http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
고분말도 시멘트와 플라이애시를 사용한 콘크리트의 물리적 특성
이영도,하정수,김한식 한국건축시공학회 2019 한국건축시공학회지 Vol.19 No.4
The cement industry is considered a major industry for reducing greenhouse gases, increasing the amount of binding materials that can replace cement in concrete is known as the most effective method for reducing carbon dioxide. Therefore, research is being carried out to utilize large quantities of by-products that can be used as alternatives to cement. However, there are problems with reduced strength at early age and retarded setting for major reasons that do not increase the amount of mixture of binders used to replace cement. Thus, in this study, normal cement and high-fineness cement were used and physical properties were reviewed by placing differences in fly ash usage depending on the type of cement. As a result, the characteristics of strength were similar, and the hydration temperature was the same level. Also, the durability test showed that the length change, carbonation resistance were better than those of normal cement. Therefore, it is confirmed that the use of high-fineness cement is effective to reduce the amount of cement used and using more by-products. 시멘트 산업은 온실가스 감축을 위한 주요 산업분야로 고려되고 있으며, 콘크리트에 시멘트를 대체할 수 있는 재료의 사용량을 증가시키는 것은 이산화탄소 감축을 위해 효과적인 방법으로 알려져 있다. 따라서 시멘트의 일부를 대체하여 사용할 수 있는 산업부산물을 다량으로 활용하기 위한 연구가 진행되고 있다. 그러나 산업부산물의 혼합량을 증가시키지 못하는 큰 이유로 초기강도 저하와 응결지연에 대한 문제점이 있다. 따라서 이 연구에서는 보통 시멘트를 사용한 경우와 고분말도 시멘트를 사용한 경우에 대해 플라이애시의 사용량에 차이를 두고 물리적 특성을 검토하여, 시멘트의 사용량을 줄이고 산업부산물을 다량으로 사용하기 위한 방안으로서, 고분말도 시멘트를 활용한 결과에 대한 기초 자료를 제시하였다.
이영도,정상진 한국건축시공학회 2005 한국건축시공학회지 Vol.5 No.1
Classified with concrete as placing ways - direct ways, sheath way - and placing directing - flange direction, web direction - is analyzed section and strength of hardened concrete. The results of this study is belows the more fluid of concrete, the more useful to top-down method.To minimize the voids of the reverse placement joints, It is more effect to use the sheath method than direct method in concrete placement. If the joint face is a plane, it is impossible to extract the air bubbles which caused voids, so we should consider about this, and decide to select which type of joints.
초음파를 이용한 역타기둥 이음부의 공극특성에 관한 연구
이영도,정상진 한국건축시공학회 2001 한국건축시공학회지 Vol.1 No.2
When top down method is used, it could be a construction method trouble in column joint, between the former concrete and the latter. It could bring a void and weak concrete in column. The purpose of this study is finding a way to prevent concrete void and concrete suitable for top down , through V-metering for top down column and concrete experiment. To minimize the void of reverse placement joint, It is more effect to use the sheath method then direct method in concrete placement.