http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
초고압 전력 케이블 접속 시스템을 위한 접속재의 최적화 해석
이양창(Lee, Yang-Chang),류정현(Ryu, Jeong-Hyun),한봉수(Han, Bong-Soo),이준성(Lee, Joon-Seong),이호정(Lee, Ho-Jeong),최윤종(Choi, Yoon-Jong) 한국산학기술학회 2009 한국산학기술학회 학술대회 Vol.- No.-
본 논문은 초고압 전력케이블의 접속재 개발을 위한 연구결과로써, 접속시스템의 핵심기술인 고절연고무슬리브 및 현장에서 접속 작업의 용이성을 위한 Carrier Pipe의 구조해석과 전기적 절연설계에 의한 주요부의 전기적 특성과 전계의 집중을 완화하기 위해 Simulation Tool을 이용한 수치해석 등을실시하여 최적화된 제품을 제작하였다. 절연설계 및 전계완화 해석에서는 고절연 고무슬리브 구조에서전계가 집중될 수 있는 중요 포인트를 벡터로 선정하였고 이를 기초로 전계해석을 진행하여 선정된포인트들에서 전계가 집중됨을 검증하였다. 접속재의 수축거동 해석에 의하면, Carrier Pipe의 구조적안전성을 확보하기 위하여 고절연 고무슬리브로부터의 압력을 구하여 계산한 결과 최소한 9mm이상의Carrier Pipe 두께가 필요한 것으로 파악 되었다. 이것은 충분한 강도뿐만 아니라 Carrier Pipe의 변형발생으로 인한 현장에서의 설치문제까지 고려하게 된 값이다. 고절연 고무슬리브 제품설계 에서는 고절연 고무슬리브의 특성조건을 설정하였고 고절연 고무슬리브 제품 및 Carrier Pipe의 Interface 설계기준을 파악하기 위하여 기존의 고절연 고무슬리브를 활용하여 Carrier Pipe와의 장착 Test를 진행하였다. 그 결과, 확장비율 110%로 적용하였을 경우는 30시간 후에는 완전 붕괴가 되었고, 붕괴가 시작되는 지점이 고절연 고무슬리브의 중앙매립전극 경계면으로써, Simulation Tool을 활용한 접속재 수축거동 해석 결과와도 일치함을 검증 할 수 있었다.
Automatic Mesh Generation System for a Novel FEM Modeling Based on Fuzzy Theory
이양창(Yang-Chang Lee),이준성(Joon-Seong Lee),최윤종(Yoon-Jong Choi),김남용(Nam-Yong Kim) 한국지능시스템학회 2005 한국지능시스템학회논문지 Vol.15 No.3
This paper describes an automatic finite element (FE) mesh generation for three-dimensional structures consisting of free-form surfaces. This mesh generation process consists of three subprocesses: (a) definition of geometric model, i.e. analysis model, (b) generation of nodes, and (c) generation of elements. One of commercial solid modelers is employed for three-dimensional solid structures. Node is generated if its distance from existing node points is similar to the node spacing function at the point. The node spacing function is well controlled by the fuzzy knowledge processing. The Delaunay method is introduced as a basic tool for element generation. Automatic generation of FE meshes for three-dimensional solid structures holds great benefits for analyses. Practical performances of the present system are demonstrated through several mesh generations for three-dimensional complex geometry.
이양창(Lee, Yang-Chang),이준성(Lee, Joon-Seong),이호정(Lee, Ho-Jeong),류정현(Ryu, Jeong-Hyun) 한국산학기술학회 2010 한국산학기술학회논문지 Vol.11 No.1
본 논문은 초고압 전력케이블의 접속재 개발을 위한 연구결과로써, 접속시스템의 핵심기술인 고절연 고무슬 리브의 현장 접속 작업의 용이성을 위한 Carrier Pipe의 구조해석과 주요부의 전기적 특성과 전계의 집중을 완화하기 위한 수치해석 등을 실시하여 구조적 안정성을 평가하려 한다. 절연설계 및 전계완화 해석에 의한 검증과 접속재의 수축거동 해석에 의한 Carrier Pipe의 최적화된 형상으로 두께가 최소 9mm이상을 갖는 Carrier Pipe가 필요하며, 전 기적 전계완화 해석결과 고절연 고무슬리브의 중앙매립전극 경계면으로써, 접속재 수축거동 해석 결과와도 일치함을 검증할 수 있었다. This paper represents the results of study on Extra High Voltage Power Cable Connection System Development. The purpose is to evaluate structural safety by numerical analysis for the relaxation of electric field concentration and by structural analysis of Carrier Pipe for easy installation of High Insulating Rubber Sleeve in the field, which is core technique of connection system. According to the results, the thickness of Carrier Pipe needs at least 9mm by optimization analysis of deformation behavior and insulating design & relaxation of electric field concentration. The result of contraction behavior of the connection part can be demonstrated with the same result of electric field relaxation analysis at the boundary of the electrode inserted into the insulating rubber sleeve.