서 송신출력 44.98 ㎾(76.53 ㏈m) 이상이다. In this paper, it is presented the result of design and fabrication for C-band solid state high power amplifier unit and components using in search radar. The solid state power amplifier(SSPA) assembly was fabricated using GaN(Gallium Nitride), which is semiconductor device, and the transmit signal output power of the solid state high power amplifier unit is generated by combining the transmit signal power of the solid state power amplifier configured in parallel through a design and fabricated waveguide type transmit signal combine assembler. Designed solid state high power amplifier unit demonstrated C-band 500 ㎒ bandwidth, maximum 10.5 % duty cycle, transmit pulse width from O.O㎲~OOO㎲, and transmit signal power is 44.98 ㎾(76.53 ㏈m).
광경온도 및 주변온도 변화와 적분시간 변경에 의한 냉각형 적외선 검출기 불균일영상 보정기법 연구
강원석(Won-Seok Kang),정형진(Hyoung-Jin Jung),박인구(In-Gu Park),이기남(Ki-Nam Lee) 대한전자공학회 2021 전자공학회논문지 Vol.58 No.8
적외선 열화상 카메라는 2차원 초점면 배열에 집광되는 동일한 세기의 방사 에너지를 균일한 디지털 영상신호로 변환하기 위해 불균일보정 절차를 필요로 한다. 본 연구는 광경온도, 주변온도 변화, 적분시간 변경으로 인해 발생하는 불균일 보정이 가능한 테이블 기반 불균일보정 기법을 연구하였다. 모델링 데이터로 제안 기법의 유효성을 입증하였고, 다양한 조건에서 획득한 실험실 영상을 이용하여 보정 성능을 확인하였다. 실험 결과 제안 기법 적용 시 광경온도, 주변온도 변화는 물론 적분시간 변경에도 영상 불균일도를 낮은 수준으로 유지 가능했다. 이러한 접근은 기존 적분시간 변화에 불연속적인 보정 형태를 개선하는 시도로 넓은 온도 범위를 가진 표적을 지시하면서도 균일한 영상을 생성해야하는 적외선 영상탐색기 분야에 응용될 경우 운용성 측면에서 많은 도움이 될 수 있을 것으로 기대한다. Infrared imaging camera requires an Non-Uniformity-Correction(NUC) process to convert same radiant energy that is concentrated on a two-dimensional focal plane array into a uniform digital image signal. In this paper, a table-based NUC that enables correcting non-uniform images caused by continuous integration time changes and scene temperature, ambient temperature variation is studied. The validity of proposed NUC is demonstrated using modeling data, and the calibration performance is verified using laboratory data acquired under various conditions. The experiment shows that it was possible to maintain non-uniformity at a low level with the changes of scene temperature and background temperature as well as changes of integration time when the proposed method was applied. I expect this approach to be of great help in terms of operability when applied to the cooled infrared seeker, which requires uniform image generation while pointing at targets with a wide temperature range, in an attempt to improve the existing discontinuous NUC for integration time changes.
입자침전법을 이용한 다결정 산화수은과 산화납 필름의 방사선 유방촬영 장치 적용성 평가
노시철(Si Cheol Noh),박지군(Ji Koon Park),최일홍(Il Hong Choi),정형진(Hyoung Jin Jung),강상식(Sang Sik Kang),정봉재(Bong Jae Jung) 한국방사선학회 2014 한국방사선학회 논문지 Vol.8 No.7
본 연구에서는 입자 침전법으로 제작된 HgO와 PbO 기반 영상 센서의 유방촬영 영역에서의 적용 가능성을 조사하였다. 이를 위하여, 다양한 두께에 따른 HgO와 PbO 필름의 물리적 특성과 x선에 대한 양자 효율을 측정하였으며, 몬테카를로 시뮬레이션 결과와 비교 평가하였다. 또한, 입자 침강법을 이용하여 인듐 주석 산화물로 코팅 된 투명 유리기판 위에 대면적 다결정 박막을 제작하였다. 본 연구에서는 단결정의 효율과 비슷한 양자 효율을 얻기 위하여 필름의 두께와 제작 조건을 변화시켜 최적화 하였다. 본 연구의 결과를 기반으로 차후 대면적 a-Si:H 패널에 적합한 대면적 필름의 제작 기술과 최적화 연구가 가능할 것으로 판단된다. In this study, the morphology and the x-ray quantum efficient of mercury oxide (HgO) and lead oxide (PbO) sensors derived by particle sedimentation method were discussed. In the pursuit of this purpose, we investigated the electrical characteristics and the x-ray quantum efficiency of various thicknesses of HgO and PbO films in mammographic x-ray energy. We have therefore developed a particle-in-binder sedimentation method of fabricating large area polycrystalline films onto transparent glass substrates coated with indium tin oxide. We are currently optimizing the growth method to improve the quantum efficiency with the ultimate goal of obtaining as quantum efficiency close to that of single crystal performance. Our future efforts will concentrate on optimization of large area film growth techniques specifically for deposition on a-Si:H flat panel readout arrays.