http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
정성택,Berg,John C 한국화학공학회 1972 Korean Chemical Engineering Research(HWAHAK KONGHA Vol.10 No.4
Experimental data on surface diffusion coefficients are obtained for monolayers of myristic, pentadecylic, palmitic, stearic and oleic acids formed on 0.01N HCl aqueous substrates at 22.3℃ using a radioactive tracer technique. Each of these acids is studied at various monolayer concentrations with reference to surface pressure-area isotherms.
양성 골종양의 절제 및 소파술 후 사용한 골이식 대체물의 결과 및 분석
정성택,서형연,선종근,이재준,김성식,Jung, Sung-Taek,Seo, Hyoung-Yeon,Seon, Jong-Keun,Lee, Jae-Joon,Kim, Seung-Sik 대한근골격종양학회 2003 대한골관절종양학회지 Vol.9 No.2
목적: 양성 골종양을 치료하기 위해 골이식 대체물을 이식하였을 때 골 유합을 얻을 수 있는지 여부와 골 이식 대체물 중 황산칼슘(calcium sulfate)과 수산화인회석 (hydroxyapatite)을 이용하여, 골 이식술 후 유합 정도를 비교하여 골 치유 과정에 대한 두가지 골 이식 대체물의 차이점을 보고하고자 한다. 대상 및 방법: 양성 골종양 환자 중 병소의 소파술 시행 후 골 이식 대체물을 이식한 20례를 대상으로 술전후 단순 방사선 소견상 병소 크기, 신생골의 형성, 병소의 재발 여부와 이식 후 조직학적 소견을 관찰하였다. 결과: 총 20례 중 남자가 13례, 여자가 7례였으며 평균 연령은 15.8세(2~5), 술 후 평균 추시 기간은 3년이었다. 방사선 사진상 병소의 면적은 평균 30.7 $cm^3$였으며, 최종 추시상 전체 20례 중 19례에서 성공적인 결과를 보였으며, 1례에서 병소의 재발을 보였다. 나이, 병소 크기와 병변 종류에 따른 차이는 관찰되지 않았다. 결론: 황산칼슘은 생체 적합성이 뛰어나고, 골 전도 작용이 있으며 새로운 골형성에 비례하여 생체내로 흡수되는 특성을 보였고, 이에 반해 수산화인회석은 골 전도 작용이 있지만, 병변의 크기나 주위 환경에 따라 자가골, 자가 골수 이식, 이종골과 병행 사용시 양호한 골치환 결과를 얻을 수 있을 것으로 사료되며, 황산칼슘에 비해 더 느리게 생체내로 흡수되는 결과를 보였다. Purpose: The purpose of this study was to determine if bony union can be obtained when a bone graft substitute is transplanted in order to treat a benign bone tumor and if there is a difference between calcium sulfate and hydroxyapatite in the healing procedure when the degree of the bony union after the bone graft are compared. Materials and Methods: This study selected 20 cases, in which a curettage on the benign bone tumors was conducted and a bone graft substitute was transplanted. The area of the focus, the new bone formation, the recurrence of the focus in the plain radiographs and histological findings were observed. Results: Twenty cases (13 males, 7 females) were evaluated. Their mean age at surgery was 15.8 years (2~45), and the mean follow-up period was 3 years. The mean area of focus was 30.7 $cm^3$ in the radiographs, and 19 cases showed successful results in the ultimate visit, while 1 case has a recurrence of the focus. Conclusion: Calcium sulfate has osteoconduction and superior bioavailability, and is absorbed in vivo in proportion to the new bone formation. On the other hand, hydroxyapatite has good osteoconduction. It can result in better bone formation when it is combined with an autologous bone graft, autologous bone marrow, and an allogenic bone graft, but is absorbed in vivo more slowly than the former.
임신중 발생한 원발성 부갑상선 기능 항진증을 동반한 상완골 근위부의 Brown tumor
정성택,김현종,이담선,박기헌,Jung, Sung-Taek,Kim, Hyun-Jeong,Lee, Dam-Seon,Park, Gi-Heon 대한근골격종양학회 2007 대한골관절종양학회지 Vol.13 No.2
Brown tumor는 부갑상선 기능 항진증에 의한 골격의 종양유사병변으로 드물게 보고되는 질환이다. 저자들은 29세 여자환자의 상완골 근위부에 발생한 일차성 부갑상선 기능항진증에 의한 brown tumor에 대해 보고하고자 한다. 내원 3개월전부터 상박부 동통 및 부종을 주소로 내원한 환자로 골조직 검사상 거대세포종양이 의심되었으며 광범위 변연절제술 및 종양대치물을 이용한 재건술을 시행하였다. 술후 다발성 관절통 및 전신 무력감 호소하였으며 혈액검사 및 방사성 동위원소검사에서 부갑상선 선종에 의한 일차성 부갑상선 기능항진증 진단되었다. 일차성 부갑상선 기능항진증에 의한 brown tumor로 진단 후 부갑상선 선종의 외과적 절제술 시행하였으며, 수술 후 임상적 증세의 호전을 보인 증례이다. 이에 문헌 고찰과 함께 보고하고자 한다. Brown tumor is tumor like lesion resulted from hyperparathyroidism, and it has been rarely reported recently. We evaluated a 29-year-old woman who had brown tumor on proximal humerus caused by primary hyperparathyroidism. She first had presented pain and swelling over the upper arm, and was suspected as giant cell tumor in biopsy combined with hyperparathyroidism. Wide marginal excision and tumor prosthesis were performed. However, it was confirmed as brown tumor resulted from parathyroid adenoma according to laboratory findings and radioactive isotopes image, and surgical excision of adenoma relieved clinical symptoms. We report this case with a review of literatures.
전해연마를 적용한 미세 마이크로 니들의 표면 향상에 대한 연구
정성택,김현정,위은찬,공정식,백승엽 한국금형공학회 2019 한국금형공학회지 Vol.13 No.3
As the consumer market in the mold, automation and aerospace industries grows, the demand for chemical machining using on electrochemical polishing increases. To enhance the surface roughness and gloss of the micro-needle, we have studied for an electrochemical polishing. Electrochemical polishing requires the chemical reaction of solution and material according to the electrolyte and electrode. In this study, sulfuric acid(30%), phosphoric acid(50%), and DI-water(20%)were used as the electrolytic solution, and the electrolytic solution temperature used 58 ℃. Electrochemical polishing was carried out in experimental conditions, and the micro-needle experiment was carried out from the basic experiment to obtain the experimental conditions. Experimental results show that as the voltage and current increase, the surface roughness improved and the gloss is improved. So, the best result for this experiment was obtained in condition 6, which improved micro-needle.
친환경 소재를 이용한 화장품 쿠션 팩트 용기의 힌지 설계와 사출 성형 시뮬레이션
정성택,김현정,위은찬,이중배,김민수,백승엽 한국금형공학회 2019 한국금형공학회지 Vol.13 No.3
As the consumer market in the cosmetic, vehicle manufacturing and aerospace industries grows, the demand for manufacturing industries using on injection mold technology. Also, such manufacturing technology of metal machining is expensive, and the shape is limited. Cosmetic cushion fact products are divided into outer relevant to the exterior of the product and inner containers containing the actual contents. In the case of the inner container, it needs to be combined with the upper and lower cases. As environmental regulations are strengthened internationally, the use of a large number of component parts can result in significant losses in recycling and economics. Therefore, this study aims to perform injection molding analysis through injection molding simulation to develop a cushion fact container that can be recycled through the unification of products and materials using polypropylene to cope with environmental regulations. In the case of injection molding conditions, Injection Time(sec): 4.5, Cooling Time(sec): 13, Resin Temperature(℃): 240, and Pressure(MPa): 30 were determined. The results of injection molding simulation according to the two design methods were compared with the sync mark which shows the problem of filling and injection molding.
단결정 다이아몬드공구 제작 기술을 통한 초정밀 미세패턴 가공 연구
정성택,송기형,최영재,백승엽,Jung, Sung-Taek,Song, Ki-Hyeong,Choi, Young-Jae,Baek, Seung-Yub 한국금형공학회 2020 한국금형공학회지 Vol.14 No.3
As the consumer market in the VR(virtual reality) and the head-up display industry grows, the demand for 5-axis machines and grooving machines using on a ultra-precision machining increasing. In this paper, ultra-precision diamond tools satisfying the cutting edge width of 500 nm were developed through the process research of a focused ion beam. The material used in the experiment was a single-crystal diamond tool (SCD), and the equipment for machining the SCD used a focused ion beam. In order to reduce the influence of the Gaussian beam emitted from the focused ion beam, the lift-off process technology used in the semiconductor process was used. 2.9 ㎛ of Pt was coated on the surface of the diamond tool. The sub-micron tool with a cutting edge of 492.19 nm was manufactured through focused ion beam machining technology. Toshiba ULG-100C(H3) equipment was used to process fine-pattern using the manufactured ultra-precision diamond tool. The ultra-precision machining experiment was conducted according to the machining direction, and fine burrs were generated in the pattern in the forward direction. However, no burr occurred during reverse machining. The width of the processed pattern was 480 nm and the price of the pitch was confirmed to be 1 ㎛ As a result of machining.
정성택,정재윤,선종근,조상권,김기형,Jung, Sung-Taek,Chung, Jae-Yoon,Seon, Jong-Keun,Cho, Sang-Gwon,Kim, Ki-Hyeoung 대한근골격종양학회 2004 대한골관절종양학회지 Vol.10 No.1
목적: 골연부조직에 발생한 종양 중 비골신경과 함께 종양 절제술을 시행받은 7명의 치료경험을 보고하고자 한다. 대상 및 방법: 종양이 발생한 비골 근위부 골육종 3예, 연골육종 2예 및 하퇴부 악성조직구 섬유종 2예였다. 비골 신경 절제술후 4예에서는 단하지 보조기를 착용하였으며, 3예에서는 후경골근 배부 이전술을 시행하였다. 후경골근 배부 이전술을 시행한 3예에서는 단하지 보조기 착용없이 능동적 보행이 가능하였다. 결과: 종양과 함께 절제한 비골신경 손상시 보행기능 개선을 위해서는 적극적인 수술적 치료방법이 시도되어야 할 것으로 사료된다. We retrospectively reviewed the cases of peroneal nerve palsy in seven patients after musculoskeletal tumor resection. Their mean age was 38 years. Three had osteosarcoma in proximal fibula, 2 had chondrosarcoma in proximal fibula and calf and 2 had malignant fibrous histio cytoma in calf. Four of 7 patients had been managed using active dorsiflexion brace. Three patients who underwent tibialis posterior transfer and could walk without brace were able to discontinue the use of the orthosis. Peroneal nerve palsy after wide excision of tumor including peroneal nerve can not resolve spontaneously and results in severe functional disability. To improve the gait function, active surgical treatment should be considered.
소아에서의 성장 예측: 골종양의 치료와 관련된 소아 하지 부동
정성택,정광철,박형원,Jung, Sung-Taek,Jeong, Kwang-Cheul,Park, Hyeong-Won 대한근골격종양학회 2011 대한골관절종양학회지 Vol.17 No.1
악성 골종양의 치료의 주된 목적은 장기 생존기간을 연장 및 삶의 질적 개선이나, 소아의 경우 골격 성장이 지속되어 종양 치료 후 성장 완료 시 나타나는 하지 부동(leg length discrepancy)이 치료에 있어 중요한 문제 중 하나이다. 성장기 소아의 하지 부동을 치료하기 위해서는 먼저 소아의 정상적인 성장에 대한 정확한 이해가 필요하며, 성장 과정에서의 하지 부동의 정도를 예측하는 것은 이에 대한 수술적 치료의 시기 및 방법의 선택에 있어 필수적이다. 또한 이러한 성장 예측 방법들을 적절히 사용하기 위해서는 지속적인 추시 관찰이 필수적이므로 환아의 부모와의 긴밀한 협조 또한 중요할 것으로 생각된다. The main goals of treatment of malignant bone tumor are the prolongation of life survival and the improvement of quality of life. In growing children, however, leg length discrepancy (LLD) is one of major problem in the treatment of malignant bone tumors. Therefore, the precise understanding of growth in children is essential, and the prediction of LLD is critical in deciding the time and options of surgery. In addition, to use the adequate method of growth expectation, periodic follow-up and collaboration with patient's parents are needed.
뇌성마비 환자의 아킬레스건에서 TGF-β 발현 및 콜라겐 조성의 변화
정성택,서형연,이재준,김명선,김양경,김계진 대한정형외과학회 2004 대한정형외과학회지 Vol.39 No.6
Purpose: This study measured the expression level of the transforming growth factor- (TGF- ) isoform expression and the collagen composition within the Achilles tendon from cerebral palsy (CP) patients. Materials and Methods: The Achilles tendons were obtained from 15 CP patients with spastic equinovarus. The presence of the TGF- isoform and the composition of the collagen were examined histologically, performing by immunohistochemical staining (IHS) and determining the mRNA expression level using a reverse transcriptase polymerase chain reaction (RT-PCR). Results: IHS revealed the presence of TGF- 1 and TGF- 2 expression in 2/15 cases and 4/15 cases respectively, and weak TGF- 3 expression in 7/15 cases. The TGF- 1 and TGF- 2 expression levels were uniform in all 15 cases according to RT-PCR, while TGF- 3 expression was observed in 8 out of 15 cases. IHS and RT-PCR showed strong TGF- 3 expression in 6/7 non-ambulatory patients. An immature form of collagen, type III collagen, was observed more abundantly in the non-ambulatory patients. Conclusion: These results suggest that contracture in CP may induce changes in the type of collagen via growth factors such as TGF- . 목 적: 뇌성마비 환자의 아킬레스건 내 TGF- isoform의 발현 정도와 콜라겐 구성을 알고자 하였다. 대상 및 방법: 뇌성마비로 인한 경직성 첨족마비 환자 중 수술적 연장술을 시행하였던 15명 환자의 아킬레스건 중앙부를 약 2×2×5 mm3 크기로 채취한 후, 면역조직화학 염색과 RT-PCR을 이용하여 TGF- 와 콜라겐 구성을 조사하였다. 결 과: 아킬레스건 중앙부의 구성은 섬유모세포와 콜라겐 섬유 등의 기질로 구성되어 있었다. 면역조직화학 염색상 TGF- 1과 TGF- 2는 15예 중 각각 2예, 4예에서만 발현되었으며, TGF- 3의 경우는 7예에서 약하게 발현되었다. 경직성이 심 한 비보행성 마비를 보인 7예 중 6예에서 TGF- 3의 양성 소견을 보였다. 콜라겐 염색상 경직성이 심한 비보행성 마비 환 자에서는 상대적으로 미성숙형태인 제3형의 콜라겐이 증가됨을 알 수 있었다. 면역조직화학 염색 및 RT-PCR상 TGF- 3 가 중등도 이상 발현된 7예에서 제3형 콜라겐이 증가되어 있었다. 결 론: 뇌성마비로 인한 지속적인 근 구축은 건내 콜라겐 성분의 변화를 초래하고 이 과정중 TGF- 가 관여할 것으로 사료된다.