http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Y<sub>2</sub>Ba<sub>1</sub>Cu<sub>1</sub>O<sub>x</sub>공정을 이용한 TFA-MOC YBCO 박막 공정 개발
임준형,장석헌,김규태,이진성,윤경민,하홍수,주진호,나완수,Lim, Jun-Hyung,Jang, Seok-Hern,Kim, Kyu-Tae,Lee, Jin-Sung,Yoon, Kyung-Min,Ha, Hong-Soo,Joo, Jinho,Nah, Wansoo 한국세라믹학회 2006 한국세라믹학회지 Vol.43 No.2
YBCO film was synthesized by using a new approach to the TFA-MOD method. In the fabrication process, $Y_2Ba_1Cu_1O_x\;and\;Ba_3Cu_5O_8$ powders were used as precursors (the so called '211 process'), instead of Y-, Ba-, and Cu-based acetates, and dissolved in trifluoroacetic acid followed by calcining and firing heat treatment. Consequently, we successfully fabricated YBCO film and evaluated the phase formation, texture evolution, and critical properties as a function of the calcining and firing temperature and humidity, in order to explore its possible application in coated conductor fabrication. The films were calcined at $430-460^{\circ}C$ and then fired at $750-800^{\circ}C\;in\;a\;0-20\%$ humidified $Ar-O_2$ atmosphere. We observed that $BaF_2$ phase was effectively reduced and that a sharp and strong biaxial texture formed under humidified atmosphere leading to increased critical properties. In addition, we found that the microstructure varied significantly with the firing temperature: the grain grew further, the film became denser, and the degree of texture and phase purity varied as the firing temperature increased. For the film fired at $775^{\circ}C$ after calcining at $460^{\circ}C$, the critical current was obtained to be 39 A/cm-width (corresponding critical current density is $2.0\;MA/cm^2$ which was probably attributed to such factors as the enhanced phase purity and out-of-plane texture, the moderate film density and grain size, and crack-free surface.
211 공정을 이용한 새로운 TFA-MOD YBCO 박막 선재 제조
임준형,장석헌,김규태,이진성,윤경민,박의철,주진호,Lim, Jun-Hyung,Jang, Seok-Hern,Kim, Kyu-Tae,Lee, Jin-Sung,Yoon, Kyung-Min,Park, Eui-Cheol,Joo, Jin-Ho 한국초전도학회 2006 Progress in superconductivity Vol.7 No.2
We fabricated the YBCO films on single crystal $LaAlO_3$ substrates via a metal organic deposition (MOD) process. In the process, $Y_2Ba_1Cu_1O_x$ and $Ba_3Cu_5O_8$ powders were dissolved in trifluoroacetic acid (TFA) followed by calcining and firing heat treatments. To evaluate the effects of the firing temperature on YBCO phase formation and critical properties, the films were fired at $750^{\circ}C,\;775^{\circ}C\;and\;800^{\circ}C$ after calcining at $430^{\cric}C$. Microstructure observation indicated that a crack-free surface formed and a strong biaxial texture was developed. The FWHM of out-of-plane texture was measured to be in the range of $4.3^{\cric}-7.0^{\circ}$ for all the films. When the YBCO film was fired at $775^{\cric}C$, it had the highest critical properties: 88.5 K of critical temperature and 16 A/cm-width of critical current ($1MA/cm^2$ as critical current density). On the other hand, those properties were degraded as firing at $750^{\circ}C\;and\;800^{\circ}C$. It is considered that the improved critical values are partly owing to dense and homogeneous microstructure, strong texture, and high oxygen content.
임준형(Jun-Hyung Lim) 한국항만경제학회 2007 韓國港灣經濟學會誌 Vol.23 No.4
인천항 전체 수입과 품목별 수입이 경제변수로부터 어떻게 반응하고 어떤 행태를 보이는가를 보고자 한다. 이를 위하여 변수의 안정성 검정을 위한 단위근검정을 실시하며 모형의 강건성을 테스트하기 위한 공적분검정을 실시한다. 그 결과 변수와 모형이 안정적임이 확인되면 인천항의 수입함수를 추정한다. 그리고 오차수정모형을 통하여 인천항 수입의 실제치와 균형치 간의 괴리가 매월 제거되거나 수정되는 비율을 본다. 또한 시간 경과에 따라 변수의 동태성 점검을 위한 전향적 이동회귀를 실시한다. 이러한 결과로 인천항 수입에 있어서 환율은 섬유제품을 제외한 전체 수입과 품목에서 이론적 논리와 부합하고 있다. 그러나 환율계수는 전반적으로 낮아 환율변동에 대해 수입의 변동이 비탄력적이어서 환율의 수입조정능력이 크지 않는 것으로 나타나고 있다. 특히 농산물 수입의 환율탄력성은 대단히 낮을 뿐만 아니라 통계적으로도 유의하지 않아 인천항을 통한 농산물 수입은 환율에 거의 영향 받지 않고 있다. 소득변수인 국내경기는 양의 부호로 나타나 경기의 상승은 곧 수입의 증가로 이어지는 것을 의미한다. 섬유제품, 철강제품, 총수입, 광물성연료, 비철금속제품, 농산물 순으로 경기상승에 따른 탄력성을 보이고 있다. 따라서 본 논문의 의의는 인천항의 수입행태뿐만 아니라 주요 품목의 수입행태를 동시에 분석하였다는 데에 있다. 또한 인천항의 수입에 있어서 환율이나 경기와 같은 경제변수와 계절적 요인이 인천항 전체 수입과 품목별 수입에 어떠한 영향을 미치는가를 계측하고 이에 근거하여 전략을 수립하고 대비하는데 기여할 것으로 기대된다. This study porvides an empirical overview of the import patterns of Incheon port using an Engle-Granger cointegration technique and Johansen's multivariate cointegraion methodology test to check the stationarity of the model. The empirical results show that the import in Incheon port related to the economic variables. This paper also applies rolling regression to our model, indicating that import are endogeneous to the economic variable.