http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
전재일,안미경,박원주,이광식,김정배,김민수,Jeon, Jea-Il,Ahn, Mi-Kyoung,Park, Won-Zoo,Lee, Kwang-Sik,Kim, Jung-Bae,Kim, Min-Soo 한국조명전기설비학회 2004 조명·전기설비학회논문지 Vol.18 No.3
본 논문에서는 초고압 전력설비에서의 대전류 측정을 위한 광CT(optical current transformer)개발을 목적으로한 기초 연구를 하였다. 자기장에 의해서 광신호의 편광특성이 변화되는 Faraday 효과를 기본 이론으로 하며, 1310[nm] Laser Diode를 광원으로 사용하고 5[m], 10pm], 20[m]의 길이가 서로 다른 광섬유로 센싱부를 구성하였다. 전류의 측정은 400[A]에서 1300[A]까지의 범위에서 측정하였으며 센싱부를 구성한 광섬유의 길이에 따른 출력 특성을 파악하기 위한 실험을 하였다. 동일한 실험환경에서 각각의 출력의 크기 및 선형성은 인가 전류 및 광섬유의 길이에 비례하여 증가하였으며, 5[m]광섬유를 센싱부로 사용한 것은 최대 -11.1%의 오차율을, 10[m], 20[m]의 경우 각각 최대 -3.5%, 1.7%의 오차율을 나타냈다. In this paper, we took the basic experiment in order to explore the optical CT(optical current transformer) for measuring high current in a superhigh voltage condition. It is based on the faraday effect that changes the polarization characteristic of optical signals by the magnetic field. We used 1310[nm] laser diode for a light source and comprised a sensing part with the optional fiber of 5[m], 10[m], 20[m] length each. The range of current was from 400[A] to 1300[A]. We observed the characteristic of output that changes according to the length of the optical fiber composing the sensing part. The optical fiber of 5[m] length used for the sensing part had -11.1% of the maximum ratio of error and 10[m] and 20[m] length had -3.5% and 1.7% each. This means that the power and linearity of output increase in proportion to the length of optical fiber and applied current in the same experimental condition.
소형수조에서 음향재료의 반향음감소와 투과손실 측정시스템 구성
신미루,조정홍,이경택,김재수,전재진,함일배,강창기,Shin, Mi-Ru,Cho, Jung-Hong,Lee, Kyung-Teak,Kim, Jea-Soo,Jeon, Jae-Jin,Ham, Il-Bea,Kang, Chang-Gi 한국음향학회 2011 韓國音響學會誌 Vol.30 No.2
Since the detection probability is critically dependent on the target strength (TS) in active sonar and on the radiated noise level (RNL) in passive sonar, the acoustic materials for echo reduction (ER) and transmission loss (TL) are widely used for the stealth of underwater targets. In this paper, a measurement system based on the small water tank, for the frequency range of greater than 30 kHz, is developed and verified using reference targets. In order to design the water tank and the geometry of test samples, a program is developed to calculate the arrival time of interfering signals due to the reflection from water tank walls and also due to the diffraction from the edge of the test samples. Considering all the interfering signals, an optimal experimental configuration for water tank and test samples is designed and used throughout the experiment. Next, the signal processing algorithms to estimate ER and TL are developed based on the measured propagation loss reflecting the geometric spreading characteristics of the transducer. Finally, a set of reference targets such as aluminium plate and perfectly reflecting plate are used in a small water tank to verify the developed measurement system. 본 논문은 반향음과 투과음을 감소시키기 위한 평판형 음향재료의 성능평가 장치를 제작하고 측정시스템을 구성하며 표준표적을 이용한 검증을 통해 신뢰성을 확보하는 데 목적이 있다. 반향음감소와 투과손실 측정은 신호간섭이 없도록 대형수조에서 실시되는 것이 일반적이지만, 본 논문에서는 신호간섭을 고려해야 하는 소형수조에서 최저 30 kHz까지 측정이 가능한 측정시스템을 구성하였다. 이를 위해 신호모의를 통해 신호간섭이 없는 최적의 기하학적 배치를 도출하였으며, 획득한 신호를 시간영역과 주파수영역의 총 네 가지 방법으로 ER과 TL을 도출하는 신호처리 알고리즘을 확립하였다. 마지막으로 대형수조에서의 전파손실 실측실험을 통해 측정시스템을 보정하고 알루미늄 판과 스티로폼을 표준표적으로 사용한 측정결과를 Brekhovskikh Layer Model과 비교하여 측정시스템 검증을 수행하였다.
손현목(Hyun-Mok Son),안미경(Mi-Kyoung Ahn),허순영(Soon-Young Heo),전재일(Jea-Il Jeon),박원주(Won-Zoo Park),이광식(Kwang-Sik Lee),김정배(Jung-Bae Kim),김민수(Min-Soo Kim) 한국조명·전기설비학회 2004 한국조명·전기설비학회 학술대회논문집 Vol.2004 No.5월
본 논문에서는 패러데이 효과(Faraday effect)를 이용한 초고압 전력설비에서의 대전류 측정을 위한 광CT의 특성에 대한 기초 연구를 기술하였다. 1310[nm] Laser Diode를 광원으로 사용하고 PIN-Photodiode를 수신부로 사용하였다. 광의 전송로는 파이버 내에서 편광상태를 유지 할 수 있는 30[m]의 싱글모드 파이버를 사용하였다. 전류의 측정은 400[A]에서 1300[A]까지의 범위에서 측정하였으며 온도는 20[℃]에서 50[℃]까지 측정하였다. 동일한 실험 환경 하에서 출력의 크기는 인가전류가 증가할수록, 온도가 낮을수록 비례하여 증가하였다. 온도가 50[℃]의 경우 최대 0.15[%]의 오차율을 나타냈으며, 40[℃], 30[℃], 20[℃]의 경우 각각 최대 오차 0.16[%], 1.24[%], 0.07[%]의 오차율을 보였다.
Faraday 효과를 이용한 광섬유 전류센서에 관한 연구
이정수(Jung-Soo Lee),송시준(Si-Joon Song),전재일(Jea-Il Jeon),박원주(Won-Zoo Park),이광식(Kwang-Sik Lee),김정배(Jung-Bae Kim),송원표(Won-Pyo Song) 한국조명·전기설비학회 2002 한국조명·전기설비학회 학술대회논문집 Vol.2002 No.-
In this paper, we described the laboratory layout of the optical CT in connection with the measurement of large current for the GIS. The aim of this study is the development and application of optical CT based on Faraday effect. It was used He-Ne laser for light source (633nm) and was used PIN-Photodiode for light receiver. The laser source passes through optical fiber in single mode. We used the polarizer to polarize the light source and the beam splitter to divide the output light, and the optical fiber is connected for the measuring the angle polarized in the magnetic field.