http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
정우창,하백현,남궁식,문세기 한국화학공학회 1967 Korean Chemical Engineering Research(HWAHAK KONGHA Vol.5 No.1
Fixed and fluidized bed were compared with their reaction rate constant by the ammonium catalytic dissociation reaction. There was almost same reaction rate constant on both unit column fluidized reactor (5㎝φ) and scaled up fluidized reactor (10㎝ × 10㎝ × 60㎝) which is scaled up by inserting internal wall with hole into four compartments, but scaled up reactor without compartment shows lower value of its reaction rate constant than with compartment.
도시지역을 관통하는 홍수파의 특성에 관한 수치적 연구 (1) : 수치모형의 개발 및 검증
정우창,이진우,조용식,Jeong,Woo-Chang,Lee,Jin-Woo,Cho,Yong-Sik 한국방재학회 2009 한국방재학회논문집 Vol.9 No.6
본 연구에서는 도시지역을 관통하는 댐 붕괴파의 전파특성을 모의하고 분석하기 위한 선행 작업으로 천수방정식과 well-balanced HLLC 기법에 근간을 둔 2차원 비구조적 유한체적모형을 개발하였다. 개발된 모형은 다양한 1차원과 2차원의 댐 붕괴파 해석과 관련된 문제에 대해 검증되었으며, 검증결과 해석해 및 수리모형실험을 통한 실측자료와 매우 일치하는 경향을 나타냈다. 본 연구에서 개발된 수치모형은 현장에서 그리고 수리모형실험을 통해 관측된 수위자료와 잘 일치하였으며, 기존의 모형으로부터 계산된 수위결과에 비해 비교적 보다 정확한 결과를 나타내었다. In this study, a two-dimensional unstructured finite volume model based on the shallow-water equations and well-balanced HLLC scheme is developed. The model is verified by applying to various one- and two-dimensional problems related to the analyses of dam-break wave. The predicted numerical results agree very well with available analytical solutions and laboratory measurements. The model provides slightly more accurate results compared with the existing models.
3차원 이산 균열망 흐름장에서 균열요소의 길이분포 변화에 따른 내 유체 흐름 특성에 관한 수치적 연구
정우창 한국수자원학회 2019 한국수자원학회논문집 Vol.52 No.2
In this study, the effect of the fluid flow characteristics on the length distribution of the fracture elements composing the fracture network is analyzed numerically using the 3D fracture crack network model. The truncated power-law distribution is applied to generate the length distribution of the fracture elements and the simulations of fluid flow are carried out with the exponent from 1.0 to 6.0. As a result of simulations, when the exponent increases, the length distribution of the fracture elements gradually decreases, and the connectivity between the fracture elements affecting the permeability of the fracture network becomes weak. When we analyzed the distributions of flow rate calculated at each fracture element with the exponent , the mean flow rate at 1.0 was estimated to be about 447 times larger than that at 6.0 and for the flow calculated at the outflow boundary of the fracture network, the case of 1.0 was estimated to be 6,440 times larger than that of 6.0. 본 연구에서는 3차원 이산 균열망 수치모형을 이용하여 균열망을 구성하는 균열요소의 길이분포가 유체 흐름 특성이 미치는 영향에 대해 수치적으로 분석하였다. 균열요소의 길이분포의 생성을 위해 절단멱분포법칙을 적용하였으며, 지수 을 1.0에서부터 6.0까지 변화시키면서 유체 흐름 모의를 수행하였다. 모의결과 지수 이 증가함에 따라 균열요소들의 길이분포는 점차적으로 작아지며, 이로 인해 균열망의 투수성에 영향을 미치는 균열요소들 간의 연결성은 취약해지는 것으로 나타났다. 각각의 지수 에 대해 균열요소 각각에서 계산된 유량분포를 분석하였을 때 1.0에서의 평균유량이 6.0에 비해 약 447배 크게 산정되었으며, 균열망의 유출경계에서 계산된 유량의 경우 1.0일 때가 6.0에 비해 약 6,440배 크게 산정되었다.
극저탄소 IF 강에서 저온변태 페라이트에 관한 연구 (1) : Mn 과 열처리 조건의 영향 Effects of Manganese and Annealing Conditions
정우창,이재현,진영술 대한금속재료학회(대한금속학회) 2001 대한금속·재료학회지 Vol.39 No.6
An investigation was made to determine the effects of Mn content and annealing conditions on the formation of the low temperature transformation products in ultra low carbon interstitial free steels. With increasing the Mn content, yield and tensile strengths increased, but yield ratio decreased. The Mn was found to be effective to decrease the yield point elongation, causing continuous yielding in 3% Mn steel. Low temperature transformation ferrites such as quasi-polygonal ferrite, granular bainitic ferrite, and bainitic ferrite more easily formed with higher Mn content, higer annealing temperature, longer annealing time, and faster cooling rate. Polygonal ferrite grain was readily identified in the light microscope and was characterized by the polyhedral and equiaxed shape while quasi-polygonal ferrite showed the irregular changeful grain boundaries. It was found that both granular bainitic and bainitic ferrites revealed some etching evidence of substructures in the light microscope.