http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
전귀,류영기 한국화학공학회 1994 Korean Chemical Engineering Research(HWAHAK KONGHA Vol.32 No.5
공기분리용 고분자 다층복합막을 제조하였다. 코팅물질로는 poly(dimethylsiloxane)과 poly-4-methyl-1-pentene이 사용되었다. 다공성 지지체로는 polysulfone막이 사용되었다. 제조된 막에 대해 압력 및 코팅층의 두께비 변화에 따른 산소와 질소의 투과실험을 행하였고 이를 저항모델에 적용하여 막의 구조, 투과도와 선택도 사이의 관계를 해석하였다. 저항모델로 예측된 투과도 계수와 ideal separation factor 값은 실험치와 대체로 일치하였다. 막양단의 압력차가 5 ㎏/㎠이고 cut의 값이 0.05인 조건으로 ideal separation factor의 값이 3.4인 3층 복합막에 공기를 투과시킴으로서 약 34.5%의 산소부화공기를 얻을 수 있었고 이 때 산소에 대한 투과도는 1.9×10^(-5)[㎤(STP)/㎠·sec·㎝Hg]이었다. Multilayer types of thin film composite(TFC) membranes were prepared. Poly(dimethylsiloxane) and poly-4-methyl-1-pentene were used as a coating material and polysulfone was used for a porous support membrane. Permeation data of oxygen and nitrogen through TFC membranes at different pressure and thickness ratio of coating layer were obtained and the relationship between structure of membranes, permeability and selectivity were analyzed by applying resistance model. The values of permeability coefficient and ideal separation factor predicted by resistance model were well fitted with the experimental data. Oxygen was enriched up to 34.5% in the permeate stream under the condition that pressure difference and cut were 5 ㎏/㎠ and 0.05 respectively. The ideal separation factor of this three-layer TFC membrane was 3.4 and the permeability of oxygen was 1.9×10^(-5)[㎤(STP)/㎠·sec·㎝Hg].
최창균,전귀 한국화학공학회 1986 Korean Chemical Engineering Research(HWAHAK KONGHA Vol.24 No.2
수용액내에 부유하고 있는 화이트카본 미립자의 효율적인 제거를 위한 방법으로 내부원통이 회전하는 수평 쿠엣트 응집기를 사용하여 고분자응집제의 첨가하에서 연속계의 응집현상을 관찰하였다. Taylor 수, 평균속도구배와 교반시간이 응집에 미치는 영향을 실험으로 살펴보았으며 응집 정도는 평균침강속도, 투과도 및 침전물의 체적등으로 측정되었다. 이로부터 응집은 교반시간 초기에 급격히 일어나고, 1000<Ta<2500 영역에서는 약 100초의 최적교반시간이 존재하였으며 Ta ○2300에서 응집이 가장 잘 이루어짐을 밝혔다. Ta>2300 영역에서는 최적교반시간이 지수적으로 감소하는 경향을 나타냈으며 Ta>3400 영역에서는 최적 Gt값이 10⁴으로 거의 일정한 값을 보였다. The continuous flocculation to remove fine particles of White Carbon suspended in the water was investigated experimentally by using the horizuntal Couette flocculator of which the inner cylinder is rotating. The effects of the Taylor number, the mean velocity gradient and the retention time on flocculation caused by a polymer flocculant were examined systematically. The extent of flocculation was decided by measuring the average settling rate, the light transmittance and the volume of sediment. It was found that particles were flocculated very easily at a very short retention time. The optimum retention time was about 100 seconds in the region of 1000 < Ta < 2500 and the best flocculation was produced at Ta ○2300 W hen Ta > 2300, the optimum retention time decreased exponentially and the optimum Gt (root mean square velocity gradient product retention time) values were found to be about 10⁴ in the region of Ta >3400.
쿠엣트 응집기를 이용한 고형물의 응집 및 고 - 액 분리에 관한 실험적 연구
최창균,전귀 한국화학공학회 1990 Korean Chemical Engineering Research(HWAHAK KONGHA Vol.28 No.1
테일러 와류의 형성이 가능한 쿠엣트 응집기에서 수용액 중 고형물의 응집 및 분리특성을 고찰하기 위하여 실리카 및 카올린 현탁입자에 양이온계 고분자 응집제를 투여한 실험계를 대상으로 연속실험을 실시하였다. 최대 분리효율을 얻기 위해 투여되는 고분자 응집제의 최소 농도는 현탁입자 농도의 0.425승에 비례하였으며 고분자 응집제의 현탁입자에 대한 흡착률은 현탁입자의 농도가 증가할수록 감소하였다. 응집물의 파열이 일어나지 않는 범위에서 초기 현탁입자의 농도, 응집 후 침강 분리되지 않은 현탁입자의 농도, 평균 속도구배 및 체류시간을 함수로 하는 경험적 응집속도 모델을 기존의 LaMer-Healy 모델과 Huck-Murphy 모델을 기초로 구하였다. The study on flocculation in a Couette flocculator showing Taylor vortices and subsequent solid-liquid separation characteristics were conducted experimentally. For this study, silica or kaolin suspensions in water were used to investigate flocculation by cationic polymers. The minimum flocculant concentration to show the maximum separation efficiency was found proportional to 0.425-power of the suspension concentration. The adsorption ratio of polymer flocculant on suspended particles decreased as the suspension concentration increased. An empirical flocculation kinetic model without floc breakage was suggested to combine the kinetic model of Huck and Murphy into that of LaMer and Healy. The important parameters were the initial suspension concentration, the unflocculated suspension concentration, the retention time and the root-mean-square velocity gradient.
최창균,전귀 한국화학공학회 1989 Korean Chemical Engineering Research(HWAHAK KONGHA Vol.27 No.6
테일러 와류를 보이는 쿠엣트 응집기를 활용하여 수용액 중 고형물의 응집 및 분리특성을 고찰하였다. 실리카 및 카올린 현탁입자에 양이온계 고분자 응집제를 투여한 연속식 실험계에서 최적 체류시간은 약 150초 정도인 것으로 나타났다. 최적 응집조건을 나타내는 테일러 수는 고형물의 농도가 1g/ℓ이하에서는 각 실험계마다 일정하였으며 현탁입자의 농도가 3-10g/ℓ범위에서는 고형물의 농도에 따라 감소하였다. 또한 최적 테일러 수는 현탁입자와 초분자 응집제의 농도를 함수로 하는 무차원 상관식으로 표현되었다. 최적 응집조건에서의 캠프 수는 1.37×10⁴-5.90×10⁴범위로 분산되는 경향을 보였다. The study on flocculation in a Couette flocculator showing Taylor vortices and subsequent solid-liquid separation characteristics was conducted experimentally. In this study silica or kaolin suspensions in water were used to investigate flocculation by cationic polymers. In the present experiments the optimum retention time was found to be about 150 seconds. The optimum Taylor number reached a constant value, when the suspension concentration was less than 1 g/ℓ. For the suspension concentration of 3-10 g/ℓ, the optimum Taylor number decreased with an increase in suspension concentration. With these results a correlation of the optimum Taylor number was obtained as a function of the suspension concentration and the flocculant concentration. The resulting Camp number at optimum conditions was found to scatter in the range of 1.37 x 10⁴-5.90×10⁴.