http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
습식배연탈황공정에서 SO2 흡수에 대한 혼합 유기산 첨가제의 효과
이형근,김은호,김인원,이재천 한국화학공학회 1998 Korean Chemical Engineering Research(HWAHAK KONGHA Vol.36 No.5
습식배연탈황공정의 SO₂제거효율이 낮은 공정이나 또는 스케일의 형성, 석회석 이용도의 저하 등 여러 문제가 발생된 공정을 대상으로 공정 설비를 교체 또는 보수하지 않고 반응용액 중에 첨가제를 주입하여 제거효율을 높일 수 있다. 첨가제로서의 유기산 용액은 물질전달속도를 향상시키는 역할을 한다. 본 연구에서는 기술적 신뢰성과 SO₂제거효율을 향상시킬 수 있는 첨가제의 특성을 연구하였다. 첨가제의 영향을 고려한 석회석의 반응성을 예측하기 위하여 평형반응과 approximate surface renewal theory를 이용한 모델을 구성하고 수치해를 구할 수 있는 알고리즘을 개발하였다. 또한 enhancement factor를 증가시키기 위한 첨가제 선택기준을 제시하고 부산물로 생산된 유기산 혼합 용액의 효과와 선택성에 관한 모사를 수행하였다. In the existing wet flue gas desulfurization processes which have problems of low SO₂ removal efficiency, formation of scale and low limestone utilization, the adding additives to the reactants help enhance SO₂ removal. This is quite attractive since no process changes or large capital expenditure are needed. The organic acid additives enhance the rate if mass transfer. In this work, the properties of additives were studied to improve the reliability and to increase SO₂ removal efficiency. SO₂ absorption into organic solution were modeled by approximate surface removal theory and equilibrium reaction equations and a solution algorithm for numerical solution was developed. Also the criteria of selection of additives were suggested. The mass transfer enhancement by mixed organic acid, which was a byproduct of a company, was tested theoretically as an inexpensive alternative additive.
폴리이미드 중공사막을 이용한 H2S/CH4 투과거동에 관한 연구
이형근,안영모,김대훈,조항대,서용석,박영성 한국막학회 2009 멤브레인 Vol.19 No.4
폴리이미드는 유리상 고분자로서 높은 화학적 저항성과 열적 안정성을 지니고 있으며, 기계적 물성이 거의 변하지 않는다. 본 연구에서는 황화수소와 메탄의 투과특성을 알아보기 위하여 폴리이미드 중공사막을 건/습식 상전이 공정에 의하여 제조하였고, 제조된 중공사막의 구조 및 실리콘 코팅 전/후의 황화수소와 메탄의 투과특성에 대하여 알아보았다. 압력이 증가함에 따라 황화수소의 투과도는 가소화 현상으로 인해 증가하였고, 황화수소와 메탄의 선택도 역시 증가하는 것으로 나타났다. 실험에 사용된 세 종류의 막 가운데 KSM03b의 투과도와 KSM03d의 선택도가 가장 높은 것으로 나타났다. air gap이 증가 할수록 투과도는 감소하지만 선택도는 증가하였다. 또한 실리콘 코팅 후 투과도는 감소하였지만, 선택도는 증가하였고 7기압에서 KSM03d의 선택도는 275이었다. Polyimide which is the glassy polymer has high chemical resistance, thermal stability and high mechanical property. In this study, the polyimide hollow fiber membranes were prepared by the dry-jet wet phase inversion in order to investigate the permeation porperties of the H2S and CH4. The morphology of prepared hollow fiber membranes and their permeation behaviors of H2S and CH4 before and after silicon coating were evaluated. The permeance of H2S and H2S/CH4 selectivity increased due to plasticization with increasing the feed pressure. The permeance of KSM03b and selectivity of KSM03d were highest among the three type membranes used this experiments. The permeance decreased but the H2S/CH4 selectivity increased with increasing the air gap. The permeance reduced after silicon coating. However, the selectivity increased and the selectivity of KSM03d was 275 at 7 atm.
이형근,김영준,조원일,Lee, H.G.,Kim, Y.J.,Cho, W.I. 한국전기화학회 2007 한국전기화학회지 Vol.10 No.1
이 리뷰를 통하여, 휴대폰용 리튬이차전지의 최근 기술동향을 설명하였다. 휴대폰용 이차전지로는 니카드, 니켈-금속수소, 리튬이온 혹은 리튬이온폴리머의 세 가지 형태의 전지가 있으며, 리튬 이차전지가 에너지밀도 측면에서 가장 성능이 우수하다. 즉, 동일한 용량을 갖는 이차전지 가운데 가장 작고 가벼운 것은 리튬이차전지이다. 이러한 리튬이차전지의 시장은 매년 약 15%의 높은 성장을 기록하고 있다. 연구개발은 $LiFePO_4$를 포함하는 새로운 양극, $Li_4Ti_5O_{10}$, Si, 주석 등의 새로운 음극소재, 새로운 전해질과 안정성 확보에 관한 것을 중심으로 진행되고 있다. In this review article, we are going to explain the recent development of lithium secondary batteries for a cellular phone. There are three kinds of rechargeable batteries for cellular phones such as nickel-cadmium, nickel-metal hydride, and lithium ion or lithium ion polymer. The lithium secondary battery is one of the most excellent battery in the point of view of energy density. It means very small and light one among same capacity batteries is the lithium secondary battery. The market volume of lithium secondary batteries increases steeply about 15% annually. The trend of R&D is focused on novel cathode materials including $LiFePO_4$, novel anode materials such as lithium titanate, silicon, and tin, elecrolytes, and safety insurance.