http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
생화학적 네트워크 데이터의 효율적인 통합을 위한 시스템
정태성(Taesung Jung),안명상(Myungsang Ahn),조완섭(Wansup Cho) 한국정보과학회 2005 한국정보과학회 학술발표논문집 Vol.32 No.1
유전자의 생물학적 기능을 밝히고 세포 내 상호작용을 이해하는 것은 post-genome era의 가장 중요한 작업 중 하나이다. 세포는 서로 다른 컴포넌트들의 상호작용에 의해 아주 복잡한 네트워크를 구성한다. 생화학적 네트워크에는 metabolic, regulatory, signal transduction과 같은 세포의 프로세스를 포함한다. 이러한 생화학적 네트워크들은 서로 다른 정보체계를 가지고 각기 다른 데이터베이스에 분산되어 저장관리 되고 있다. 따라서 생화학적 네트워크 데이터를 체계적으고 효율적으로 저장, 관리하기 위한 데이터베이스에 대한 필요성이 증대되고 있다. 본 논문에서는 기존의 생화학적 네트워크 데이터베이스의 장.단점을 분석하고 객체지향 방식에 입각한 새로운 생화학적 네트워크 데이터의 통합을 위한 시스템 모델을 제시한다. 제안된 시스템 모델은 생화학적 네트워크 데이터에 대한 생물학전 관계를 자연스럽게 표현할 수 있는 객체지향 모델을 사용하였다. 또한 생화학적 네트워크 모델을 묘사하기 위한 응용프로그램 사이의 데이터 교환의 표준언어인 SBML[2]스키마를 기반으로 하고 있다.
Ortholog 데이터베이스를 이용한 생물 경로 재구축 시스템
정태성(Taesung Jung),오정수(Jeongsu Oh),조완섭(Wansup Cho) 한국정보과학회 2005 한국정보과학회 학술발표논문집 Vol.32 No.1
현재 국내외 적으로 많은 대사경로 재구축을 위한 소프트웨어들이 개발 보급되고 있다. 그러나 기존의 소프트웨어들은 유전자 서열의 주해 작업이 끝난 게놈에 대해서만 가능하다. 따라서 대사경로를 예측하고자 할 경우는 주해 작업이 선행되어야 하는 어려움이 있었다. 본 논문에서는 주해 작업이 완료되지 않은 유전자 서열로부터 유전자의 기능 예측뿐만 아니라 대사경로를 예측할 수 있는 시스템을 제안한다. 제안된 시스템은 Orthologous 데이터베이스를 활용하여 새롭게 밝혀진 유전자 서열을 대상으로 비교적 정확성이 높은 대사경로를 예측하는 기능을 제공한다. 이 방법을 통해 주해 작업이 완료되지 않은 유전자 서열을 이용하여 서열 내에 포함된 유전자의 기능을 예측할 뿐만 아니라 예측된 유전자 정보를 이용하여 대사 경로를 예측할 수 있다.
정태성(Taesung Jung),최인휴(Inhugh Choi),양민양(Minyang Yang) 대한기계학회 2003 대한기계학회 춘추학술대회 Vol.2003 No.4
An adequate method for the prediction of machining errors is essential to improve productivity and<br/> product quality. But it is known that there is a remarkable difference between values calculated by<br/> conventional roughness model and measured values of actual machined surfaces under high efficient cutting<br/> condition. This paper introduces the theoretical analysis of characteristic lines of cut remainder to evaluate a<br/> geometrical surface roughness accurately. In this study, analytic equations of the characteristic lines are<br/> derived from the surface generation mechanism of ball end milling considering the actual trochoidal<br/> trajectories of cutting edges. The predicted results are compared with the results of conventional roughness<br/> model.
알카놀아민 첨가제가 K<sub>2</sub>CO<sub>3</sub> 수용액의 이산화탄소 흡수속도와 염 석출에 미치는 영향
문철호,정태성,조창신,김종남,이영우,Moon, Cheol-Ho,Jung, Taesung,Cho, Chang Sin,Kim, Jong-Nam,Rhee, Young Woo 한국청정기술학회 2014 청정기술 Vol.20 No.2
In this study, the effect of alkanolamine additives, 2-amino-2-methyl-1-propanol (AMP) and 2-amino-2-methyl-1,3-propanediol (AMPD) on $CO_2$ absorption rate of $K_2CO_3$ solution and the formation of $KHCO_3$ crystals was investigated. The normalized $CO_2$ flux and the equilibrium $CO_2$ partial pressure were measured for 5 wt% additives and 30 wt% $K_2CO_3$ mixtures using a wetted-wall column unit at $40^{\circ}C$ and $60^{\circ}C$. Both additives showed the increased $CO_2$ absorption rate and lowered the equilibrium $CO_2$ partial pressure acting as promoters. Besides, AMPD which has two hydroxyl groups enhanced the formation of $KHCO_3$ solid product separated from the $CO_2$-rich solution from the results of batch cooling crystallization experiments. 본 연구에서는 입체장애 알카놀아민 첨가제인 2-아미노-2-메틸-1-프로판올(2-amino-2-methyl-1-propanol, AMP)과 2-아미노-2-메틸-1,3-프로판디올(amino-2-methyl-1,3-propanediol, AMPD)가 $K_2CO_3$ 흡수액의 이산화탄소 흡수속도와 $KHCO_3$ 고체염의 석출에 미치는 영향에 대해 고찰하였다. 흡수온도 $40^{\circ}C$와 $60^{\circ}C$에서 wetted-wall column을 이용하여 흡수속도와 이산화탄소 평형분압을 측정한 결과, 30 wt%의 고농도 $K_2CO_3$에 대해 5 wt% AMP와 AMPD는 흡수속도를 증가시키는 동시에 평형분압을 감소시켜, 흡수촉진제로서 흡수성능을 향상시키는 것으로 확인되었다. 또한, 회분식 냉각결정화 실험 결과, 복수의 히드록실기를 포함하는 AMPD가 흡수액을 냉각시 석출되는 $KHCO_3$ 고체염의 양을 증가시키는 것으로 나타났다.
정승현(Seunghyun Jung),정태성(Taesung Jung),김태경(Taekyung Kim),김경란(Kyoungran Kim),조완섭(Wansup Cho) 한국정보과학회 2006 한국정보과학회 학술발표논문집 Vol.33 No.1
본 논문에서는 SBML문서를 효율적으로 저장관리 할 수 있는 Gene Ontology 기반의 SBML 문서관리 시스템을 제안한다. SBML은 시스템생물학에서 생화학적 네트워크 데이터의 교환 표준으로 연구 개발 되었으며, 다수의 생화학적 네트워크 데이터베이스들이 SBML을 이용하여 데이터를 제공해주고 있다. 이러한 SBML 문서를 통해 서로 다른 데이터베이스 또는 응용 프로그램간 정보를 교환으로 사용되고 있으며, 그 양 또한 급속하게 증가하고 있다. 따라서 본 논문에서는 이러한 대량의 SBML 문서를 효율적으로 저장, 검색 할 수 있는 문서관리시스템을 제안한다. 제안된 시스템은 OODB를 사용하여 효율적으로 SBML 문서를 저장관리하며, Gene Ontology를 기반으로 생화학적 용어의 모호성을 해결하고, SBML 문서간의 발생하는 데이터 중복을 제거하여 데이터의 품질을 제고하였다.
최인휴(Inhugh Choi),정태성(Taesung Jung),홍원표(Wonpyo Hong),양민양(Minyang Yang) 대한기계학회 2003 대한기계학회 춘추학술대회 Vol.2003 No.4
Finish machining of a curved surface is often carried out by an NC system with curve interpolation in the<br/> field. This NURBS interpolation adopts a feedrate optimizing strategy based on both the geometrical<br/> information and dynamic properties. In case of a finish cut using a ball-end mill, the curve interpolator needs<br/> to take the machining process into account for more improved surface, while reducing the polishing time. In<br/> this study, the effect of low machinability at the bottom of a tool on surface roughness is also considered. A<br/> particular curve interpolation algorithm is proposed for generating feedrate commands which are able to<br/> control the roughness of a curved surface. The simulation of the machined surface by the proposed algorithm<br/> was carried out, and experimental results are presented.
알카놀아민 첨가제가 K<SUB>2</SUB>CO<SUB>3</SUB> 수용액의 이산화탄소 흡수속도와 염 석출에 미치는 영향
문철호(Cheol-Ho Moon),정태성(Taesung Jung),조창신(Chang Sin Cho),김종남(Jong-Nam Kim),이영우(Young Woo Rhee) 한국청정기술학회 2014 청정기술 Vol.20 No.2
본 연구에서는 입체장애 알카놀아민 첨가제인 2-아미노-2-메틸-1-프로판올(2-amino-2-methyl-1-propanol, AMP)과 2-아미노-2-메틸-1,3-프로판디올(amino-2-methyl-1,3-propanediol, AMPD)가 K2CO3 흡수액의 이산화탄소 흡수속도와 KHCO3 고체염의 석출에 미치는 영향에 대해 고찰하였다. 흡수온도 40 ℃와 60 ℃에서 wetted-wall column을 이용하여 흡수속도와 이산화탄소 평형분압을 측정한 결과, 30 wt%의 고농도 K2CO3에 대해 5 wt% AMP와 AMPD는 흡수속도를 증가시키는 동시에 평형분압을 감소시켜, 흡수촉진제로서 흡수성능을 향상시키는 것으로 확인되었다. 또한, 회분식 냉각결정화 실험 결과, 복수의 히드록실기를 포함하는 AMPD가 흡수액을 냉각시 석출되는 KHCO3 고체염의 양을 증가시키는 것으로 나타났다. In this study, the effect of alkanolamine additives, 2-amino-2-methyl-1-propanol (AMP) and 2-amino-2-methyl-1,3-propanediol (AMPD) on CO2 absorption rate of K2CO3 solution and the formation of KHCO3 crystals was investigated. The normalized CO2 flux and the equilibrium CO2 partial pressure were measured for 5 wt% additives and 30 wt% K2CO3 mixtures using a wetted-wall column unit at 40 ℃ and 60 ℃. Both additives showed the increased CO2 absorption rate and lowered the equilibrium CO2 partial pressure acting as promoters. Besides, AMPD which has two hydroxyl groups enhanced the formation of KHCO3 solid product separated from the CO2-rich solution from the results of batch cooling crystallization experiments.