http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
멀티채널 방식에 의한 초미세 바늘 전극의 제작 및 빔 특성
임연찬,현정우,김성수,박철우,이종항,강승언 한국공작기계학회 2004 한국공작기계학회 춘계학술대회논문집 Vol.2004 No.-
An ultra-sharp tungsten electrode for field emission was manufactured by using an electrochemical etching method, and its beam characteristics were investigated. KOH and NaOH were the electrolytes used in this research, and the taper length of the tip varied form 150 μm to 250μm according to the applied voltage and the concentration of the electrolyte. The electron-beam stability was measured to be within 5% for a total emission current of 5 μA during 4 hours of operation, and the ignition voltages were found to be ~300 V. The tip radius was experimentally found to be 250A˚ from a linear fitting of Fowler-Nordheim plots, which was in remarkably good agreement with that of the image size from scanning ion-microscopy.
구동 온도와 방전관 길이에 따른 ICP 광원의 전기ㆍ광학적 특성
임연찬(Youn-Chan Yim),박대희(Dae Hee Park) 한국조명·전기설비학회 2008 조명·전기설비학회논문지 Vol.22 No.4
본 실험은 구동 온도와 방전관의 길이에 따라 변화하는 ICP 광원의 전기ㆍ광학적 특성에 대해서 알아보았다. 광원의 전기ㆍ광학적 특성이 정상상태에 놓이는 구동 조건을 확인하기 위하여 시간에 따른 전력 소모와 광속의 변화를 측정하였다. 전력소모와 광속의 시간에 따른 변화를 측정한 결과를 통해서 볼 때 최초구동에서 70분이 경과한 이후부터 전력소모는 초기값에 대해 1.45[%] 광속은 0.36[%]의 안정성을 나타냈다. 항온챔버 내에서 온도를 5구간으로 나뉘어 변화하면서 구동 온도에 따른 ICP 광원의 광학적 특성을 알아보았다. 휘도는 온도의 상승과 비례적으로 증가하였으나 46.7[℃] 이상에서는 오히려 감소하는 결과를 얻을 수 있었다. 파센법칙과 함께 보일-샤를의 법칙을 통해 0.02[Torr]의 압력이 변화함에 따라 더 높은 방전전압이 요구되지만 충분한 전압이 안정기에서 공급되지 못하기 때문이라 판단된다. 이와 더불어 방전관 길이에 따라 광원에 인가되는 전력과 전류을 측정하였다. We investigated the electro-optical characteristics of an ICP(Inductively Coupled Plasma) light source depending on driving temperature, and length of discharge tube. An electro-optical stability of a sample at operating was measured to see a steady state of a sample. In this results, we can see that a stability of power loss and luminous flux of a sample at operating of upper 70[min] was 1.45[%] and 0.36[%1 We measured the optical characteristics of a sample in a thermal chamber operated at a specific temperature divided into 5 steps. While luminance increased with temperature increasing, the decrement of luminance appeared at upper 46.7[℃]. According to Parchen's and Boyle-Charles' law, we can speculate that a pressure was increased and a higher voltage was needed but a ballaster having a rating power can't support a higher voltage corresponding to a pressure change, 0.02[Torr] at 46.7[℃]. Moreover, we measured an applied power and current of samples depending to a various length of a discharge tube.
로봇파노라마헤드와 스티칭 기법을 활용한 기가픽셀 이미지의 생성과 기가픽셀카메라 기술
최연찬,문희준,김동영,류재윤,신예랑,임천석,Choi, Yeon Chan,Moon, Hee Jun,Kim, Dong Young,Ryu, Jae Yun,Shin, Ye Rang,Rim, Cheon-Seog 한국광학회 2015 한국광학회지 Vol.26 No.1
현재의 이미지 센서기술은 메가픽셀 급에 한정되어 있는데 메가픽셀 급의 이미지 센서로 기가픽셀의 이미지를 생성하기 위해서는 필수적으로 중첩영역의 이미지를 하나로 합성하는 스티칭(stitching) 기법을 쓸 수밖에 없다. 본 논문에서는 로봇파노라마헤드와 스티칭 기법을 사용하여 기가픽셀카메라 기술의 전 과정을 탐구해 보았다. 그리고 이 과정을 통해서 얻어진 경험이나 이해를 바탕으로 듀크대와 BAE의 기가픽셀카메라 기술에 대해서도 설계해석을 시도해 보았다. 또 나아가, 새로운 기가픽셀카메라의 광학구조에 대한 모색도 시도해 보았다. 기가픽셀카메라 기술에서는 스티칭 작업과는 별도로 먼거리의 피사체 혹은 대기오염과 같은 원인으로 발생하는 흐릿한 영상부분을 보정하는 것이 필수적이라는 것도 파악되었다. Since the technology of current image sensors is limited to the megapixel class, it is necessary to use an image-stitching technique to create a gigapixel image from hundreds or thousands of photos taken by a megapixel image sensor. In this paper, we investigate the entire process of gigapixel camera technology employing a robotic panoramic head plus a stitching technique, and analyze the gigapixel camera technologies of Duke University and BAE Systems from the viewpoint of optical design structure. Hopefully this knowledge will lead to a new optical structure for a gigapixel camera. Meanwhile, we also perceive the need for additional image processing to reduce the noise of photos with a background of fog and mist, taken far from the camera lens.
최연찬,임천석,Choi, Yeon-Chan,Rim, Cheon-Seog 한국광학회 2018 한국광학회지 Vol.29 No.4
본 연구에서는 다수의 요소렌즈들로 이루어진 렌즈시스템을 단순화 및 구조화할 수 있는, 저자들만의 독창적인 설계기법인, 일반화된 구조설계 방정식을 제안하고 이를 통해 스마트폰 카메라 렌즈와 연동될 수 있는 텔레센트릭 렌즈의 존재 가능성 및 설계방법을 탐구하였다. 결과적으로, 텔레센트릭 렌즈 시스템을 모듈화하고 조립설계 할 수 있는 $f{\theta}$ 공식을 도출 및 검증할 수 있었고, 이 공식으로부터 공장자동화와 같은 머신비전에 효과적으로 활용될 수 있는 스마트폰용 텔레센트릭 렌즈를 설계할 수 있었다. A generalized structural design equation can be used to simplify and systematize a telecentric lens system composed of multiple lenses, as a creative design method of the authors. Through this structural equation, we have investigated the feasibility and design methodology of a telecentric lens equipped with a conventional smartphone camera for machine vision. As a result, we could verify and present a useful, generalized structural equation termed the $f{\theta}$ formula, being able to divide and combine the whole telecentric lens system into two modularized lens groups.
현정우,임연찬,김성수,박철우,이종항,강승언 한국공작기계학회 2004 한국공작기계학회 춘계학술대회논문집 Vol.2004 No.-
Previous studies on the liquid Gallium ion sources used an electro-chemically etched tungsten wire with a coil-type heater. Such a structure requires excessive power consumption in the course of heating the liquid metal. In this work, a new structure is proposed that replaces the coil-type heater. It uses a Gallium reservoir made of six pre-etched 250 μm tungsten wires that surround the needle electrode. Gallium loading at the reservoir is observed to be much more stable, resulting in an improved beam stability.
갈륨액체금속 이온원과 인듐액체금속 이온원의 빔 특성에 대한 연구
현정우,임연찬,정강원,정원희,박철우,이종향,강승언 한국공작기계학회 2005 한국공작기계학회 춘계학술대회논문집 Vol.2005 No.-
본 연구에서는 인듐 액체금속이온원을 제작하여 빔 특성에 대해 연구를 하였으며, 기존에 연구를 하였던 갈륨 액체금속이온원의 빔특성과 비교 분석 하였다. 빔특성 분석을 위해 빔 안정도, 전류-전압특성곡선, 에너지 퍼짐을 측정하였다. 액체금속이온원에 사용되는 액체금속 저장소 및 바늘전극(tip)은 500μm의 직경을 갖는 텅스텐을 사용하였으며, 국내에서 제작된 제품을 사용하였다. 액체금속 저장소의 구조는 이전에 구상하여 연구가 이루어진 6개의 pre-etching된 텅스텐와이어(wire)가 묶여진 형태를 사용하였다.
현정우,임연찬,김성수,오현주,박철우,이종항,최은하,서윤호,강승언,Hyun J. W.,Yim Youn Chan,Kim Seuong Soo,Oh Hyun Joo,Park Cheol Woo,Lee Jong Hang,Choi Eun Ha,Seo Yunho,Kang Seung Oun 한국진공학회 2004 Applied Science and Convergence Technology Vol.13 No.4
이전의 연구에서의 소스 형태는 전기화학적 방법으로 에칭된 텅스텐 선에 코일형태의 히터를 부착한 것으로 액체금속을 직접 가열하는 방법이었다. 이전의 모델에서는 액체금속을 가열하는 과정에서 코일형태의 히터에 대한 과다한 전력소모가 발생함으로써 본 연구에서는 코일형태의 히터를 대체할 수 있는 새로운 방법을 제시하고 그의 특성을 연구하였다. Pre-etching된 250$\mu\textrm{m}$의 텅스텐 선을 7mm 단위로 절단, 이를 갈륨저장소로 만든 형태이다. 가열방식은 직접방식으로 갈륨을 저장소에 적재(loading)하는 과정과 빔의 안정도가 이전의 방법보다 더욱 향상되었음을 본 연구의 결과를 통해 볼 수 있다. Previous studies on the liquid Gallium ion sources used an electro-chemically etched tungsten wire with a coil-type heater. Such a structure requires excessive power consumption in the course of heating the liquid metal. In this work, a new structure is proposed that replaces the coil-type heater. It uses a Gallium reservoir made of six pre-etched 250$\mu\textrm{m}$ tungsten wires that surround the needle electrode. Gallium trading at the reservoir is observed to be much more stable, resulting in an improved beam stability.