http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Al 7050 단조품 표면의 입도성장층 방지에 관한 연구
이정환,이상용,이영선,Lee, Jeong-Hwan,Lee, Sang-Yong,Lee, Yeong-Seon 한국기계연구원 1996 硏究論文集 Vol.26 No.-
Age hardenable aluminium alloys show high specific strength, good thermal and electrical conductivity as well as lightness, and are typical aircraft materials. High fatigue strength and good resistancy against stress corrosion cracking are also important for aircraft aluminium alloys. Al alloy 7050 has been developed to meet the above mentioned requirements and the use of this alloy as forged aircraft part becomes more important. However, forged 7050 parts showed undersiable structures such as severe local grain coarsening in surface area and unproper metal flow that is degrading mechanical properties. In this paper, microstructural aspects of die forging in the Al alloy 7050 are investigated. Also suggested are the optimal forging conditions for microstructural control of Al alloy 7050.
자외선 및 블루영역 차단 화장품 응용을 위한 박막 판형 인공 칼라민 소재의 합성 및 특성 평가 연구
이정환,이건섭,조동현,홍다희,유재훈,곽지유,이희철,Lee, Jung-Hwan,Lee, Gun-Sub,Jo, Dong-Hyeon,Hong, Da-Hee,Yu, Jae-Hoon,Gwack, Ji-Yoo,Lee, Hee-Chul 대한화장품학회 2021 대한화장품학회지 Vol.47 No.3
자외선 및 블루영역 차단 기능을 갖는 화장품의 원료로 사용되기 위한 박막 판형의 ZnO 및 Fe<sub>2</sub>O<sub>3</sub> 성분을 포함하는 인공 칼라민 세라믹 분말 소재를 합성하였다. 20 : 1에서 50 : 1 범위의 높은 종횡비를 가지는 (0001)면의 판형 ZnO 세라믹 분말 소재는 아연공기전지로 전력 생산한 후에 회수한 전해질을 출발 물질로 하여 징크아세테이트와 소듐시트레이트 혼합 용액에서 중화반응을 통한 석출로 합성하였다. 아이언 클로라이드 용액의 첨가량을 증가시키는 방법으로 인공 칼라민 세라믹 분말 내의 Fe<sub>2</sub>O<sub>3</sub> 함량을 높일 수 있었으며, 이 경우 자외선뿐만 아니라 가시광선의 블루 영역을 일부 흡수하였다. 포타슘 아세테이트 용액을 첨가시킬 경우에는 Zn(OH)<sub>4</sub><sup>2-</sup> 음이온의 분해를 촉진하여 (0001) 면 위에 수직 방향으로 격벽 형태로 성장한 박막을 얻을 수 있었는데, 이 경우 자외선을 흡수할 수 있는 기회가 증가하면서 자외선 흡수율이 증가하였다. 아이언 클로라이드 용액과 포타슘 아세테이트 용액의 첨가량을 함께 조절하면 박막 판형의 인공 칼라민 세라믹 분말의 조성 및 형상을 최적화시킬 수 있어서 화장품 제형을 진행할 경우 블루영역의 광투과도가 크게 감소하였다. In this study, we have prepared pure planar-type ZnO and calamine powder containing both ZnO and Fe<sub>2</sub>O<sub>3</sub> components as a raw material for cosmetics with UV and blue band blocking functions. The planar-type ZnO ceramic powder having a high aspect ratio in the range of 20:1 to 50:1 was synthesized by precipitation method in a zinc acetate and sodium citrate mixed solution with the electrolyte obtained by power generation with a zinc-air battery. The content of Fe<sub>2</sub>O<sub>3</sub> in the artificial calamine ceramic powder could be increased by increasing the amount of iron chloride solution added, and in this case, some of the blue region of visible light and ultraviolet light were remarkably absorbed. When potassium acetate was added, the decomposition of the Zn(OH)<sub>4</sub><sup>2-</sup> anion in the solution was promoted to facilitate the growth of ZnO crystal in the form of a barrier wall in the vertical direction on the (0001) plane, which could increase UV absorption by providing more opportunities. By controlling the amount of iron chloride solution and potassium acetate solution added, the composition and shape of the thin film plate-shaped artificial calamine ceramic powder can be optimized, and when applied to cosmetic formulations, the light transmittance of the blue region can be greatly reduced.
A Case of Metastatic Eccrine Porocarcinoma with a Review of the Literatures
이정환,임주한,김루시아,김철수,이현규,나소연,김성현,정지중,이명동,예재호,이문희,Lee, Jung-Hwan,Lim, Joo-Han,Kim, Lucia,Kim, Chu-Soo,Yi, Hyeon-Gyu,Nah, So-Yun,Kim, Seong-Hyun,Jeong, Ji-Joong,Lee, Myung-Dong,Ye, Jea-Ho,Lee, Moon-Hee The Korean Society for Head and Neck Oncology 2011 대한두경부 종양학회지 Vol.27 No.2
에크린 한공암종은 흔하지 않으며, 전이성 에크린 한공암종은 매우 드문 암이다. 에크린 한공암종은 표피내 한관에서 기원하는 피부 부속기 악성 종양으로, 대부분 에크린 한공암종은 항암치료와 방사선치료에 효과가 없으며, 따라서 유일한 치료방법은 전이되기 전에 국소 및 광범위 절제술을 시행하여야 한다. 본 환자는 두피에 발생한 에크린 한공암종이 점점 진행하여 피부, 림프절, 폐 등으로 전이하였고, 다수의 광범위 절제술에 이어 항암치료와 방사선치료를 받았지만, 결국 폐전이가 악화되어 사망하였다. 본 저자들은 항암치료와 방사선치료에 불응한 에크린 한공암종 1예를 치료에 대한 문헌고찰과 더불어 보고하는 바이다.
손 동작 스캔을 이용한 잔뇨량 측정용 초음파 방광 스캐너
이정환,배정호,이수열,조민형,Lee, Jung Hwan,Bae, Jung Ho,Lee, Soo Yeol,Cho, Min Hyoung 대한의용생체공학회 2018 의공학회지 Vol.39 No.4
3D ultrasound bladder scanners are getting popular in hospitals for the patients with bladder dysfunction. A current bladder scanner adopts a mechanical scan to acquire 3D images and requires two motors and complicated mechanical devices. In this paper, we propose a new ultrasound bladder scanner using hand-motion scan. Instead of two motors and mechanical devices, it has a motion sensor to record transducer positions during hand-motion scan. The experiments with a bladder phantom and volunteers showed similar measurement accuracy to a conventional 3D ultrasound bladder scanner. We expect that the proposed method will reduce the cost and size of the bladder scanner.
이정환,윤경호,배대경,어재형,김정원,박수연,Lee, Jung-Hwan,Yoon, Kyoung-Ho,Bae, Dae-Kyung,Eo, Jae-Hyoung,Kim, Jeong-Weon,Park, Soo-Yeon 대한관절경학회 2008 대한관절경학회지 Vol.12 No.1
목적: 전방십자인대 파열 시 손상 시기와 원인에 따른 동반 손상의 빈도 및 양상을 비교하여 평가하고자 하였다. 대상 및 방법: 전방십자인대 재건술을 시행하였던 547례의 슬관절을 대상으로 손상 시기(급성과 만성), 손상 원인(운동과 비운동) 및 운동 종목에 따라 동반 손상의 빈도와 양상을 후향적으로 비교 분석하였다. 결과: 손상 시기에 따라 수상 후 3개월 이내는 급성으로, 3개월 이후는 만성으로 분류하였으며 급성 손상군에서 내측 측부 인대 손상 및 골 좌상이 많았고 만성 손상군에서는 내측 및 외측 반월상 연골 손상의 빈도가 유의하게 높았다(p=0.014, 0.029). 연골 손상은 급성 손상군의 경우 대퇴 활차부에(p=0.027), 만성 손상군의 경우 대퇴 내과에 많았고(p=0.011), Grade I, II의 연골 손상은 급성 손상군에(p=0.016), Grade III, IV의 손상은 만성 손상군에(p=0.017) 많았다. 손상 원인에 따른 차이로는 운동 손상군에서 외측 반월상 연골 손상의 빈도가 높았으며(p=0.035) 비운동 손상군에서 대퇴 내과의 연골 손상이(p=0.010) 유의하게 많았다. 운동 종목 별로는 스키에서 내측 측부 인대 손상이(p=0.005), 체조에서 연골 손상이(p=0.017) 다른 종목에 비해 많았다. 결론: 내측 및 외측 반월상 연골 손상, 심한 연골 손상의 빈도는 만성 손상군에서 높았고 손상 원인과 운동 종목에 따른 동반 손상의 빈도 및 양상에 차이가 있었다. Purpose: We purposed to analyze the incidence and the patterns of the injuries associated with anterior cruciate ligament(ACL) tears. Materials and Methods: We retrospectively reviewed 547 knees that had undergone ACL reconstructions and compared the associated injuries according to the time of injury(acute vs. chronic), the cause of injury(sports vs. non-sports) and the type of sports. Results: Medial collateral ligament(MCL) injury and bone contusion were more in acute injury group less than 3 months after trauma(p=0.001, 0.019) and the injuries of medial or lateral meniscus were more in chronic injury group more than 3 months after trauma(p=0.014, 0.029). The trochlea in acute injury group(p=0.027) and the medial femoral condyle in chronic injury group(p=0.011) had higher incidence of chondral injury. Grade I, II chondral injury was frequent in acute injury group(p=0.016) and grade III, IV chondral injury was frequent in chronic injury group(p=0.017). Lateral meniscus injury was frequent in sports injury group(P=0.035). Medial collateral ligament injury was frequent in ski(P=0.005), and chondral injury was in gymnastics(P=0.017). Conclusions: The incidences of medial and lateral meniscus tears and grade III, IV chondral defects were high in chronic injury group. According to the causes of the tears and the types of sports, some differences in the incidence and pattern of associated injuries were found.
Resin bonding of metal brackets to glazed zirconia with a porcelain primer
이정환,Milim Lee,Kyoung-Nam Kim,Chung-Ju Hwang 대한치과교정학회 2015 대한치과교정학회지 Vol.45 No.6
Objective: The aims of this study were to compare the shear bond strength between orthodontic metal brackets and glazed zirconia using different types of primer before applying resin cement and to determine which primer was more effective. Methods: Zirconia blocks were milled and embedded in acrylic resin and randomly assigned to one of four groups: nonglazed zirconia with sandblasting and zirconia primer (NZ); glazed zirconia with sandblasting, etching, and zirconia primer (GZ); glazed zirconia with sandblasting, etching, and porcelain primer (GP); and glazed zirconia with sandblasting, etching, zirconia primer, and porcelain primer (GZP). A stainless steel metal bracket was bonded to each target surface with resin cement, and all specimens underwent thermal cycling. The shear bond strength of the specimens was measured by a universal testing machine. A scanning electron microscope, three-dimensional optical surface-profiler, and stereoscopic microscope were used to image the zirconia surfaces. The data were analyzed with one-way analyses of variance and the Fisher exact test. Results: Group GZ showed significantly lower shear bond strength than did the other groups. No statistically significant differences were found among groups NZ, GP, and GZP. All specimens in group GZ showed adhesive failure between the zirconia and resin cement. In groups NZ and GP, bonding failed at the interface between the resin cement and bracket base or showed complex adhesive and cohesive failure. Conclusions: Porcelain primer is the more appropriate choice for bonding a metal bracket to the surface of a full-contour glazed zirconia crown with resin cement.