http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
신장 CT 검사와 <sup>99m</sup>Tc-DMSA Renal Scan 검사에서 측정한 신장 길이의 차이 및 상관분석
정우영,심동오,이동훈,최재민,Jung, Woo-Young,Shim, Dong-Oh,Lee, Dong-Hun,Choi, Jae-Min 대한핵의학기술학회 2021 핵의학 기술 Vol.25 No.1
핵의학 영상 검사 중에서 <sup>99m</sup>Tc-DMSA Renal scan은 비침습적이면서도 신장의 기능과 형태를 동시에 평가할 수 있으며 좌우 양측 신장에 섭취를 분석함으로써 신기능을 정량적이면서 정확하게 분석할 수 있다. 신장의 크기 및 길이 평가도 신장 이상의 주요 평가 항목이며, <sup>99m</sup>Tc-DMSA Renal scan을 이용한 신장 길이의 측정은 호흡에 의한 흔들림이나 해상력의 한계로 인해서 CT 보다 신장의 길이가 과대 또는 과소평가 될 수 있다. 본 연구는 해부학적인 평가가 우수한 CT 검사와 기능적인 평가가 우수한 <sup>99m</sup>Tc-DMSA Renal scan에서 측정한 신장 길이의 차이 및 상관관계를 분석하고, <sup>99m</sup>Tc-DMSA Renal scan에서 측정한 신장 길이의 정확성을 예측하는데 그 목적이 있었다. 신장 CT 검사와 <sup>99m</sup>Tc-DMSA Renal scan을 검사한 200명의 환자 자료를 대상으로 연구 분석하였고, 통계 분석을 위해 SPSS Ver. 17.0 프로그램을 사용하였다. 호흡에 의한 영향과 해상력의 차이에 의해서 CT 검사 보다 <sup>99m</sup>Tc-DMSA Renal scan에서 측정한 신장의 길이가 더 큰 것으로 분석되었다. 그러나 감마카메라와 연령에 따른 신장 길의 차이는 없었으나 신장 길이를 분석한 방사선사 별로는 차이가 있었다. 따라서 신장 길이 측정에서 방법의 표준화를 통한 정량 분석 결과의 일반화는 매우 중요할 것이며, 이는 <sup>99m</sup>Tc-DMSA Renal scan에서 츠정한 신장 길이의 정확성을 향상할 수 있을 것이다. 또한 CT 영상과 <sup>99m</sup>Tc-DMSA Renal scan에서 측정한 신장길이는 좌우측 신장 모두 매우 강한 양(+)의 상관관계가 있었다. 다수의 신장 질환에서 신기능 변화뿐만 아니라 길이나 크기가 변화하는 경우가 많으며 신장 길이를 정확하게 측정하는 방법과 표준화는 임상적인 진단에 매우 중요할 것으로 판단된다. 특히 소아의 경우에서는 다량의 방사선 피폭이 있는 CT 검사보다 <sup>99m</sup>Tc-DMSA Renal scan을 이용하여 형태학적인 평가와 기능적인 평가를 모두 시행하는 경우 많으므로 <sup>99m</sup>Tc-DMSA Renal scan에서 신장에 대한 기능적인 정보뿐만 아니라 크기나 길이, 위치 등과 같은 해부학적 정보를 정확하게 제공하는 것은 더욱 중요할 것으로 판단된다. Purpose This article studies the relationship between the length of a kidney measured by two scanning methods: Kidney Computed Tomography (CT) and <sup>99m</sup>Tc-Dimercaptosuccinic acid (DMSA) renal scan. Kidney CT provides a better anatomic assessment, while <sup>99m</sup>Tc-DMSA renal scan is superior in the kidney function test. Materials and Methods From January to December of 2019, two hundred patients who had Kidney CT and Tc<sup>99m</sup>-DMSA renal scan were chosen for this study. SPSS17.0 was selected for statistical analysis. Results Due to the effect of the breathing and resolution of <sup>99m</sup>Tc-DMSA renal scan, it showed the kidney's relatively longer length than the length of Kidney CT. For the same kidney, the length comparison among different brands' Gamma cameras was negligible. The length difference within the same age group did not show a noticeable discrepancy. However, there was a length difference between the radio technologists. Kidney CT and <sup>99m</sup>Tc-DMSA renal scan indicated a strong positive correlation between the length of the left and right kidney. Conclusion It is necessary to establish a standardized measurement method for measuring kidney length using <sup>99m</sup>Tc-DMSA renal scan. The kidney's functional changes and length changes are indications of Kidney diseases. Especially, pediatric patients tend to use <sup>99m</sup>Tc-DMSA renal scan for assessing the kidney's shape and the function to avoid potential radiation exposure during the Kidney CT. Therefore, it is significant to provide not only the kidney's functional information but also an anatomic analysis, including the kidney's size, length, and location through the <sup>99m</sup>Tc-DMSA renal scan.
정우영,정상만,최현규,이상문,Jung. Woo-Young,Jung. Sang-Man,Choi. Hyun-Kyu,Lee. Sang-Moon 한국방재학회 2009 한국방재학회논문집 Vol.9 No.2
우리나라는 매년 풍수해에 의한 피해가 증가하고 있으며, 대부분의 피해가 하천, 도로시설물을 중심으로 주로 일어나고 있다. 이들 피해에 따른 국가복구지원의 문제점은 매년 많은 금액의 피해 복구비가 투입되었음에도 불구하고, 개선복구 보다는 원상복구 위주의 복구비 지원으로 반복적 피해가 발생하고 있다는 사실이다. 이러한 재난의 비효율적 반복피해를 예방하기 위해서는 자연재난으로 인한 피해의 원인을 보다 정확히 진단하고 항구적인 방어대책의 마련을 위한 보다 구체적인 기준이 필요하다. 본 연구에서는 최근 국내에서 발생하고 있는 풍수해에 대한 전반적인 실태조사를 통하여 피해현상의 유형별 구분과 분석을 각각의 피해에 대한 복구방법이나 대책방법으로 각각 체계적으로 다르게 분류하고 보다 선진화된 예방적 복구 개념을 도입하기 위하여 피해 유형별로 새롭게 정리하였다. 이를 통하여 피해유형에 따른 피해분류 및 피해사례를 보다 체계적으로 수립, 계획할 수 있는 유형화 도감 및 평가방법을 국내외 수많은 기 선행 개선복구 사례를 토대로 분류, 개발하였다. Most damages of civil infrastructures under natural disasters are frequently occurred at surrounding areas of the river or the road. Every year, Recovery for these disaster damages are performed by the government. Recently, the government decide to change current recovery plan system because current recovery plan which doesn`t consider future disaster impacts at a site has been proved to be ineffective. Accordingly, new permanency recovery plan system is needed and its corresponding ideas are presented in this research considering more detailed disaster damage classifications and cause assessments. The proposed permanency recovery plan would also provide more systematic and diverse recovery response strategies including both two concepts, for example Preparedness considered by risk assessment and management, and Mitigation investigated by hazard impact analyses.
정우영,김성준,최현규,Jung,Woo-Young,Kim,Sung-Jun,Choi,Hyun-Kyu 한국방재학회 2009 한국방재학회논문집 Vol.9 No.3
현행 국내의 자연재난으로 인한 피해 사유시설에 대한 지원은 자연재해대책법 등에 명시된 재난복구비 지원기준에 따라서 이루어지고 있다. 그러나 이러한 현행 복구지원기준의 경우 실제 품목별 단가조사 및 산정이 객관적이고 효율적으로 조사, 산정되었는가에 대한 검토가 필요하나 지금까지 실질적으로 수행된 바는 없다. 따라서 본 연구는 현행 국내 복구비용 단가조사 및 산출근거 기준을 포괄적으로 진단하여 파생되는 문제점을 조사하고 이를 통하여 보다 체계적이고 구체적인 사유시설의 복구비용 조사방법과 산정기법을 제안하고자 한다. 복구지원 단가기준의 문제점 분석을 위하여 본 연구에서는 각 피해조사 품목별 지원기준을 조사, 부처별 실거래 단가의 현실화율을 산정하였고, 활용된 부처별 조사 데이터의 신뢰성을 측정하기 위해서 시험조사지역을 설정, 실제 현장단가를 조사, 비교하였다. 최종적으로 본 연구에서 수행된 분석결과 및 개선방안을 토대로 실제 공공기관에서 활용할 수 있는 사유시설 품목별 단가조사방법 및 산출기법 프로그램을 개발하였다. Financial supports of private facilities which were damaged by natural disaster are currently performed partially by a government and the guideline of corresponding recovery costs be the natural disaster prevention law in South Korea. However, current financial recovery guidelines for the damaged private facilities has not been estimated objectively so far. This research presents advanced recovery cost search and assesment methods for the damaged private facilities under natural disaster. To produce more accurate data, an investigation for practical field markets which are appointed in Kangwon area is conducted and the proposed recovery values per each item are compared to exact field market values. Finally. more realistic and accurate recovery cost guideline including evaluation and more effective market surveying method are suggested here. A theoretical and practical program for systematic recovery cost calculation is proposed and expected to be used at public institution before long.
상용프로그램용 Subroutine 부착모델을 이용한 동결융해에 의한 FRP-콘크리트 부착-슬립 거동에 대한 해석적 평가
정우영,김남정,Jung. Woo Young,Kim. Nam Jung 한국방재학회 2012 한국방재학회논문집 Vol.12 No.1
본 연구는 FRP 휨 부착 보강공법을 적용한 콘크리트 구조물에 대하여 부착경계면의 동결융해에 의한 장기부착특성과 이들 부착에 따른 전체구조물의 거동을 조사하기 위한 해석적 연구로서 기존 연구에서 제안된 여러 가지 비선형 부착-슬립 거동특성을 바탕으로 수치해석용 비선형 부착-슬립 Subroutine을 제안하였다. 제안된 상용해석용 수치모델의 타당성 검증을 위하여 기존 검증된 역학적 모델식에서 산출된 값들과 그 결과를 비교하였으며 이를 통하여 실제 부착구조물에 휨 보강부착 시 전체구조물의 구조해석 및 거동평가를 수행하였다. 본 연구의 해석결과에서 제시된 동결융해에 따른 부착경계면의 거동의 경우 부착면의 부착력 저하로 인하여 최대부착응력과 FRP 표면응력이 점차적으로 감소함을 알 수 있었고 이로 인한 허용부착하중 또한 감소하는 것으로 예측되었다. 이는 동결융해에 따른 보강효과 감소를 의미하는 것으로서 향후 보다 정확한 거동분석을 위한 실험적 연구와 병행하여 수행될 필요성이 있을 것으로 판단된다. This research presents an analytical evaluation of the long-term bonding behavior at the interface between concrete and FRP under freeze-thaw environments and overall structural performance in the RC structure reinforced by FRP. To predict overall structural performance of the structure, a nonlinear bond-slip subroutine is proposed and verified for its availability with comparison of the previous experimental results. Finally, analytical results indicate that the maximum stress of the interface and the surface stress on the FRP skin plate were reduced gradually under freeze-thaw environments. It is evidence that the bonding capacity at the interface between concrete and FRP may be decreased as the exposure for the freeze-thaw environments is increased. To make more accurate results, more advanced works for analytical subroutine are performed and experimental results will be compared and discussed in the future.
Fe-P-(Mo,Mn)계 소결분말 합금에서 Si 첨가에 따른 기계적 특성 변화에 대한 연구
정우영,박동규,고병현,박진우,안인섭,Jung, Woo-Young,Park, Dong-Kyu,Ko, Byung-Hyun,Park, Jin-Woo,Ahn, In-Shup 한국분말야금학회 2016 한국분말재료학회지 (KPMI) Vol.23 No.5
A lean alloy is defined as a low alloy steel with a minimum amount of the alloying element that maintains the characteristics of the sintered alloy. It is well known that the addition of elements such as Cr, P, Si, or Mn improves the mechanical characteristics of the alloy, but decreases the sinterability. The mother alloy is used to avoid an oxidation reaction with the alloying elements of Cr, P, Si or Mn. The purpose of this study is to determine the change in the mechanical properties of Fe-P-Mo and Fe-P-Mn alloys as a result of the addition of Si. In this article, the Fe-P-Mo and Fe-P-Mn alloys to which Si is added are compacted at $7.0g/cm^3$ and then sintered in $H_2-N_2$ at $1120^{\circ}C$. The P around the macropores and large grains reduces due to the formation of $SiO_2$ as the Si content increases. This is caused by the increase in strength owing to reducing intergranular fracture by suppressing the reaction with oxygen.
복합재료 트러스 교량시스템의 정적거동 및 파괴모드에 관한 해석적 연구
정우영,이형길,Jung, Woo-Young,Lee, Hyung-Kil 한국전산구조공학회 2007 한국전산구조공학회논문집 Vol.20 No.5
본 연구는 복합재료 교량시스템의 규준 정립을 위한 연구로서 실제 설계 시공되어진 복합재료 교량의 정밀해석수행과 이를 통한 복합재료 교량의 파괴거동 및 설계기준 등을 조사하는데 그 목적이 있다. 본 연구의 효율적인 연구를 위하여 실제 미국 NEW YORK주 내에 설계 시공되어있는 Noncomposite-FRP 복합재료 교량을 대상으로 해석적 연구를 수행하였으며 본 연구에서 사용된 해석적 모델을 토대로 실제 미국에서 기 수행되어진 교량 거동에 관한 해석 및 실험하중 평가와 그 결과를 비교하였다. 특히 국내 복합재료 교량의 해석적 설계기준 평가를 위하여 보다 실질적이고 정확한 파괴모드의 조사 및 분석이 요구되어지므로 본 연구에서는 이를 위하여 기존의 해석적 연구에서 가벼운 중량으로 인하여 무시되었던 자중의 영향과 각 적층 layer에 설계된 ply orientation을 고려하여 해석하였다. 그 결과 자중을 고려한 복합재료 패널들의 경우, 제작 결함에 따른 이음부 파괴가 없을 경우 교량 상부 구조 중 횡축 보에서의 국부 좌굴 파괴가 교량의 파괴를 지배할 것으로 본 연구결과에서 예측되었다. 이는 복합재료 교량 제작 시 복합재료 상판 패널과 보의 이음부가 Noncomposite로 제작되는 경우 실제 제작되어진 복합재료 상판의 고 강성에 의하여 재하 하중에 의한 하부 강재 거더 좌굴이 선행되는 것으로 판단된다. There is a concern with worldwide deterioration of highway bridges, particularly reinforced concrete. The advantages of fibre reinforced plastic(FRP) composites over conventional materials motivate their use in highway bridges for replacement of structures. Recently, an FRP deck has been installed on a state highway, located in New York State, as an experimental project. In this paper, a systematic approach for analysis of this FRP deck bridge is presented. Multi-step linear numerical analyses have been performed using the finite element method to study the structural behavior and the possible failure mechanism of the FRP deck-superstructure system. Deck's self-weight and ply orientations at the interface between steel girders and FRP deck are considered in this study. From this research, the results of the numerical analyses were corroborated with field test results. Analytical results reveal several potential failure mechanism for the FRP deck and truss bridge system. The results presented in this study may be used to propose engineering design guideline for new and replacement FRP bridge deck structure.
Fe-(Mo-Mn-P)-xSi계 합금의 성형밀도에 따른 소결거동
정우영,옥진욱,박동규,안인섭,Jung, Woo-Young,Ok, Jin-Uk,Park, Dong-Kyu,Ahn, In-Shup 한국분말야금학회 2017 한국분말재료학회지 (KPMI) Vol.24 No.5
The addition of a large amount of alloying elements reduces the compactibility and increases the compacting pressure, thereby shortening the life of the compacting die and increasing the process cost of commercial PM steel. In this study, the characteristic changes of Fe-Mo-P, Fe-Mn-P, and Fe-Mo-Mn-P alloys are investigated according to the Si contents to replace the expensive elements, such as Ni. All compacts with different Si contents are fabricated with the same green densities of 7.0 and $7.2g/cm^3$. The transverse rupture strength (TRS) and sintered density are measured using the specimens obtained through the sintering process. The sintered density tends to decrease, whereas the TRS increases as the Si content increases. The TRS of the sintered specimen compacted with $7.2g/cm^3$ is twice as high as that compacted with $7.0g/cm^3$.
사군자탕(四君子湯) 및 사군자탕가반묘(四君子湯加斑猫)가 위암세포에 미치는 영향
정우영,류봉하,김진성,윤상협,류기원,신현수,Jung, Woo-Young,Ryu, Bong-Ha,Kim, Jin-Sung,Yoon, Sang-Hyub,Ryu, Ki-Won,Sin, Hyeon-Su 대한한방내과학회 2001 大韓韓方內科學會誌 Vol.22 No.4
The efficacy of Sagunja-tang and Sagunja-tang plus Mylabris phalerata against the human stomach cancer was examined and molecular biological fight of its actions was studied. In the efficacy test of anti-stomach cancer cells growth using the MTT assay, administration of Sagunja-tang resulted in no significant change of stomach cancer cells growth, with the control group. Administration of Sagunja-tang plus Mylabris phalerata resulted in a decrease of stomach cancer cells growth in proportion to the concentration of mylabris phalerata and time, which was significantly different from the control group(significance recognized when p<0.05). In the test using the apoptosis assay, administration of Sagunja-tang showed an increase in apoptosis of human stomach cancer cells, with no significant difference from the control group. Administrating Sagunja-tang plus Mylabris phalerata showed an increase in apoptosis of stomach cancer cells in proportion to the concentration of mylabris phalerata and time, which was significantly different from the control group(significance recognized when p<0.05). In the test using the quantitative RT-PCR to examine stomach cancer cells growth and revelation of apoptosis related genes, administrating Sagunja-tang plus Mylabris phalerata resulted in a decrease of Bcl-2, an anti-apoptosis gene, in proportiong to concentration. No significant change was examined in the revelation of CDK1, Cdc2, Cyclin D1, PCNA, c-myc, which are genes related to the stomach cancer cells growth, and Bax, Bel-XL, the genes related to apoptosis, and p53. Referring to the results above, Sagunja-tang plus Mylabris phalerata may be considered to have an anti-growth efficacy against human stomach cancer cells, and an inducement efficacy. Therefore, it can be clinically implemented in the human stomach cancer.
철근부식 팽창 및 비부착 구간에 따른 RC 부재의 휨 성능 평가
정우영,백상훈,연종호,Jung,Woo-Young,Beak,Sang-Hoon,Yeon,Jong-Ho 한국방재학회 2008 한국방재학회논문집 Vol.8 No.5
본 논문은 염해에 의한 부착성능 저하에 따른 철근-콘크리트 국부 비부착 구간 변화에 따른 보의 휨 실험 및 해석적 연구이다. RC보의 휨 실험 및 해석적 연구를 통하여 부착강도 및 부식정도에 대한 휨 강성을 평가, 분석하였다. 철근부식에 따른 국부적 부착손상 구간을 표현하기위하여 본 연구에서는 고무호스를 이용한 비부착 구간 모사 시험체를 제작, 염해에 의한 철근콘크리트 보의 국부 부식구간을 표현하였고 이에 대한 휨 성능을 평가하였다. 해석적 연구에서는 상용해석프로그램을 이용한 성능평가와 균열해석을 수행하여 국부적 부착구간 변화에 따른 균열 폭, 균열깊이, 위치를 파악함으로써 실제 실험결과와의 균열 확산을 예측, 비교하였다. 본 연구의 부식정도 및 국부적 비부착 구간 확대에 따른 실험적, 해석적 철근부식-강성변화율은 향후 노후 철근콘크리트 구조물의 국부적 손상 모델의 개발 및 평가에 있어 기초자료로 활용될 수 있을 것이다. This paper presents experimental and analysis studies about both the corroded steel expansion and the variation of poor bonding range between steel and concrete. A loss of overall bonding capacity at the concrete-steel interface is evaluated experimentally and crack patterns at the bottom of the concrete are presented here. Steel-concrete interface is covered by rubber due to present local loss of the concrete-steel interface bonding capacity. In case of crack analysis performed by commercial FEM programs. we investigated crack‘s pattern and location. Finally, it is concluded that overall flexural capacity of the reinforced concrete structure is increased by the corroded steel expansion and is dependent of the bonding range at the steel- concrete interface. These results give an important factor to decide a life of reinforced concrete structures.