미립액상법을 위한 PECVD 반응로설계

정용선,오근호 한국결정성장학회 1997 한국결정성장학회지 Vol.7 No.2

$YBa_2Cu_3O_x$ 고온 초전도체 상을 MgO 단결정위에 증착시키기 위하여 액상의 에어로 졸 입자를 저온 플라즈마의 화학증기 증착로안에 유입하였다. 플라즈마의 분포를 조절하기 위한 반응로의 설계에 따라 초전도체상의 미세구조가 변화하는 양상을 관찰하였으며, 이때 증착 기판 위에서 관찰되는 입자들의 생성원인에 대하여 고찰하였다. 입자생성의 주된 원인으로는 불안정한 플라즈마의 분포와 출발원료의 낮은 기화속도에 기인하는 것으로 나타났다. 또한 증착속도는 출발원료가 기화되는 곳으로부터 멀어질수록 급격히 감소하는 것으로 밝혀졌다. The high-$T_c$ superconducting phase, $YBa_2Cu_3O_x$, was deposited on the single crystal MgO substrate, using a liquid aerosol feed method in a plasma enhanced chemical vapor deposition(PECVD) reactor. The effect of the plasma distribution depending on the design of a reactor was studied by the analysis of the microstructures of thin films. The particles landed were frequently observed on the films and the two causes that were responsible for the particle deposition were explained. The particles were deposited by the unstable and non-uniform plasma and the low evaporation rate of the precursors. Also, the thin film deposition rate decreased significantly as the distance between the evaporating location and the substrate increased.

영미목록규칙 제2판의 개정규칙과 변경사항에 대한 고찰

정용선 韓國圖書館學會 1980 圖書館學 Vol.7 No.1

The second edition of the Anglo-American Cataloguing Rules (AACR 2) was published in December 1978. In 1974 representatives of five bodies from Canada, the United Kingdom and the United States established the Joint Steering Committee for Revision of AACR, and set the aims, structure, and content of AACR 2. Although the goal of a single text for Britain and North America was achieved in AACR 2, the American library community expressed concern about cost-effectiveness of adoption of the new code, and consquently the LC implementation plan called for some minor departures from AACR 2. LC's plan to depart from a number of provisions of the new code will cause a continuation of the problems presented by past practices of superimposition. The purpose of this paper is to examine the revisions made in AACR 2 in the hope that it will contribute to efforts of Korean librarians seeking to focus on the major questions requiring discussion and decisions before adoption of AACR 2 by Korean research libraries who have already Anglo-American Cataloging Rules for Western materials. In this paper attempts were made to follow the order of subjects treated in the code, beginning with general revisions, followed by a discussion of each of the parts of the code, the first for bibliographic description and the second for choice and form of access points. The differences between AACR 1 and AACR 2 that will be most significant to cataloguers are compared with examples. Comparative analysis of optional and alternative rules are viewed from a historical background, and their practical applications for the different types of libraries / or materials are discussed. Specifications of the options adapted by the Library of Congress are presented. Adaption of AACR 2 poses continual problems in Korea. It is very important to maintain consistent sets of information consistently presented in the catalogue regardless of its language. The recognition by cataloguers of the urgent need for conformity and campatability of catalogue between Western materials and Oriental materials is recommended, if AACR 2 is to be adapted. It would be intolerable for the catalogue users, if different standards of description and headings were to apply in the same catalogue

아동전문병원 입원환아 부모의 병원서비스 만족도

정용선,김진선 한국아동간호학회 2005 Child Health Nursing Research Vol.11 No.3

Purposes: The purposes of this study were to evaluate parent satisfaction with inpatient hospital services in children's hospitals and to identify variables related to parent satisfaction. Method: A descriptive correlation study was conducted. Parents of 165 children who were inpatients in two children's hospitals participated in the study. Data were collected using structured questionnaire at the time of discharge. For statistical analysis, t-test, ANOVA, and Pearson correlation analysis were used. Results: The highest parent satisfaction domain was nursing service, and the lowest parent satisfaction domain was hospital service and accommodations. Parents were less likely to be satisfied with hospital facilities, equipment, noise and cleaning and less likely to be satisfied with the lack of information they received and with the lack of communication with health care professionals. Parents with longer length of stay and with older children reported higher satisfaction than their counterparts. Moreover, parent satisfaction was related to their intention to revisit and related to intention to recommend this surveyed hospital over others. Conclusions: Efforts to improve parent satisfaction in children's hospital service and accommodation are needed to improve the quality of health care. Communication by health care professionals with parents and a partnership between parents and health care professionals are necessary to improve quality of care.

한국보험공사의 임무와 업무개요

정용선,Jeong, Yong-Seon 한국화재보험협회 1978 防災와 保險 Vol.10 No.-

영미목록규칙 제2판의 개정 규칙과 변경사항에 대한 고찰

정용선,Chung Yong Sun 한국문헌정보학회 1980 한국문헌정보학회지 Vol.7 No.-

The second edition of the Anglo-American Cataloguing Rules (AACR 2) was published in December 1978. In 1974 representatives Qf five bodies from Canada, the United Kingdom and the United States established the Joint Steering Committee for Revision of AACR, and set the aims, structure, and content of AACR 2. Although the goal of a single text for Britain and North America was achieved in AACR 2, the American library community expressed concern about cost-effectiveness of adoption of the new code, and consquently the LC implementation plan called for some minor departures from AACR 2. LC's plan to depart from a number of provisions of the new code will cause a continuation of the problems presented by past practices of superimposition. The purpose of this paper is to examine the revisions made in AACR 2 in the hope that it will contribute to efforts of Korean librarians seeking to focus on the major questions requiring discussion and decisions before adoption of AACR 2 by Korean research libraries who have already adopted Anglo-American Cataloging Rules for Western materials. In this paper attempts were made to follow the order of subjects treated in the code, beginning with general revisions, followed by a discussion of each of the parts of the code, the first for bibliographic description and the second for choice and form of access points. The differences between AACR 1 and AACR 2 that will be most significant to cataloguers are compared with examples. Comparative analysis of optional and alternative rules are viewed from a historical background, and their practical applications for the different types of libraries / or materials are discussed. Specifications of the options adapted by the Library of Congress are presented. Adaption of AACR 2 poses continual problems in Korea. It is very important to maintain consistent sets of information consistently presented in the catalogue regardless of its language. The recognition by cataloguers of the urgent need for conformity and campatability of catalogue between Western mateirals and Oriental materials is recommended, if AACR 2 is to be adapted. It would be intolerable for the catalogue users, if different standards of description and headings were to apply in the same catalogue.

종합대학 도서관장서의 적정량기준 설정에 관한 고찰 -미국의 종합대학도서관기준을 중심으로-

정용선,Chung Young Sun 한국문헌정보학회 1981 한국문헌정보학회지 Vol.8 No.-

Library standards have been the source of considerable controversy, whereas many problems are involved in developing stardard for university library collections. For evaluation purposes, standards should be precise, quantifiable and measurable. In the United States, however, standards for academic libraries are limited to qualitative statements and principles. Quantitative standards, when given, are ususally related to the number of population in the institution being served, or the prescribed quantitative objectives are often arbitrarily formulated by value judgements. The study in this paper attempts to explain the problems involved in developing quantitative standard for academic library collections. Two problems facing in the formulation of the optimal size of collection are identified. One is the theoretically faulty concept of adequacy of collection to meet the situations of diversity of university libraies, and the other is the difficulties in quantification and measurement, along with the lack of concept of adequacy of collection. However, quantification of adequate size of collection is proved to be useful on the pratical level, even though not valid theoretically. ACRL, Clapp/Jordan and Voigt developed formulas or models for setting the optimal size of a library collection for any particular university library. The main purpose of this study is the analysis of the above formulas. ACRL standard was drawn from obervation and analysis of statistcs in leading library collections. In academic field, this judgement appears to have been based on the assumption that a high-grade institution would be apt to have a good library collection. This study criticizes ACRL standard for its failure to include some determinants of measurements, and points out the limitations of the standard. In contrast. Clapp/Jordan developed a formula rather scientifically based upon bibliographical sources. This is similarly empirical but has the advantage of bringing into play the elements which make universities diverse in nature. Both ACRL and Clapp/Jordan formulas share two major defects. (1) the specific subject needs of the collection are not indiacted directly, and (2) percentage rate of growth is an indicator in measuring the potential utility of a collection. Thus both formulas failed to provide a basis for meaningful evaluation. Voigt further developed a model for determining acquisition rates for currently published materials based on bibliographic technique. Voigt model encourages experimentation with different programs and different allocations of input resources, designed to meet the needs of the library's particular population. Standard for university library collections can be formulated in terms of input(traditional indicator), or additionally, in terms of output(cost-effectiveness). Cost effectiveness is expressed as user satisfaction, ability to provide wanted materials within a reasonable time period. Thus simple quantitative method does not cover all the situations of diversity of university library collections, nor measures the effectiveness of collections. Valid standard could not be established without further research.

루프를 이용한 근거리 RFID 리더 안테나

정용선,자르갈사이칸 나이암바얄,신봉섭,고형석,안병철 한국정보기술학회 2014 한국정보기술학회논문지 Vol. No.

This paper proposes a near-field RFID reader antenna based on a loop. The proposed antenna consists of a loop loaded with inductors and resistors, a top ground plane for adjusting the far-field gain, a balun and a metal housing. The near magnetic field is generated by a loop consisting of a circular wire and two orthogonal linear wires. Four inductors are placed on the loop to reduce the loop size and four resistors are used to obtain an impedance matching and to control the near magnetic field strength. A ground plan is placed around the loop to reduce the far-field gain of the antenna. A special balun structure is employed to reduce the radiation from the feeding coaxial cable. The loop and the feeding coaxial cable are placed in a metal housing to produce the near magnetic field only in the region just above the antenna. The antenna is optimally designed using a commercial software, then fabricated and tested. The fabricated antenna has a reflection coefficient less than -10dB over 903-921MHz, a far-field gain of -14.5dB, an H-field of 0.38A/m at 40mm above the antenna surface and a tag read distance up to 630mm when a power of 25dBm is supplied to the antenna. 본 논문에서는 루프를 이용한 근거리 RFID 리더 안테나를 제안하였다. 제안된 안테나는 인덕터와 저항으로 장하된 루프, 원거리 이득 조정용 상부 접지판, 벌룬 및 금속 하우징 등으로 구성된다. 근거리 자기장은 원형 도선과 2개의 교차 도선으로 구성된 루프에 의해 생성된다. 루프 상에 4개의 인덕터를 배치하여 루프의 크기를 소형화하였으며 4개의 저항을 사용하여 임피던스 정합을 얻고 동시에 근거리 자기장 세기를 조정하였다. 루프 주위에 접지판을 배치하여 안테나의 원거리 이득을 감소시켰다. 동축 급전선에 의한 방사를 억제하기 위해 특수한 벌룬 구조를 적용하였다. 근거리 자기장이 안테나 바로 위 영역에서만 생성되도록 루프와 급전 동축선을 금속 하우징 내에 설치하였다. 상용 소프트웨어를 이용하여 안테나를 최적 설계한 후 이를 제작하여 시험하였다. 제작된 안테나는 903-921MHz에서 -10dB이하 반사계수, -14.5dB의 원거리 이득을 보였으며, 25dBm의 전력 인가 시 안테나 표면으로 40mm 떨어진 위치에서 0.38A/m의 자기장 세기, 630mm의 태그 인식거리를 보였다.

미립액상 분말에 의한 $YBa_{2}Cu_{3}O_{x}$ 초전도체의 PECVD 증착법

정용선,오근호 한국결정성장학회 1996 韓國結晶成長學會誌 Vol.6 No.2

액상의 미립자를 이용하여 저온 플라즈마 반응로 안에서 $YBa_{2}Cu_{3}O_{x}$ 초전도체상을 MgO 단결정 위에 in-situ 증착하였다. 금속화합물의 용해도, 분해온도와 용매의 증기압이 이공정 방법에서 중용한 인자로 나타났으며, 초전도체상의 증착실험 조건은 산소분압이 0.3에서 2.7 kPa, 증착온도가 $800^{\circ}C$에서 $940^{\circ}C$까지이었다. 초전도체상을 위한 최적의 증착조건은 CuO 상전이선에 근접하게 나타났다. The superconducting phase, $YBa_{2}Cu_{3}O_{x}$ (YBCO), was in-situ deposited on the single crystal MgO substrates, using an aerosol decomposition process in a cold plasma reactor. The solubility and decomposition temperature of the chemical precursors, and the vapor pressures of the solvents, were determined to be the factors crucial to achieving a stoichiometric, crystalline YBCO phase. The deposition parameters for the YBCO phase were 0.3 to 2.7 kPa for the oxygen partial pressure and $800^{\circ}C$ to $940^{\circ}C$ for the substrate temperature. The optimum deposition conditions for the YBCO phase were observed along the CuO decomposition line.

도시철도용 비상방송시스템을 위한 무선통신 안테나 연구

정용선,장수현 한국정보기술학회 2019 한국정보기술학회논문지 Vol.17 No.10

본 논문에서는 도시철도 운행환경에서 사용되는 무선통신 기반의 비상방송시스템에 적합한 안테나를 설계하였다. 열차 운행환경이 열악하기 때문에 장치의 안정적인 성능을 위해서는 안테나 특성이 중요하다. 설계된 안테나는 실제 차량에 설치하여 통신시험을 진행하였다. 통신시험 결과 설계된 안테나는 불안정한 통신성능을 보였다. 이를 개선하기 위하여 안테나 높이와 기생소자를 개선하였다. 개선된 안테나는 실제 차량형상에 적용하여 초기 설계된 안테나와 시뮬레이션을 통해 비교하여 성능을 확인하였다. 개선된 안테나는 초기 설계된 안테나에서 발생한 차량 중앙 부근의 null point와 불안정한 이득패턴을 보완하였다. 개선된 안테나는 철도차량환경에서 안정적인 무선통신망을 구축할 것으로 보인다. This paper presents a suitable antenna for emergency broadcasting system based on wireless communication in metro environments. The antenna characteristics are important for stable performance of device due to the poor train operating environment. The designed antenna was installed in a real vehicle and the communication test was conducted. As a result of the communication test, the designed antenna showed unstable communication performance. In order to improve antenna performance, the antenna height and the parasitic element were improved. The improved antenna is applied to actual vehicle shape and compared with the initially designed antenna through simulation. The improved antenna compensates for the null point near the center of the vehicle and the unstable gain pattern from the initially designed antenna. The improved antenna is expected to establish a stable wireless communication network in the rail vehicle.

학술행사 : 심포지엄 2 / 여성의 고용문제와 남 녀의 고용평등법 ; 부록 1 / 여성학 강의요목 ( 1 , 2 학기 ) ; 가정과 여성

정용선 부산대학교 여성연구소 1989 여성학연구 Vol.1 No.1

N/A N/A